CLEARAUDIO Statement V2 Black Lacquer, Statement V2 Black/Transparent, Statement V2 Wood/Black, Statement V2 Wood CA_Statement_E.pdf

Download

Page 1

Statement V2

User manual

Page 2

User manual

Dear Clearaudio customer, Congratulations on your purchase of the You have purchased a state-of-the-art turntable, the

Statement V2

turntable.

, a world class product from

Clearaudio electronic GmbH.

The special resonance-optimised construction, the external motor-unit and the patented Clearaudio -

CMB

-bearing-technology guarantees absolute speed stability, pure pleasure in

listening and reproduction absolutely faithful to the original.

Thank you very much your condence.

Please read this user manual carefully to ensure that your

Statement V2

turntable is correctly

installed ready to take you to a new dimension of music reproduction. We hope you will enjoy your new Clearaudio

Statement V2

turntable.

Clearaudio electronic GmbH

Please read the warning before connecting your

Statement V2

turntable to the mains supply.

WARNINGS

Don’t expose your turntable to rain or humidity. Don’t handle the mains leads with wet hands. Don’t place or insert anything into the equipment or through ventilation holes.

No naked ame sources, such as lighted candles, should be placed on the equipment.

CE-MARKING

The Clearaudio disturbance (EMC) and low-voltage appliances.

Statement V2

meets the regulations concerning electromagnetic

Recording und reproduction of any sound-material may require the consent of the creator. Please acknowledge the information given in the

- Copyright Act 1956,

- Dramatic and Musical Performers Act 1958,

- Performers Protection Acts 1963 and 1972,

- Any more recent legal regulations.

2 © clearaudio electronic GmbH, 2018/05

Page 3

User manual

Contents

1. Packaging overview ............................................ 4 - 5

2. Construction overview ........................................ 6

3. Setup and operation ............................................ 7 - 15

4. Motor adjustment ................................................ 16

5. Special notes ....................................................... 17

6. Technical data ..................................................... 18

Warranty information ............................................. 19 - 20

Made in Germany 3

Page 4

User manual

1. Packaging overview

The

Statement V2

pallets. The Packing is specially made for the repacking.

Please note:

The

Statement V2

Attention / Warning:

IMPORTANT!

Before it is fully assembled there are strong magnetic elds around the main bearing,

these could interfere with heart pacemakers and so the Statement V2 should not be setup by anyone with a pacemaker.The should not be assembled by anyone with back problems.

The two wooden boxes contain the turntable stand and the pendulum weights, as well as ve (5)

separately packed cartons containing all other parts (e.g. massive metal cross, acrylic chassis, bearings etc).

turntable is packed and delivered on either a Euro pallet or two half size Euro

Statement V2

turntable is very heavy and will require at least two people to unpack and setup.

Statement V2

turntable and should be retained for any

turntable is extremely heavy and

Please check the accessories contents according to the following list before you setup the turntable.

432

1. Two pairs of white gloves 5. Three bases as counter weights (40mm)

2. Two belts 6. Four bases as at pads

3. Tool for adjustment of stainless steel

discs (pendulum weight)

4. Three bases as counter weights (20mm) 8. A set of hex wrenches

4 © clearaudio electronic GmbH, 2018/05

7. Polishing paste

Page 5

User manual

11109

1312

9. Bearing oil 13. Bubble level gauges

10. Acrylic cleaner 14. Not shown: Two wooden blocks

11. Screwdriver 15. Not shown: User manual

12. Statement clamp 16. Not shown: Warranty card, Clearaudio

certicate card (QCQ)

Made in Germany 5

Page 6

User manual

2. Construction overview

Pic. 1: Construction overview

6 © clearaudio electronic GmbH, 2018/05

Page 7

User manual

3. Set up and operation

Select the position in which you will uste the turntable. Place the position on the four supplied feet.

Statement V2

turntable base in this

Statement V2

Pic. 2: Placing the

Statement

Place the two wooden blocks beneath the base as shown.

Statement V2

Pic. 3: Placing the

Made in Germany 7

Statement

Page 8

User manual

IMPORTANT!

Being careful not to damage the bearing spindle on top of the pendulum shaft, assemble the pendulum, starting by sliding a solid metal disc over the pendulum shaft so that it rests on the wooden blocks. Be sure to place a felt mat between each metal disc, building the pendulum with

three solid discs at the bottom, then six half-cut-away discs, then two more solid discs, nally adding

the solid disc engraved with the words Clearaudio

Disc engraved with

„Clearaudio

Disc, half cut away

Statement

Disc, solid

(2 pcs.)

(6 pcs.)

“

Statement V2.

Disc, solid

(3 pcs.)

Pic. 4: Placing the discs

Please note:

If you are using the

Statement V2 TT1

tangential tonearm, position the half-cut- awa y discs with the

cut-away section at the rear of the turntable.

Place the four cork damping plates on top of the four corner pillars.

Place 4 pcs. damping

plates if not assembled

already from the factory

Place a felt mat in

between each stainless

steel platters

Please note:

Again, being careful not to damage the bearing spindle on top of the pendulum shaft, lower the stainless steel cross frame over the pendulum shaft so that is rests on the four cork damping plates.

Pic. 5: Placing the cork damping plates

8 © clearaudio electronic GmbH, 2018/05

Page 9

User manual

Set the cross shaped massive metal part through the spindle onto the four cork.

Pic. 6: Placing the metal part

Pic. 6.1: Placing the metal part

Tighten the bearing to the shaft by tightening the screws in the bearing collar (8x).

Pic. 7: Tighten the bearing

Made in Germany 9

Page 10

User manual

Lift the pendulum shaft to align the V-shaped groove in the pendulum shaft with the locking screws in the gimbal bearing. Lock the gimbal bearing to the pendulum shaft by fully tightening the eight screws so that they locate in the groove of the pendulum shaft.

IMPORTANT!

Carefully lift the whole upper section, raising the

pendulum o of the wooden blocks.

Remove the wooden blocks from beneath the turntable and carefully lower the upper section back onto the four cork damping plates.

Pic. 8: Lifting the upper part

Pic. 9: Removing the wood spacers

10 © clearaudio electronic GmbH, 2018/05

Page 11

User manual

Lock the oating chassis to the pendulum shaft by fully tightening the eight screws.

IMPORTANT!

Being careful not to damage the bearing spindle on top of the pendulum shaft, lower the main

oating chassis over the top of the pendulum

shaft.

10.

Apply 3 to 4 drops of the Clearaudio Art. No. AC068) to the bearing spindle.

Please apply 3 to 4 drps

to the bearing spindle

Pic. 11: Tighten the bearing screws

Pic. 10 : Removing the wood spacers

Synthetic Bearing Oil

(also available at www.analogshop.de

Lock the 8 screws

Made in Germany 11

Page 12

User manual

11.

Place the lower drive bearing housing over the bearing spindle.

12.

Place the lower magnetic drive platter over the bearing housing making sure that the ring of magnets faces upwards.

Pic. 12: Placing the lower bearing house

Pic. 13: Placing the lower magnetic

drive platter

13.

For the next step, please apply 3 to 4 drops of the main bearing spindle.

the Clearaudio

Synthetic Bearing Oil

also onto

Acrylic chassis

Pic. 14: Oiling the main bearing spindle

12 © clearaudio electronic GmbH, 2018/05

Page 13

User manual

14.

Making sure that the circular cut-outs in the corners of the acrylic chassis are on the underside.

Carefully (!) insert the bearing spindle into the bearing sleeve in the acrylic chassis.

IMPORTANT!

Be careful not to allow the magnets to snatch the bearing as you insert it.

Pic. 15: To insert the bearing spindle into the bearing sleeve

15.

Attach the upper drive platter to the bottom of the main bearing spindle by screwing the bot tom cap very tightly to the bottom of the main bearing. Make sure that the ring of magnets faces down.

IMPORTANT!

Gently push the upper magnetic drive platter upwards against the acrylic chassis to ensure that the platter fully sits in the bearing.

Pic. 16: To attach the upper drive platter to the bottom of the main bearing spindle

Made in Germany 13

Page 14

User manual

16.

Lower the acrylic chassis onto the four pillars at the

corners of the oating chassis so that the circular

cut-outs sit over the pillars.

Pic. 17: To lower the acrylic chassis

17.

Firmly screw the four stainless steel arm bases through the acrylic chassis into the four pillars of the

oating chassis.

Pic. 18: Setting the arm bases

14 © clearaudio electronic GmbH, 2018/05

Page 15

User manual

18.

Lower rst the metal ywheel over the main bearing.

In the next step lower the main platter on top of the metal

ywheel, making sure that the dot on the top of the bearing

and the platter are aligned.

Pic. 19: Setting the platters

Pic. 20: Finished set up

Made in Germany 15

Page 16

User manual

4. Motor adjustment

Push the motor pulley over the motor spindle and lock in place by gently tightening the three screws in the side of the pulley. (If not already factory adjusted)

Place the drive belt rst around the lower drive platter and

then around the motor pulley.

Pic. 21: Setting the motor pulley

Back view

Pic. 22: Placing the drive belt

Plug the supplied

Statement V2

power supply rst into the back of the motor, and nally into the

mains supply.

To assembly the tonearm please refer to the instruction manual of the manufacturer.

The setup of your

Clearaudio wish you al lot of pleasure and musical enjoyment with your

Statement V2

turntable is now complete!

Statement V2.

16 © clearaudio electronic GmbH, 2018/05

Page 17

User manual

5. Special notes

5.1 Maintenance The Clearaudio

• If the mains supply.

• Every two years you can lubricate (only if you notice speed variation) the bearing of the turntable platter with the supplied oil. In this case it is only necessary to put 4 or 5 drops of the oil onto the bearing shaft.

• Please take special care to avoid any damage to the power cord. Any damage should only be repaired only by authorized personal. A damaged power cord must be exchanged immediately!

Caution!

Don’t use abrasive cleaning uid for the cleaner in a glass of water is sucient. Carefully dry all cleaned parts with a cotton

lint-free cloth.

The acrylic parts must only be cleaned with special acrylic cleaning uids and under no circumstances spirit or uids based on alcohol. (To avoid the danger of surface

damage!) You will nd suitable cleaning uids either in specialised shops or in the Clearaudio onlineshop: www.analogshop.de .

Statement V2

turntable is not in use for a long time please disconnect the motor from the

does not require any extensive maintenance.

Statement V2

turntable. A few drops of window

5.2 Transportation

Should it be necessary to transport the the turntable platter. Otherwise serious damage can occur! It is also important that the bearing hole is covered to avoid any dust entering the bearing.

Always take of the pulley o of the motor unit to prevent the motor shaft from any damage.

To achieve the full Clearaudio warranty, you are required to ll out and return the corresponding part of the warranty registration certicate /card to Clearaudio within two weeks after purchase.

Only if the product is returned in its original packing can Clearaudio provide service under warranty.

5.3 Service

If service or repair on any Clearaudio product is necessary, please contact your dealer / distributor or contact Clearaudio directly. Clearaudio can also inform you of your nearest service location.

PLEASE RETAIN ALL ORIGINAL PACKAGING. Y ou will need it if this unit has to be transported and / or shipped. Any further questions you may hav e about this turntable should be directed to the distributor or directly to Clearaudio at:

Clearaudio electronic GmbH

Statement V2

Spardorfer Str. 150

91054 Erlangen

Germany

Phone: +49 9131 40300100

Fax: +49 9131 40300119

turntable, always please be sure to remove

www.clearaudio.de

www.analogshop.de

info@clearaudio.de

Made in Germany 17

Page 18

User manual

6. Technical Data

Construction details: Aluminium, stainless steel and bullet proof wood Speed change: Electonic speed selection, 33 1/3 rpm, 45 rpm, 78 rpm Motor drive: Non-contact magnetic drive system Bearing: Clearaudio patented ceramic bearing (CMB) Platter: 98mm / 3.86 inches main platter (Acryl / POM), dynamically

balanced, with excellent speed stability

Speedaccuracy (measured): < ±0.03% Power consumption: Max. consumption: 19 watts

Consumption in operation: 8 watts

O mode: 0.0 watts (if main switch is in '0' position)

Total weight: approx. 350kg Dimensions (W/D/H in inch): approx. 27.17 x 22.44 x 52.17 (with TT1 tonearm) inches

Dimensions (W/D/H in mm): approx. 690 x 570 x 1325 (with TT1 tonearm) Manufacturers guarantee*: 10 years*

* Provided that the warranty card is correctly completed and returned to Clearaudio within 14 days of purchase.

Clearaudio electronic is not responsible for typographical errors in descriptions.

Technical specications subject to change or improvement without prior notice.

Product availability is as long as stock lasts. Copies and reprints of this documents, including extracts, require written consent from

Clearaudio electronic GmbH; Germany

Page 19

User manual

The warranty time for the

Statement V2

turntable is 10 years. To achieve the full Clearaudio warranty of 10 years, it is necessary that you ll out and send the corresponding part of the warranty registration certicate /card back to Clearaudio, within two weeks after purchase. Only if the product is returned in its original packing Clearaudio can provide the warranty of 10 years.

ENGLISH

WARRANTY For warranty information, contact your local Clearaudio distributor. RETAIN YOUR PURCHASE RECEIPT

Your purchase r eceipt is your permanent record of a valuable purchase. It should be kept in a safe place to be r eferred to as necessary for insurance purposes or when corresponding with Clearaudio.

IMPORTANT

When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. Your purchase receipt or invoice is adequate for such proof. FOR U.K. ONLY

This undertaking is in addition to a consumer‘s statutory rights and does not aect those rights in any way.

FRANÇAIS

GARANTIE Pour des informations sur la garantie, contacter le distributeur local Clearaudio. CONSERVER L‘ATTESTATION D‘ACHAT

L‘attestation d‘achat est la preuve permanente d‘un achat de valeur. La conserver en lieu sur pour s‘y reporter aux ns

d‘obtention d‘une couverture d‘assurance ou dansle cadre de correspondances avec Clearaudio. IMPORTANT

Pour l‘obtention d‘un service couvert par la garantie, il incombe au client d‘établir la preuv e de l‘achat et d‘en corroborer

la date. Le reçu ou la facture constituent des preuves susantes.

DEUTSCH

GARANTIE

Bei Garantiefragen wenden Sie sich bitte zunächst an Ihren Clearaudio Händler. Heben Sie Ihren Kaufbeleg gut auf. WICHTIG!

Die Angaben auf Ihrer Quittung erlauben uns die Identizierung Ihres Gerätes und belegen mit dem Kaufdatum die Dauer Ihrer Garantie-Ansprüche. Für Serviceleistungen benötigen wir stets die Gerätenummer. Diese nden Sie auf dem

Typenschild auf der Rückseite des Gerätes oder auch in der beigefügten Garantie-Registrierkarte.

NEDERLANDS GARANTIE Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Clearaudio.

UW KWITANTIE, KASSABON E.D. BEWAREN

Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een waardevol artikel en dienen op een veilige plaats bewaard te worden voor evt, verwijzing bijv, in verbend met verzekering of bij correspondentie met Clearaudio.

BELANGRIJK

Bij een evt, beroep op de garantie is het de verantwoordelijkheid v an de consument een gedateerd bewijs v an aankoop te tonen. Uw kassabon of factuurzijn voldoende bewijs.

Made in Germany 19

Page 20

User manual

ITALIANO

GARANZIA

L’apparecchio è coperto da una garanzia di buon funzionamento della durata di un anno, o del periodo previsto dalla legge, a partire dalla data di acquisto comprovata da un documento attestante il nominativ o del Rivenditore e la data di vendita. La garanzia sarà prestata con la sostituzione o la riparazione gratuita delle parti difettose.Non sono coperti da garanzia difetti deriv anti da uso impr oprio, err ata installazione, manuten-

zione eettuata da personale non autorizzato o, comunque, da circostanze che non possano riferirsi a difetti

di funzionamento dell’apparecchio. Sono inoltre esclusi dalla garanzia gli interventi inerenti l’installazione e l’allacciamento agli impianti di alimentazione. Gli apparecchi verranno riparati presso i nostri Centri di Assistenza A utorizzati. Le spese ed i rischi di trasporto sono a carico del cliente. La casa costruttrice declina ogni responsabilità per danni diretti o indiretti pro vocati dalla inosservanza delle prescrizio-ni di installazione, uso e manutenzione dettagliate nel presente manuale o

per guasti dovuti ad uso continuato a ni professionali.

ESPAÑOL

GARANTIA Para obtener información acerca de la garantia póngase en contacto con su distribuidor Clearaudio. GUARDE SU RECIBO DE COMPRA

Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como referencia cuando tenga que hacer uso del seguro o se ponga en contacto con Clearaudio.

IMPORTANTE

Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuándo efectuó la compra. En este caso, su recibo de compra será la prueba apropiada.

Page 21