FCC ID:2AETW-1283
FLOW
QUICK START GUIDE
FLOW
1
Power ON/OFF
>2.5s
ON
>7s
OFF
2
First time pairing
>5s
QUICK START GUIDE
Turn ON NF on
your device and
place it near the
right earcup.
Cleer FLOW
FLOW
3
NC ON/OFF
ON: single press
OFF: single press
4
Ambient Aware control
QUICK START GUIDE
Ambient Normal: single press
Ambient Voice: single press
FLOW
5
Connections
3.5mm Jack
Plug in 3.5mm audio jack for line
in or micro USB charging cable for
charging.
Micro USB
QUICK START GUIDE
0% 100%
Charging OFF
6
Touch control
Left earcup
2Hrs
FLOW
Volume up and down
Previous and Next track
7
Change rings
QUICK START GUIDE
1 3
2
Release Lock
Change
FLOW
8
LED behavior
Blinking Steady
QUICK START GUIDE
State
Bluetooth pairing
No device connected
Device connected
Low battery (<20%)
Charging
Charge complete
ANC ON
Ambient Normal
Ambient Voice
LED
behaviors
x2
OFF
FLOW
9
Specs
QUICK START GUIDE
• Driver Size: 40mm Ironless
• Frequency Response Range: 20-40KHz (Line in) /20-
TM
Driver
20KHz (Bluetooth)
• Connecting : 3.5mm for audio, Micro USB cable for
charging
• Support : BT 4.2, SPP v1.0, HFP v1.6, A2DP v1.3.1,
AVRCP v1.6
• Bluetooth transmitter frequency range : 2.402-
2.480GHz
• Bluetooth Transmitter Power: -6~+4dB
• Bluetooth Transmitter Modulation: GFSK, Π/4, DQPSK,
8-DPSK
• Battery: Rechargeable Lithium Ion rectangle cell (3.7V,
800mAh)
• Playback Time (ANC&BT): Up to 20 hours
FLOW
QUICK START GUIDE
Cleer Limited Warranty
(United States Only)
Cleer Limited warrants this product against defects in material
or workmanship for (1) year as set forth below when purchased
directly from Cleer Limited or a Cleer Limited retailer. Pursuant to
this Limited Warranty, Cleer Limited will, at its option, (i) repair the
product using new or refurbished parts or (ii) replace the product
with a new or refurbished product. For purposes of this Limited
Warranty, “refurbished” means a product or part that has been
returned to its original specifications. In the event of a defect,
these are your exclusive remedies.
Labor: For a period of (1) year from the original date of purchase
of the product (“Labor Warranty”), Cleer Limited will, at its option,
repair or replace with new or refurbished product, product
determined to be defective. If Cleer Limited elects to replace
the product after this Labor Warranty has expired but while the
parts warranty is still in eect, it will do so for the applicable labor
charge.
Parts: For a period of (1) year from the original date of purchase
of the product (“Parts Warranty”), Cleer Limited will supply new or
refurbished replacement parts in exchange for parts determined
to be defective.
This Limited Warranty covers only the hardware components
packaged with the Product. It does not cover technical assistance
for hardware or software usage and it does not cover any
software products whether or not contained in the Product; any
such software is provided “AS IS” unless expressly provided for
in any enclosed software Limited Warranty. Please refer to the
End User License Agreements included with the Product for your
rights and obligations with respect to the software.
Instructions: To obtain warranty service, you must deliver
the Product, freight prepaid, in either its original packaging
or packaging aording an equal degree of protection to the
original Cleer Limited retailer (point of purchase) or Cleer Limited
Customer Service. It is your responsibility to backup any data,
software or other materials you may have stored or preserved
on your unit. It is unlikely that such data, software or other
materials will be lost or reformatted during service and Cleer
Limited will not be responsible for any such damage or loss.
A dated purchase receipt from Cleer Limited or a Cleer Limited
FLOW
retailer is required. For specific instructions on how to obtain
warranty service for your product,
Visit the Cleer Limited website: www.cleer.us
Or call Cleer Limited Customer Service at:
1 888 672 5337 (67 CLEER)
For an accessory or part not available from your authorized
dealer call: 1 888 672 5337 (67 CLEER)
Following warranty service your original Product or a replacement
Product will be returned to you as your Product was configured
when originally purchased.
Repair / Replacement Warranty: This Limited Warranty shall
apply to any repair, replacement part or replacement product for
the remainder of the original Limited Warranty period or for (90)
days, whichever is longer. Any parts or product replaced under
this Limited Warranty will become property of Cleer Limited
This Limited Warranty shall not apply to: (a) consumable parts,
such as batteries that are designed to diminish over time, unless
failure has occurred due to a defect in materials or workmanship;
(b) cosmetic damage, including but not limited to scratches, dents
and broken plastic on ports; (c) defects caused by normal wear
and tear or otherwise due to the normal aging of the device; (d)
damage caused by accident, negligence, abuse, misuse, fire,
earthquakes, acts of God or damage resulting from liquid outside
of the approved levels; (e) damage caused by operating the device
outside Cleer Limited published guidelines; (f) damage caused
by service performed by anyone who is not a representative of
Cleer Limited or a Cleer Limited authorized service provider; (g)
Products whose seals are tampered; (h) Products whose serial
numbers have been removed or defaced from such Product;
(i) modifications, alterations or repairs to the Product made by
a party other than Cleer Limited or a party authorized by Cleer
Limited; (j) any failure by End User or a third party to comply with
environmental and storage requirements for the Product specified
by Cleer Limited, including, without limitation, temperature or
humidity ranges; or (k) use of the Product in combination with any
third-party devices or products that have not been provided or
recommended by Cleer Limited. This Limited Warranty is valid
only in the United States.
QUICK START GUIDE
FLOW
LIMITATION ON DAMAGES: CLEER LIMITED SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT.
DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED TO THE DURATION OF THIS
WARRANTY.
DISCLAIMER: THE LIMITED WARRANTY SET FORTH HEREIN
IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR
CONDITIONS RELATING TO THE PRODUCT, WHETHER EXPRESS
OR IMPLIED, AND CLEER LIMITED EXPRESSLY DISCLAIMS
ALL OTHER WARRANTIES AND CONDITIONS WHETHER
EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT,
FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES
ARISING OUT OF COURSE OF DEALING OR USAGE OF TRADE
AND AGAINST HIDDEN DEFECTS, TO THE FULLEST EXTENT
PERMITTED BY LAW. CLEER LIMITED DOES NOT WARRANT
THAT THE PRODUCT WILL MEET CUSTOMER’S REQUIREMENTS
OR THAT USE OF THE PRODUCT WILL BE UNINTERRUPTED OR
ERROR FREE. NO ADVICE OR INFORMATION, WHETHER ORAL
OR WRITTEN, OBTAINED FROM CLEER LIMITED OR ELSEWHERE
WILL CREATE ANY WARRANTY NOT EXPRESSLY STATED IN
THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental
or consequential damages, or allow limitation on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you. This Limited Warranty gives you specific legal
rights and you may have other rights which vary from state to
state.
QUICK START GUIDE
FLOW
QUICK START GUIDE
NOTICE
Recycling
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused. When you see the crossed
out wheel bin symbol attached to a product, it means the product is
covered by the European Directive 2002/96 EC:
Never dispose of your product with other household waste. Please
inform yourself about the local rules on the separate collection
of electrical and electronic products. The correct disposal of your old
product helps prevent potentially negative consequences on the
environment and human health. Your product contains batteries
covered by the European Directive 2006/66/EC, which cannot be
disposed of with normal household waste.
Compliance with FCC rules
1. This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure requirement.
The device can be used in portable exposure condition without RF restriction.
FLOW
FCC statements:
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to
this equipment. Such modifications or changes could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission Radiation Exposure Statement
Bluetooth wireless headphone(Model No:FLOW) has been
evaluated to meet general RF exposure requirement, Bluetooth
QUICK START GUIDE
wireless headphone(Model No:FLOW) can be used in portable
exposure condition without restriction
Register your product and get
support at www.cleer.us
©2017 Cleer Limited. All rights reserved
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Cleer Limited is under
license. Other trademarks and trade names are those of their respective
owners.
MADE IN CHINA
Loading...