cleer ALLY Quick Start Manual
1 - Ally overview
• 1.1 - Charging case and earbuds
Touch pad
Micro USB input Battery indicator
• 1.2 - Ear-tips and wing-tips
XS, S, M, and L Ear-tips
1, 2, 3 Wing-tips
and N insert without Wing-tip
2 - How to use
2.1
ON
Connection for the first time:
• Take out both earbuds from the
• Select Cleer ALLY on the Bluetooth
• Select “Pair” in the pop-up box after the
• Second earbud will pair automatically,
PAIRING CONNECTED
charging case
device list to pair the first earbud
automatically
first earbud paired
once completed - you can begin using
the earbuds.
Bluetooth Pairing Request
“Cleer ALLY” would like to pair
with your device.
Cancel
Pair
2.2
To pair manually, press the touch pad on either
earbud 3 times, on the third press hold for 2
+<2sx3
Note:
• If the earbuds are disconnected for over 10 minutes, the earbuds will power o.
• To power on the earbuds, please put them back to the charging case.
• To remove the paired record, put the earbuds back into the case, press the touch pad on each
earbud 2 times and hold for 1 second on the second press till the LED on the earbuds will flash
green, leave them charging case for 10 seconds to complete the process.
seconds.
Refer to step 2.1 to complete the pairing
sequence.
3 - Fit guide
1
Insert the left earbud into left ear and slightly
twist backward to secure.
2
4 - How to operate
Use case
Play / pause music
Answer call
Reject call
End call
Activate voice assitant
Cancel voice assitant
Status Action Behavior/indication
Music playback Play / pause music
Incoming call
Incoming call
During call
Any status except call
During
voice assitant
x2
x2
+<2s
x2
+<2s
x2
Bluetooth pairing
Pairing history
is empty
Any status except call
Automatically
x3
+<2s
When earbud is taken
out from the charging
case and the earbud
has not been paired
before, the earbud
should enter Bluetooth
pairing mode
automatically.
Hold third press for
2 seconds to enter
Bluetooth pairing
mode manually.
5 - LED behavior
• 5.1 - Earbud
Status
Power ON (Not connected)
Power ON (connected)
Pairing mode
Incoming call
Low battery
Charging
Charging complete
LED behaviors
5s
Blinking
Steady
• 5.2 - Charging case
Status
Battery level 76-100%
Battery level 50%-75%
Battery level 26%-49%
Battery level 1%-25%
LED behaviors
Loading...