Page 1
Page 2
Page 3
Product View
LED Indication
LED
Indication
Instructions
Blue
Key is locked
Green
Key is unlocked
Blink Once
Entering User PIN
Blink
Transferring Data
Blue
User PIN Accepted
Blink
Lock LED
Keypad
Unlock LED
KEY Button
Power Button
Page 4
Specifications
Product
ClearCrypt USB3.0 Secure Flash Drive
Material
High quality Aluminum material
Mode
ClearCrypt
Features
Tough design - dust and water resistant
Secure PIN Access with keypad
Real-time 256-bit AES Hardware Encryption
Software Free Design
Wear Resistant Keypad
Drive Reset Feature
Comments
Encryption: AES Cypher-Block Chained mode
Encryption Keys: 256-bit Hardware
Hashing: 256-bit SHA
OS
Requirement
Windows 2000 / XP / Vista / Win7/Win8
Mac OS 10.2 or higher
Linux 2.4.2 or higher（such as Ubuntu, Android…）
Environment
Operating Temperature: 5°C ~ 40°C
Operating Humidity: 20%RH ~ 80%RH
Storage Temperature: -20°C ~ 70°C
Storage Humidity: 10%RH ~ 90%RH
Capacity
8GB/16GB/32GB/64GB
Interface
USB3.0
Power Supply
USB Bus Power 5V/900mA
Size
9.1cm x 2.4cm x 1.0cm
Page 5
Battery
ClearCrypt Secure flash has an integrated Li-ion battery.
Function
Instructions
Power key
Press once to Power ON Press again to Power
OFF
Charge method
By connecting to powered USB
Battery Charge
Approximately 4 hours for full charge from flat.
Energy mode
Flash will automatically lock and turn off once
disconnected after one minute.
Page 6
Unlock the ClearCrypt key：
Step
Indication
1. Press Power key to enable Battery
mode or connect the key into a computer
will be on Blue
2. Press the Key button
3. Accepting user PIN
(The default Admin PIN is 111111)
will be on Blue and
will blink Green
4. Input User PIN
will blink Blue
5. Press the Key button
OFF
will blink Green 1
time
6. Once the correct PIN is accepted the
ClearCrypt Flash will be unlocked
OFF
will be on Green
Lock the ClearCrypt key：
Step
Indication
When in unlock mode, Press the key
button to lock the ClearCrypt
will be on Blue
OFF
Page 7
Format ClearCrypt Secure Flash
After you have created a new PIN you will need to format the device.
1. Right-click “My Computer” and then click Manage from the Windows
desktop.
2. In the Computer Manage window, click Disk Management.
3. Right-click Removable Raw drive, in the blank area under the unallocated
section, and then select Format.
4. The Format window opens and Select FAT32 of NFTS depending on your
requirements and click OK
Page 8
Change PIN Code
To create your new PIN be sure to follow the instructions below:
Please Note: A PIN can be from 6-32 digits long.
ClearCrypt Secure Flash can have an admin PIN and a user PIN.
1. Admin-PIN- Supports read & write
Default PIN: 111111.
2. User-PIN- Supports read only.
Default PIN: 222222.
Note: If a mistake is made when inputting the PIN, please repeat the PIN
Change process.
Page 9
Step
Indication
1. Press Power key to enable Battery
mode or connect the key into the
computer
will be off and
will be on Blue
2. Double press the Key button
will be on Blue and
will blink Green
3. Input the old Admin PIN
will blink Blue
4. Press the Key button to confirm
will blink Green
5. Input the new Admin PIN (6-32
numbers long)
will blink Blue
will blink Green
6. Press the Key button to confirm
the new Admin PIN
will blink Green
7. Input the new Admin PIN again
will blink Blue
will blink Green
8. Press the Key button to
complete the Admin PIN
OFF
will be on Green
9. To Create User PIN input the User new
PIN (Read Only User)
will blink Blue
will blink Green
10. Press the Key button to
confirm the new User PIN
will blink Green
11. Input the new User PIN again
will blink Blue
will blink Green
12. Press the Key button to
complete the User PIN
OFF
will be on Green
Page 10
Reset the ClearCrypt Flash
If you forget your PIN or if you would like to delete all data stored on the
ClearCrypt Flash and create a new PIN please follow the instruction below.
Please Note: The reset process will remove your PIN and remove all data.
Please backup your data before you proceed. A new user PIN will have to
be created in order to re-enable the flash. The ClearCrypt Flash will also
have to be reformatted.
Step
Indication
1. Press Power key (Battery mode)
or connect the key into the computer
will be on Blue
2. Press and hold the Key button
And press the number 9 button for 10
seconds
OFF
will blink Green
3. Press the number 0 button to reset the
ClearCrypt key. Note: PIN codes will
change back to default.
(Admin default PIN is 111111)
(User default PIN is 222222)
& will blink
together for 1 second
and will then turn off.
4. Unplug the key, and re-connect the key
into the computer. Repeat Change PIN
process to reset your personal PIN.
WARNING: In any case the wrong PIN code is entered 5 times in a row
all data will be erased. Please do not forget your PIN code.
Page 11
FAQs
Q: If the PIN is forgotten, what happens to the data on the ClearCrypt
Secure Flash?
A: If you forget the PIN, there is no way of gaining access to the data stored
on the device.
You must completely reset the CLEARCRYPT device.
When reset all data stored on the device will be erased.
When the CLEARCRYPT is reset the following occurs:
All the data on the device is erased.
The CLEARCRYPT device will need to be initialized and formatted.
A new Admin & User PIN will need to be set.
Q: If battery is depleted, how can I unlock the Secure Flash?
A: If battery is depleted, you can connect the flash to a powered USB. The
flash will charge automatically and the battery will take approximately 4
hours to fully charge, you can also access the device by unlocking it while it
is connected to a computer.
Q: What file system should I choose to format my ClearCrypt key?
This will depend on how you want to use the drive but in general, we
recommend following:
EXFAT for Linux
NTFS for Windows XP, Windows Vista, Windows 7
HFS+ (Mac OS Extended) for Mac OS X
FAT32 to use it across different platforms like Windows,
Mac and Linux (single file size for FAT32 is limited to 4GB)
Page 12
Loading...