Clearwater Enviro Technologies AG-150, AG-200, AG-300, AG-400 Installation & Operation Manual

Electronic Lime Scale Control System

for Agriculture Applications

AG-150, AG-200, AG-300 & AG-400

Installation & Operation Manual

AG-150 for pipe sizes

up to 1 ½" (non-ferrous)

AG-300 for pipe sizes

up to 3" (non-ferrous)

Electronic Lime Scale Control System

12/16

AG-200 for pipe sizes

up to 2" (non-ferrous)

AG-400 for pipe sizes

up to 4" (non-ferrous)

115/230 VAC (Auto Selected)

Electronic Lime Scale Control System

for Agriculture Applications

AG Commercial Units - 5 YEAR LIMITED WARRANTY

All ScaleBlaster AG commercial electronic descaler products carry a full five (5) year warranty to be free from defects in material
and workmanship under normal use from the date of purchase. In the event of malfunction or failure of this product, the purchaser should
contact their dealer for service. If distributor is unavailable, contact Clearwater Enviro Tech direct at 800-756-7946 or 727-562-5186 or
by fax [phone] or going to their website at clearwater-enviro.com to obtain an RMA (return merchandise number). Properly
package the entire unit and ship it prepaid with a note containing the RMA number, your name, address, phone number (or best way to
contact you) along with a brief description of the difficulty you are experiencing with the unit to:

®

Clearwater Enviro Technologies, Inc. • 8767 115th Ave. N. • Largo, FL 33773

Please be sure to also write the RMA number on the outside of the shipping box.

If the malfunction or failure is a result of defects covered by this warranty, Clearwater Enviro Tech will repair the product or replace it
and return it to the purchaser. After a period of five years, a small labor and parts charge will occur.

This warranty is limited to the original retail purchaser and is not transferable. This warranty does not cover damage due to accidents,
abuse, tampering, misuse, fire, lightning damage, power surge, flooding or any catastrophic acts of God.

This warranty does not extend to any other electrical or water appliance or device.

In no event shall the manufacturer be liable for damages from improper user installation, nor shall they be liable for already damaged
pipe and any consequential damages incurred, whether direct or indirect.

This warranty is limited to repair or replacement and does not include consequential damage or installation expenses and is in lieu of all
other warranties express or implied. This warranty gives you specific rights and you may also have other rights, which vary from state to
state.

Page 2

Table of Contents

Section Description Page

Product Warranty Information................................................................. 2

A) Identifying the Scaleblaster AG Components...................................... 3

B) Tools and Materials Required.................................................................. 3

C) Site Survey............................................................................................... 4, 5

D) Mounting the Power Box.........................................................................6

E) Installing the Signal Cable.......................................................................6, 7

F) Powering up the Control Box / Computer............................................... 8

G) LCD Indicator Screen..............................................................................8

®

®

A.) Identifying the ScaleBlaster AG Components

The ScaleBlaster AG unit includes the following components:

1) One ScaleBlaster AG control box.

2) One roll of 18 gauge (AG-150) or 12 gauge (AG-200, AG-300 &
AG-400) signal wire. (length to be determined by specific application,

pipe size, and pipe material.)

3) Long nylon cable ties, 5 or 3. (5 for the AG-150) or (3 for the AG-200,
AG-300 & AG-400) These ties aid in securing the cable to the pipe.

4) Warranty Card (along with this Installation & Operations Manual)

5) Shipping Box. Please save the foam inserts and shipping box, it is made

to protect the descaler during transport and is reusable in case the unit
ever needs servicing at the factory.

®

2

3

4

5 or 3

AG-100, AG-200, AG-300 or AG-400

1

5

B.) Tools and Materials Required

• Bullet Level

• Flat Screwdriver

• Screws & Anchors

• Voltage Meter

• Drill & Drill bits

• Phillips Screwdriver

• Utility Knife

• Wire Stripper

Page 3