Clemas & Co C50 43B Operator's Manual

C50 43B

SCRUBBER DRYER

OPERATOR MANUAL

Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury,

Gloucestershire, GL20 8NB.

Tel: [phone] Fax: [phone]

Email: [e-mail]

Web: www.clemas.co.uk

2

INTRODUCTION

INTRODUCTION 3
CONFORMITY DECLARATION 4
TECHNICAL DESCRIPTION 5
GENERAL INFORMATION 6

MANUFACTURER RESPONSABILITY 6
INTERVENT REQUEST 6

TRANSPORTATION 7

HANDLING OF PACKED MACHINE 7
UNPACKING THE MACHINE 7
HANDLING OF UNPACKED MACHINE 7

OPERATORING CONTROLS 8

DASHBOARD CONTROLS 8
DASHBOARD SYMBOLS 8

USE OF THE MACHINE 9

CHOOSING THE DETERGENT SOLUTION 9
SCRUBBING 9
WATER FILLING AND DISCHARGE, TANK CLEANING 10
SQUEEGEE ADJUSTMENT 10
BRUSHES REPLACEMENT 11

SAFETY, MAINTENACE AND INSPECTIONS 11

GENERAL SAFETY RULES 11
MAINTENANCE SCHEDULE 14
SQUEEGEE BLADES REPLACEMENT 14
VACUUM MOTOR MAINTENANCE 15
CONTROLS

16
SAFETY CONTROLS INSPECTION 16
ELECTRIC INSTALLATION INSPECTION 16

3

INTRODUCTION

AS SOON AS THE MACHINE ARRIVES PLEASE CHECK THAT
EVERYTHING IS OK,PLEASE CHECK THAT THERE IS NOT ANY DAMAGE
DUE TO TRANSPORT AND CHECK TO HAVE RECEIVED ALL THE
SHOWING ON THE DOCUMENTS.
IN CASE OF DAMAGES OR MISSING PART PLEASE ADVISE
IMMEDIATELY THE MANUFACTURER

INTRODUCTION

THIS KIND OF SCRUBBER MACHINE ALLOWS THE OPERATOR TO
CLEAN ALL KIND OF FLOOR AND ALL KIND OF DIRTY ,GIVING THE
BEST RESULT.
YOU CAN REACH BEST PERFORMANCES USING THE MACHINE IN A
PROPER WAYAND TAKING CARE OF IT.
PLEASE READ THIS MANUAL WITH ATTENTION.
USE THE MACHINE ONLY FOR CLEANING PURPOSE.

Keep this manual for all needs.

GOODS TO BE RETURNED

In case of goods to be returned for warranty replacement, it is necessary to have a written
acceptance from
FIORENTINI technical department before sending them.
All defective parts must be carefully packed in order to avoid further damages during transport.
Goods must be shipped ex-warehouse and followed by :

• serial number of the equipment where they were installed on;

• item code of the defective part;

• detailed description of the defect and of the condictions where it happened.

In case of defective electric or electronic goods,
please return them separately from other materials,
in order to help us in dividing dangerous wastegoods
and recicle the (RAEE) as DER 2002/96/CEE LOW.

CONFORMITY DECLARATION

Conformity declaration is consigned with the support and the manual of operating and maintenance
instructions.

4

5

TECNICAL DESCRIPTION

DE LUXE 43B DE LUXE 50B

DIMENSIONAL CHARACTERISTICS

LENGHT 1000 mm 1030 mm
WIDTH BRUSH COVER 480 mm 550 mm
HEIGHT 1060 mm
N° BRUSHES 1
BRUSH SIZE

∅430 mm ∅500 mm
PRESSURE BRUSH 30Kg
WORK WIDTH 430 mm 500 mm
SQUEEGEE WIDTH 700 mm
SOLUTION TANK IN POLYETHYLENE 45 liters
RECOVERY TANK IN POLYETHYLENE 45 liters
FRONT WHEEL DIAMETER 160 mm
REAR WHEEL DIAMETER 80 mm
TRACTION Electric
WEIGHT WITHOUT OPERATOR 135 Kg 140 Kg
WEIGHT WITHOUT BATTERY 80Kg 85Kg
BATTERY COMPARTMENT SIZE (l x w x h) 310x350x260

ELECTRIC CHARACTERISTICS

VOLTAGE 24 V
BRUSH GEARMOTOR 370W 17A
TRACTION MOTOR 110W 8A
VACUUM MOTOR 550W 22A

FUNCTIONAL CHARACTERISTICS

BRUSH LIFT CONTROL By pedal
SQUEEGEE LIFT CONTROL By pedal

PERFORMANCES

FORWARD RUNNING SPEED 0÷3,5km/h
MAX.SLOP 3%
HOUR SCRUBBING m²/h 1500mq/h 1750mq/h

ECOLOGIC CHARACTERISTICS

NOISE AT DRIVER’S EAR 72 decibel