Cleveland KDM-40-T, KDM-60, KDM-60-T, KDM-80, KDM-25-T Specifications

Cleveland

™

P

roject ________________________________

I

tem __________________________________

Quantity _______________________________

FCSI Section ____________________________

A

pproval _______________________________

D

ate __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: [phone]

Fax: [phone]

Web Site: www.ClevelandRange.com

Email: [e-mail]

DIRECT STEAM KETTLES

CABINETIZED, DIRECT STEAM

POWER TILTING OR STATIONARY
2⁄3 STEAM JACKETED
25, 40 or 60 GALLONS (100, 150 or 225 LITERS)

Cleveland Standard Features

n Compact, Space Saving Modular Design

n T

ype 304 Stainless Steel with # 4 finish on Kettle and Cabinet

n Steam Control Kit includes:

Assembly, Condensate Strainer, Check Valve, all Factory
Assembled and Mounted

n Spring Assisted, Hinged, Domed Stainless Steel Cover

n 2" diameter Tangent Draw-Off Valve with Srainer

n Hot and Cold

n 25 psi Steam Jacket Rating and Safety Valve

n Kettle Drain Swing Funnel

n Typical approvals include NSF and ASME

FOR TILTING MODELS ONLY

n High Capacity Pouring Lip

n Permanently lubricated Power Tilt Mechanism

Water F

Steam Control Valve, Steam Trap

aucet with Swing Spout

MODELS: c KDM-25-T c KDM-25

c KDM-40-T c KDM-60
c KDM-60-T c KDM-80

Short Form Specifications

Options & Accessories

p Steam Pressure Reducing Valve where pressure exceeds 20

p Steam Supply Moisture Separator (MS)

p Type 316 Stainless Steel Kettle Liner for high acid food

p Cooking Baskets and Tri- Basket Supports (BS and TBS)

p Kettle Accessory Kit (KAK) includes:

p Lift-Off Co

p Measuring Strip (MS)

p Gallon Markings (KM)

p Hot and Cold or Cold Only K

V)

psi (PR

products (316-G)

p Clean-up Br

Whip (KW)

p 36˝ K
p Dr

or SKF-K)

ettle

w-off Br

a

ush (DB)

ers (CL)

v

ush (CB)

ettle Paddle (KP)

p 36˝ K

ush (KB)

ettle Br

p 36˝ K
p 24 oz.

ettle Filler with 60" hose (DKF-K

Ladle (KL)

Kettle Shall be CLEVELAND, Direct Steam Kettle, Cabinetized,
Model KDM - _____ - T (Power Tilt) or KDM- _____ (stationary);
_____Gallons. 2/3 Steam Jacketed, Type 304 Stainless Steel with
25 psi Steam Jacket Rating; Cabinet and frame to be Type 304
Stainless Steel; includes: Spring Assisted Domed Cover, 2"
Tangent Draw-Off Valve, Hot and Cold Water Faucet with Swing
Spout. To operate, connect directly to a steam source supplying
from 5 to 20 psi steam. Chromed Steam Condensate Trap and
Strainer factory assembled.

FOR TILTING MODELS ONLY

p Pan Carrier (PCK)

ter (FD)

er

w Div

p Flo

ainer (FS)

ood Str

p F

SECT. X PAGE 15

0707

CAPACITIES: (in 8 oz. servings,
other sizes may be calculated.)

25 Gallon / 100 liters . . . 400 servings
40 Gallon / 150 liters . . . 640 servings
60 Gallon / 225 liters . . . 960 servings

NOTES:

Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.

SECT

(NO

.

O SCALE)

T

T

GE

A

X P

16

0707

Litho in U.S.A.