Cleveland MKEL-100-T User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
MIXER KETTLES
MIXER KETTLE, ELECTRIC
LEG MOUNTED, CONSOLE TYPE
2/3 JACKETED, TILTING
Cleveland Standard Features
II
olid State Temperature Control (±1°F) for perfect
S
simmering
II
Solid State Low Water Safety Control
II
Steam jacket filled with treated water, venting and/or refilling is
not required
II
50 psi Safety Valve and Steam Jacket Rating
II
No Water Gauge required
II
Rear mounted Pressure/Vacuum Gauge and Pressure Relief
Valve
II
Infinitely variable Scraper Speed Control from 0-40 rpm
II
Infinitely Variable Ratio between Scraper And Agitator: Agitator
rotates from 0-8 times the speed of the Scraper
II
Removable (without tools) Nylon Blades scape entire Jacketed
surface
II
3 Horsepower Hydraulic powered Agitator, Scraper and Bridge
Lift
II
Safety device prevents high speed starts
II
Mixer stop when Bridge is lifted
II
Agitator and Scraper are bayonet mounted for easy removal
II
Tilt mechanism of Roller Bearings and case hardened
Self-Locking worm and segment gear
II
Hot and Cold Water Faucets
II
2" diameter Tangent Draw-Off Valve with Drain Strainer
II
All Plumbing , Electrical and Hydraulics enclosed in Stainless
Steel Consoles
II
Enclosed, 10 Gauge Stainless Steel hydraulically operated
Mixer Bridge
II
Kettle and all exterior surfaces are Stainless Steel
II
Level adjustable feet (flanged for bolting)
II
Large Pouring Lip
II
Gallon Markings stamped into Scraper Shaft
II
Standard 208-240 volts, 60 Hz, 3 phase, 4 wire, high wattage
II
Typical approvals include UL., CSA, CE, NSF and ASME
Options & Accessories
Ë Covers (MTP)
Ë Product Time/Temperature Controls and Indicators
Ë Food Strainer (FS-20)
Ë Flow Diverter (FD)
Ë Pan Carrier (PCK)
Ë Swing Funnels (SF-1 or SF-2)
Ë Alternate Mounting Systems (wall)
MODELS: MKEL-40-T MKEL-80-T
MKEL-60-T MKEL-100-T
Shown with optional Power Tilt
Short Form Specifications
Shall be CLEVELAND, Model MKEL- _____ -T, console/Leg mounted, Electric
Mixer Kettle with permanently filled Steam Jacket; 50 psi Kettle Jacket Rating
and Safety Valve, High Wattage standard, Solid State Temperature (±1°F)
and Low Water Safety Controls. 3 H.P. Hydraulic powered Scraper/Agitator
and Bridge Lift. 0-40 rpm Scraper Speed with Variable Scraper to Agitator
Ratio from 1-1 to 8-1. Stainless Steel enclosed Mixer Bridge. All Plumbing,
Electrical and Hydraulics enclosed in Consoles. Gallon Markings. Safety
Device prevent high speed starts. Safety Device prevents high speed starts;
Mixer stops when Bridge is lifted. Bayonet Mounted Agitator and Scraper.
2" Tangent Draw-0ff Valve. Hot and Cold Water Faucet. Kettle and all exterior surfaces are Stainless Steel.
Ë Power Tilt (PT)
Ë Kettle Accessory Kit (KAK) includes:
Ë Clean-up Brush (CB) Ë 36˝ Kettle Paddle (KP)
Ë 36˝ Kettle Whip (KW) Ë 36˝ Kettle Brush (KB)
Ë Draw-off Brush (DB) Ë 24 oz. Ladle (KL)
Ë Type 316 Stainless Steel Interior for high acid food
products (316-20G)
Ë Water Meter (GMF or LMF) Wall Mount or on Stand (SWM)
Ë Leg Extensions
Ë Voltages (VOS) other than standard
SECT. XI PAGE 5
0609
C
(I.D.)
H
(TRUNNION)
G
D
K
X
26.50"
673mm
2" (51mm) TANGENT
DRAW OFF VALVE
KETTLE
LIP IN
TILTED
POSITION
6.50" (165mm)
21.00"
533mm
3.00"
76mm
8
.75"
222mm
E
F
7.25"
184mm
3.25"
3.00"
76mm
83mm
H C
H C
R
EAR OF
CONSOLE
SEE FLANGED
FOOT DETAIL
SEE
RECOMMENDED
FLOOR SLOPE
F
LOOR
DRAIN
GRATE
M
N
O
P
B
+
0.125 (3.18mm), - 0
1
8"
475mm
5" (127mm)
10"
2
54mm
13"
3
30mm
5.00"
1
27mm
5.75"
146mm
5.75"
146mm
SR
L
18" (457mm)
Recomended
0 = Minimum
U
(
DRAIN
GRATE)
V
(DRAIN
GRATE)
Q
0
.56"
14mm
1
20º
T
YP
1
.00" (25mm)
MAX. ADJUSTMENT
1
.625" (42mm)
Ø
FLANGED FOOT DETAIL
0.44" (1 1mm) Ø
3
HOLES ON
3
.125" (80MM)
Ø
B
.C.D.
4 7/8"
124 Ø
mm
F
LOOR SLOPE = 1.00" (26mm) per 4' (1220mm)
R
ECOMMENDED FLOOR SLOPE
PIPE DRAIN RECOMMENDED
min. valve size plus 1.00" (26mm)
6.00" (153mm) RECOMMENDED
4.00" (102mm) MINIMUM
Y
COVER
FULLY
OPEN
40/150 58.50
1486
26.00
660
43.25
1099
52.75
1340
72.00
1829
10.25
260
23.13
587
55.75
1416
11.00
279
27.38
695
39.88
1013
36.00
915
18.38
467
28.00
711
38.00
965
5.63
143
27.00
686
30.00
762
44.00
1118
18.25
464
76.00
1930
GAL/LIT B C D E F G H J K ML N0PQRSUVXY
60/225 62.00
1
575
29.50
7
50
43.25
1
099
52.75
1
340
73.00
1
854
10.25
2
60
23.13
5
87
57.50
1
460
6.63
1
68
27.38
6
95
42.13
1
070
36.00
9
15
18.38
4
67
28.00
7
11
41.50
1
054
6.50
1
65
29.50
7
49
31.00
7
87
45.00
1
143
14.75
3
75
79.00
2
007
80/300 65.50
1
664
33.00
8
38
45.75
1
162
55.25
1
403
79.00
2
007
12.75
3
24
26.38
6
70
59.00
1
500
6.63
1
68
32.63
7
78
46.38
1
178
39.25
9
97
21.63
5
49
31.25
7
94
45.00
1
143
7.38
1
87
31.38
7
97
35.00
8
89
46.00
1
168
15.00
3
81
84.00
2
134
100/375 68.00
1727
35.50
902
47.75
1213
57.25
1454
82.00
2083
14.75
375
26.38
670
61.00
1550
6.00
152
32.63
778
47.63
1210
39.25
997
21.63
549
31.25
794
47.50
1207
8.00
203
33.00
838
36.00
914
47.00
1194
15.00
381
89.00
2261
16.00
406
Z
18.25
4
64
19.13
4
86
20.75
527
35.75
980
A1
37.50
9
53
42.75
1
086
43.75
1111
39.00
991
A2
40.75
1
035
46.00
1
168
47.00
1194
DIMENSIONS ("/mm)
Z
A2
A1
Supply
200 3360 22684 81.6 3
208 3360 24535 83.8 3
220 3360 27448 87.1 2
230 3360 30000 90.0 2
240 3360 32665 92.8 2
MKEL-40-T
380 3360 25153 47.1 6
400 3360 27871 48.8 6
415 3360 30000 50.1 6
ELECTRICAL - HIGH WATTAGE
440 3360 27448 44.1 6
480 3360 32665 46.9 6
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.
Voltage
Phase
Wires
HZ
Total
Wattage
Supply
Amps
Wire Size
Supply
Voltage
Phase
Wires
HZ
Total
Wattage
200 3360 27221 94.7 2
208 3360 29442 97.4 1
220 3360 32938 101.5 1
230 3360 36000 105.0 1
240 3360 39198 108.5 1
380 3360 30184 54.7 6
400 3360 33445 56.8 4
415 3360 36000 58.4 4
440 3360 32938 51.3 6
MKEL-60-T, MKEL-80-T, MKEL-100-T
480 3360 39198 54.8 6
Supply
Amps
Wire Size
WATER
Hot Water
H
3/4 NPT
Cold Water
C
3/4 NPT
CLEARANCE
Right - 0, Left - 0
Rear -
18" (457mm) Recommended
0 - Minimum
(NOT TO SCALE)
SECT. XI PAGE 6
Litho in USA
0609
Loading...