CLEARAUDIO Performance DC Clarify Package (Black/Silver), Performance DC Wood Black/Dark Wood, Performance DC MС Satisfy Package Black/Silver, Performance DC Wood Gold/Dark Wood, Performance DC MС Satisfy Package Silver/Black Clearaudio Performance DC.pdf
...
Performance DC
User manual
Black with black chassis
Black with silver chassis
Silver with black chassisSilver with silver chassis
Silver with wood chassis
© clearaudio electronic GmbH, 2019/01 Made in Germany
Black with wood chassis
User manual
Dear Clearaudio customer,
You have purchased a State-Of-The-Art turntable, the
Performance DC
, a world class product of
Clearaudio electronic GmbH. Congratulations on your purchase!
The main chassis consists of a complex sandwich of materials: aluminium and HDF material.
The powerful and smooth-running DC motor is integrated within and is eectively decoupled by the
main chassis.
The motor is hidden beneath the platter and drives the precision machined aluminium sub-platter
via a precision machined POM main platter are supported by Clearaudio‘s patented
CMB Ceramic
Magnetic Bearing.
The drive system is operated by four blue illuminated buttons, ergonomically integrated into the
front left of the chassis. Almost any commercially available 9 inch tonearm can be tted by virtue of
the easily interchangeable armboards.
Please read this user manual carefully so that you can enjoy all the adv antages of your
DC
turntable. All information given will help to generate the best performance and av oid any possible
damages.
We hope you will enjoy your new Clearaudio
Performance DC
turntable.
Clearaudio electronic GmbH
Performance
Please read the warnings before connecting your Performance DC turntable to the mains supply.
WARNINGS
Don’t expose your turntable to rain or humidity.
Don’t handle the mains leads with wet hands.
Don’t place or insert anything into the equipment or through ventilation holes.
No naked ame sources, such as lighted candles, should be placed on the equipment.
CE-MARKING
The Clearaudio
(EMC) and low-voltage appliances.
Performance DC
meets the regulations concerning electromagnetic disturbance
2 © clearaudio electronic GmbH, 2019/01
User manual
Contents
1. Packaging overview ............................................. 4
2. Setup and operation ............................................. 5
3. Special notes ........................................................ 12
4. Technical data ...................................................... 13
Warranty information ............................................... 14
Made in Germany 3
User manual
1. Packaging overview
The Clearaudio
Please check the contents according to the following list before you set up your new Clearaudio
Performance DC
1. Layer (top):
Top of bearing, belt, ttings and
accessories (Quality and warranty
card, bearing oil, hex keys, grounding
wire)
sub-platter, power supply
If ordered as set:
Tonearm and/or pickup
Performance DC
turntable.
turntable is delivered in specially designed custom packaging.
2. Layer (middle):
Turntable chassis
3. Layer (bottom):
Platter
Pic. 1: Packaging overview
IMPORTANT NOTICE: Please double check the tightness of all bolts and armboard mounting
hardware, as temperature uctuations during transit may have caused the hardware to become
loose.
4 © clearaudio electronic GmbH, 2019/01
User manual
2. Setup and operation
The
Performance DC
(Packaging overview).
The setup is easy , as some of the components are pre-assembled at the f actory. Please make use of
the white gloves enclosed in order to avoid scratches or unwanted ngerprints (e.g. on the platter).
Please follow the instructions step by step:
The
Performance DC
turntable consists of several components, as described in No 1
requires a space of at least 16.54 x 12.99 inches for positioning.
16.54 inch
/ 420 mm
Pic. 2: Setting up space
12.99 inch / 330 mm
Made in Germany 5
User manual
2.1
Place the pre-mounted chassis on your hi-rack or another suitable surface.
Pic. 3:
Performance DC
chassis
2.2
To avoid hum noises we recommend to ground the bearing. For that attach the supplied grounding
wire to the the existing screw on the bottom side of the chassis (#2.5).
Pic. 4: Grounding the bearing of the
Performance DC
2.3
Please remove the protective seal from the bearing shaft and place two drops of the synthetic
bearing oil on the ceramic bearing shaft. Slip the bearing top onto the bearing shaft of the turntable
(also available through www.analogshop.de Art. No. AC068).
Pic. 5: Bearing oil
6 © clearaudio electronic GmbH, 2019/01
User manual
2.4
Now you can set the bearing upper part carefully onto the bearing. To avoid damages make sure
you slide the bearing upper part slowly and carefully on the polished ceramic shaft.
Pic. 6: Fitting the bearing upper part
2.5
Now you can set the sub-platter carefully onto the bearing (see Pic. 7).
To avoid any damage, make sure you slide the sub-platter slowly and carefully onto the bearing.
After that, take the included belt and place it around the motor and the sub-platter (see Pic. 7.1).
At this point the sub-platter will be higher than the pulley. This is normal, as the CMB requires the
weight of the platter to fully engage it.
Pic. 7: Setting the sub-platter Pic. 7.1: Placing the belt
Made in Germany 7
User manual
2.6
Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the
platter slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the
platter does not slip or fall on your turntable.
Pic. 8: Setting the platter onto the bearing
2.7
Please check with the bubble level gauge, if your
DC
turntable is in a level position.
Performance
Y ou can adjust each of the turntable’s feet to get the turntable
level. Only if the turntable is in a level position you will get the
best results with your turntable.
Please note:
Through turning the feets clockwise you will raise the turntable,
by turning counter clockwise the turntable will lower.
Pic. 9: Adjustment of the level position
Pic. 9.1: Adjustment of the height
8 © clearaudio electronic GmbH, 2019/01
User manual
2.8
If the
Performance DC
turntable was purchased as a package together with the
please follow the below described installation of the tonearm.
Position of the screw
to fasten the
tonearm with 2mm
allen key
Boring for the
tonearm
feet
Pic. 10: Rear view
Clarify
tonearm
Clarify
tonearm,
1. Insert carefully rst the cable and then the tonearm feet through the hole of the tonearm base.
2. Now adjust the tonearm height.
3. At the end secure the tonearm with the screws with are already integrated at the front of the
mounting base.
4. For tonearm and cartridge mounting please refer to the user manual of the respective
manufacturer.
Made in Germany 9
User manual
If you purchased the Clearaudio
received also a Smart Stlyus Gauge as accessories, which allows you to adjust the tracking force of
the cartridge.
This position of the diamond
correlates to a tracking force of
20mN (2.0g).
Performance DC
as package with tonearm and cartridge, you
tracking force too high!
tracking force too low!
✓
Pic. 11: Use of the Smart Stylus Gauge
10 © clearaudio electronic GmbH, 2019/01
User manual
Now you can connect the
Pic. 12: Connection to the main supply
Performance DC
turntable with the main supply.
2.9 Speed ne adjustment
As the motor adjustment is already pre-set at the factory, you don’t have to check the speed before
using the turntable for the rst time.
If you want to check the speed of your turntable by yourself over the time, we recommend to use a
Stroboscope Testrecord. To adjust the speed so perfectly and precisely as possible, we recommend
the Clearaudio Stroboscope Testrecord (Art. No. AC038) and the Clearaudio “Speed Light”
(Art. No. AC039, both available at www.analogshop.de).
On the backside (close to the power supply input) of your turntable there are three setting trimmers:
- Left trimmer = setting 78rpm
(near power supply jack)
- Middle trimmer = setting 45rpm
- Right trimmer = setting 33 1/3rpm
Pic. 13: Speed ne adjustment
Urgent:
Don’t use a metal screw driver. Only use screw driver made out of synthetic or ceramic material, to
avoid circuit damage.
Now you are nally ready to play your vinyl records!
Attention:
If the turntable is not in use, disconnect the unit completely from the power supply by removing the
main plug from the socket.
We wish you a lot of pleasure with your new
Made in Germany 11
Performance DC
turntable.
User manual
3. Special notes
3.1 Maintenance
• If the
the main supply.
• Every two years you can lubricate the bearing of the turntable platter with the delivered oil. In
this case it is enough to put 1 or 2 drops of the oil into bearing.
• Please take special caution to any damages of the power cord. Any damages should be repaired
only by authorized personal. A damaged power cord must be exchanged immediately!
Caution!
Please use only non alcoholic uids and only uids specially used for acrylic, to clean the
Performance DC
Otherwise damage on the material or the surface can occur!
Don’t use try cloths for cleaning because of the electrostatic charging. Suitable cleaning
uids will be available at Clearaudio (www.analogshop.de) or your Hi dealer.
Performance DC
turntable.
turntable is a longer time not in use, please disconnect the motor from
3.2 Transportation
Send / ship the
Only in the original packing Clearaudio can provide the warranty.
If you repackage the turntable, please make all steps inverted like at installation and setup (chapter
2).
• If any transportation of the
the turntable platter and the shaft holder. Otherwise serious damage can occur!
• To avoid any dust coming into the bearing, the bearing hole needs to be covered as well.
3.3 Service
• In case of any necessary, service for all Clearaudio products should be done by authorized
personal only.
• In case of any repair, the Clearaudio
nearest authorized Clearaudio distributor, dealer or directly to the Clearaudio factory.
Performance DC
Performance DC
turntable always and only in the original packing!!!
turntable should be necessary , please always remove
Performance DC
Clearaudio electronic GmbH
Spardorfer Str. 150
91054 Erlangen
Germany
turntable needs to be send to your
Phone.: +49 9131 40300 100
Fax: +49 9131 40300 119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
12 © clearaudio electronic GmbH, 2019/01
User manual
4. Technical Data
Construction details: Resonance-optimised turntable, highly compressed wood
chassis in sandwich construction embedded between two
aluminium plates
Speed change: Comfortable speed change, 33 1/3rpm, 45rpm, 78rpm
(optional)
Drive unit: Decoupled and resonance damped DC motor, at belt-drive
and plug-in power supply unit designed for worldwide use
with all networks and power frequencies.
Bearing: Cut and polished ceramic shaft in a sintered bronze bushing,
Clearaudio ceramic magnetic bearing (CMB)
Platter: Synthetic material, surface CNC-precision milled, surface
CNC-precision milled, 1.1 inches / 40mm thickness
Speed accuracy (measured): 0,05%
Power consumption: Max. consumption: 3.3 watts
Consumption in operation: 1.6 watts
O mode: 0.0 watts
Total weight: approx. 11kg
Dimensions (W/D/H in inches): approx. 16.54 x 12.99 x 4.92 (without tonearm)
Dimensions (W/D/H in mm): approx. 420 x 330 x 125 (without tonearm)
Warranty: 5 years*
* Provided that the warranty card is correctly completed and returned to Clearaudio, or your product is registered
online at https://clearaudio.de/en/service/registration.php, within 14 days of purchase.
Clearaudio electronic is not responsible for typographical errors in descriptions.
Technical specications subject to change or improvement without prior notice.
Product availability is as long as stock lasts.
Copies and reprints of this documents, including extracts, require written consent from
Clearaudio electronic GmbH; Germany
Made in Germany 13
User manual
The full, extended warranty period for the
Performance DC
turntable is 5 years. To receive this full
Clearaudio warranty, you must either complete and return the relevant section of the warranty
registration card to Clearaudio, or register your product online at https://clearaudio.de/en/service/
registration.php, within 14 days of purchase. Otherwise only the legal warranty of 2 years can be
considered. The full 5 year warranty can only be honoured if the product is returned in its original
packing.
ENGLISH
WARRANTY For warranty information, contact your local Clearaudio distributor. RETAIN YOUR PURCHASE RECEIPT
Your purchase r eceipt is your permanent record of a valuable purchase. It should be kept in a safe place to be r eferred
to as necessary for insurance purposes or when corresponding with Clearaudio.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase.
Your purchase receipt or invoice is adequate for such proof.
FOR U.K. ONLY
This undertaking is in addition to a consumer‘s statutory rights and does not aect those rights in any way.
FRANÇAIS
GARANTIE
Pour des informations sur la garantie, contacter le distributeur local Clearaudio.
CONSERVER L‘ATTESTATION D‘ACHAT
L‘attestation d‘achat est la preuve permanente d‘un achat de valeur. La conserver en lieu sur pour s‘y reporter aux ns
d‘obtention d‘une couverture d‘assurance ou dansle cadre de correspondances avec Clearaudio.
IMPORTANT
Pour l‘obtention d‘un service couvert par la garantie, il incombe au client d‘établir la preuv e de l‘achat et d‘en corroborer
la date. Le reçu ou la facture constituent des preuves susantes.
DEUTSCH
GARANTIE
Bei Garantiefragen wenden Sie sich bitte zunächst an Ihren Clearaudio Händler. Heben Sie Ihren Kaufbeleg gut auf.
WICHTIG!
Die Angaben auf Ihrer Quittung erlauben uns die Identizierung Ihres Gerätes und belegen mit dem Kaufdatum die
Dauer Ihrer Garantie-Ansprüche. Für Serviceleistungen benötigen wir stets die Gerätenummer. Diese nden Sie auf dem
Typenschild auf der Rückseite des Gerätes oder auch in der beigefügten Garantie-Registrierkarte.
NEDERLANDS
GARANTIE
Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Clearaudio.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een waardevol artikel en dienen op een veilige plaats
bewaard te worden voor evt, verwijzing bijv, in verbend met verzekering of bij correspondentie met Clearaudio.
BELANGRIJK
Bij een evt, beroep op de garantie is het de verantwoordelijkheid v an de consument een gedateerd bewijs v an aankoop
te tonen. Uw kassabon of factuurzijn voldoende bewijs.
14 © clearaudio electronic GmbH, 2019/01
User manual
ITALIANO
GARANZIA
L’apparecchio è coperto da una garanzia di buon funzionamento della durata di un anno, o del periodo
previsto dalla legge, a partire dalla data di acquisto comprovata da un documento attestante il nominativo del Rivenditore e la data di vendita. La garanzia sarà prestata con la sostituzione o la riparazione gratuita delle parti difettose.Non
sono coperti da garanzia difetti derivanti da uso improprio, errata installazione, manutenzione eettuata da personale
non autorizzato o, comunque, da circostanze che non possano riferirsi a difetti di funzionamento dell’appar ecchio. Sono
inoltre esclusi dalla garanzia gli interventi inerenti l’installazione e l’allacciamento agli impianti di alimentazione.
Gli apparecchi verranno riparati presso i nostri Centri di Assistenza Autorizzati. Le spese ed i rischi di trasporto sono a
carico del cliente. La casa costruttrice declina ogni responsabilità per danni diretti o indiretti provocati dalla inosservanza delle prescrizio-ni di installazione, uso e manutenzione dettagliate nel presente manuale o per guasti dovuti ad uso
continuato a ni professionali.
ESPAÑOL
GARANTIA
Para obtener información acerca de la garantia póngase en contacto con su distribuidor Clearaudio.
GUARDE SU RECIBO DE COMPRA
Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo
en un lugar seguro y utilizarlo como referencia cuando tenga que hacer uso del seguro o se ponga en contacto con
Clearaudio.
IMPORTANTE
Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuándo ef ectuó la
compra. En este caso, su recibo de compra será la prueba apropiada.
Made in Germany 15
clearaudio electronic GmbH
Spardorfer Straße 150
91054 Erlangen
Germany
Phone/Tel.: +49 9131 40300 100
Fax: +49 9131 40300 119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
Handmade in Germany
(Technische Änderungen vorbehalten -
Technical specication are subject to change without prior notication)
2019
© clearaudio electronic GmbH, 2019/01 Made in Germany
Loading...