Clear RF WRE2700 User Manual

Operator’s Manual and Installation Guide

Vehicle Installation Starter Kit

Wireless Network Range Extender

or the entire North American 850

has an automatic

a signal anomaly

an outdoor and an indoor antenna

maximum performance in very remote coverage areas.

requirements for the amplifier are positive 8.0 to 36.0 volts DC (negative ground) providing a very wide

systems found in automobiles, heavy trucks, boats and RVs.

, microprocessor controlled,

1900 MHz PCS frequency

oscillation control system that will automatically

is designed to operate as a

(direct connect)

The input power

™

WRE2700

Overview

The WRE2700
bidirectional RF amplifier f
bands. The amplifier
the gain and the output power if
wireless unit, with
included inductive coupler for

range of compatibility with power

gain and

is a high performance

MHz cellular and

occurs. The amplifier

, or as a tethered

:

adjust

unit with the

Rev C

1

Contents

................................

................................

................................

................................

Inductive Pickup Use and Installation

................................

SAR (Specific Absorption Rate) Explained

................................

How Your Clear RF™ Amplifier May Reduce SAR

................................

................................

................................

................................

................................

................................

................................

................................

............................

Error! Bookmark not defined.

................................

................................

................................

................................

................................

................................

................................

Bookmark not defined.

Error! Bookmark not defined.

Overview ................................

................................

....................... 1

Parts List ................................

Installation Guide

Diagnostic LED definitions

SAR Information

SAR Limits ................................

Radio Frequency Path Loss

Optional Accessories

Approved Antennas

WRE2700 Specifications

Warranty Information

................................

................................................................

................................................................

............................................................

................................................................

................................................................

................................

................................

................................

................................................................

................................................................

................................................. Error!

....................................................

........................ 3

.......... 4

5

............ 6

. 6

.................. 7

...................... 8

........................... 9

... 10

10

Rev C

2

Parts List

is part of a complete kit intended for use in an automobile, light truck, RV or any type of

heavy equipment or truck. Many optional antennas and accessories are also available to suite all types

of installation preferences and applications. This complete

1. WRE2700 Amplifier Unit

3. 12 volt CLA cable

5. Phone (Indoor) Antenna

2. 12 volt bare ended power cable

4. Network (Outdoor) Antenna

6. Phone (Indoor)

Inductive

Coupler

The WRE2700

kit includes the following:

Rev C

3

Installation Guide

: Installation of this

experience with installing electronic devices. We recommend seeking a

professional installer if you are not accustomed to installing electronics or high

Installation of this device is at your

assumes no responsibility for the installation or improper operation of this

Contact your dealer or

r assistance.

Unpack the shipping box and check the contents to make sure none of the components have

The antennas and amplifier should be temporarily setup to ensure optimal

system operation before permanently affixing the antennas. This is to prevent any problems

caused by poor antenna location that make cause an oscillation or feedback between the

ount the

position and the cable to the side where it may be concealed by the vehicle molding

Make sure the antenna is positioned so that it is at least

the closest human at any time

mount

driver and passengers. The antenna should be mounted near where the phone is

mally kept during driving, while using a hands free kit. If a cradle is used for the

phone, the antenna may be mounted directly on the cradle for maximum performance.

tape is acceptable to hold the antennas in place if needed. Make sure the

device requires knowledge of basic electrical and

own risk. Clear RF, LLC

with “Installation

in the vertical (Up/Down)

centimeters

in accordance with FCC Radio Frequency Exposure Limits

antenna behind the dash so that it is facing the

Disclaimer

tech devices.

device.
Help” in the subject line fo

[e-mail]

1.

any visual damage.

2. Installation Survey –

antennas.

a. Temporarily m

b. Temporarily

nor

Household

Rev C

“Outdoor” or Network antenna

the Phone “Indoor”

20

.

(8 inches) from

.

4