Cleveland AFF-950-EC User Manual
Cleveland
™
P
roject ________________________________
I
tem __________________________________
Quantity _______________________________
FCSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
COOK CHILL SYSTEMS
C
ook/Chill Systems
CONVEYOR
FOR USE WITH CYCLE-MATIC VERTICAL
FORM-FILL-SEAL MACHINE
Cleveland Standard Features
n Electrically powered belt conveyor with quick discon-
nects for the Air and Electrical hookups for use with
the Cycle-Matic Form-Fill-Seal Machine
n Air operated raise and lower, loading end of conveyor
for various pouch lengths
n No additional Air or Electric required if used with
Cycle-Matic Form-Fill-Seal Machine
n All stainless steel construction
n Frame mounted on (4) 3" diameter lockable swivel
casters
n 18" wide USDA approved polypropylene belt with rub-
ber inserts
n 1/3 Horse power TEFC motor with drive gearbox
n Variable belt speed controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
n Conveyor can operate in either Constant Run or Timed
Run
n Operator start/stop controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
n Emergency stop at Cycle-Matic Form-Fill-Seal Machine
control panel
n Accepted for use in U.S.D.A. Inspected Facilities
MODEL:cAFF-950-EC
Short Form Specifications
Shall be CLEVELAND Model AFF-950-EC EXITING CONVEYOR
with; Air operated raise and lower, loading end of conveyor for
various bag lengths; All stainless steel construction; Frame
mounted on (4) 3" diameter lockable swivel casters; 18" wide
USDA approved polypropylene belt with rubber inserts; 1/3
Horse power TEFC motor with drive gearbox; Variable belt
speed and Operator start/stop controlled from Cycle-Matic
Form-Fill-Seal Machine touch screen; Conveyor can operate in
either Constant Run or Timed Run; Emergency stop at CycleMatic Form-Fill-Seal Machine control panel.
SECT. XIV PAGE 31
0707
32.5"
826mm
10.25"
260mm
28.00"
711mm
18.00"
457mm
PRODUCT
FROM
KETTLE
PRODUCT TO
AFF-950
3” ACME THREADED
CONNECTION
(optional)
5.31"
135mm
2” TRI-CLAMP
CONNECTION
1
9.00"
487mm
M
OTOR POWER
C
ABLE TO
AFF-950 CONTROL PANEL
NO EXTRA POWER
R
EQUIRED
MOTOR POWER
CABLE TO
AFF-950
CONTROL BOX
NO EXTRA AIR
REQUIRED
A
IR SUPPLY HOSE
T
O AFF-950
85 PSI MAX
AIR SUPPLIED FROM CYCLEMATIC
NO EXTRA AIR REQUIRED
8.25" MIN.
(210mm)
25.50" MAX.
(648 mm)
29.75"
(756 mm)
66.25"
1683mm
25.25"
641mm
13.25"
337mm
17.50"
438mm
33.75"
857mm
Cleveland Range reserves right of design improvement or modification, as warranted.
O SCALE)
T
(NOT
SECT. XIV PAGE 32
0707
Litho in USA
Loading...