Clear Rover Puck User Manual

To turn on the Puck, press and hold the power
button for 3 seconds.

While the Puck is searching for the CLEAR 4G
network, the 4G indicator flashes green.

Once the Puck is connnected to the CLEAR 4G
network, the 4G indicator will stop flashing and
turn solid green.

Once the wi-fi status indicator turns green, the
Puck is ready for you to connect your laptop or
wi-fi-enabled device.

SET IT UP (continued)SET IT UP

Please completely charge your Rover Puck by
CLEAR (Puck), which will take approximately 5
hours or until the power indicator changes from
amber to green. (You can charge the battery
while you’re using the Puck.)

Use the included Wall Charger, Micro USB Cable
or even the Car Charger to charge the battery.
The fastest charging time is achieved through the
Wall Charger.

CAUTION: Ensure you carefully align

the Micro USB with the charging
port on the Puck, as inserting
the Micro USB improperly can
cause damage.

LET’S GET STARTED

Rover PuckTM by CLEAR

®

Place the Puck near a window or outside wall to
receive the strongest signal. The Puck wi-fi signal
range is 100-150 feet, so you don’t have to be next
to the Puck to connect your devices.

CONNECT TO
THE INTERNET

(continued)

We recommend you use a laptop to set up
your Puck.

In order to indentify your Puck wi-fi password,
turn your Puck over and look for the password
located on the label in the middle of the device.

NOW YOU ARE READY TO CONNECT TO THE
INTERNET:

• With your computer’s wi-fi turned on, view
the list of available wireless (Wi-Fi) networks

• Select the default Rover 4G Service network
(PUCKxxx * Rover) and click “Connect”

• Enter the default 8-digit wi-fi password
located on the back of your Puck

• Once your computer is successfully
connected to your Puck via wi-fi, you will
receive a message indicating you
are connected

4G Signal Strength Indicator

Power on/o

Power

Wi-Fi

4G

4G Signal/Battery Strength

Micro USB Charging Port

Press and release to show signal strength

Press and release to show battery strength

CONNECT TO
THE INTERNET

The first time you connect to the internet, using
your Puck, you will need to set up your CLEAR
online account.

• Open a new browser session, and you’ll be
directed to a web page where you should
review your rate plan information, complete
your online account, and read and accept the
CLEAR Terms of Service

Congratulations! You’re ready for

INTERNET AWESOMENESS

Be sure to check-out our “QUICK TIPS” and

“HAVE A QUESTION?” sections.

HAVE A
QUESTION?

Please read the separate “Important Information”
document included with your Puck for regulatory
information, safety information, and other
important disclosures.

If you have questions about your Puck, please
access the online User Guide, FAQs, and live chat
support at www.clear.com/support.

If you still have questions, please call us at
877-956-4056. We provide automated telephone
support 24/7 and live telephone support between
9am and 10pm, seven days a week.

Coverage area limited. Actual CLEAR network performance
may vary and is not guaranteed. See Device, Support,
and other relevant pages at www.clear.com for additional
information. CLEAR and the CLEAR logo are trademarks or
registered trademarks of Clearwire Communications LLC. Other
company, product, and brand names and trademarks are the
property of their respective owners. © 2011 Clear Wireless LLC.
All rights reserved.

Rover Puck for CLEAR : Part Number : CL-R-PRH-QSG-1.11

QUICK TIPS

It’s easy to manage your Puck using the Puck
Home Page. You can change settings, view signal
strength, control the number of users, and change
the network name and password. Enter http://
Puck into your web browser. The Password is
located on the back of your Puck.

TO EXTEND THE BATTERY LIFE:

• Decrease the wi-fi network range

• Limit the number of wi-fi users

TO MAXIMIZE SECURITY:

• Change the Puck wi-fi network name and
password

• Use the highest level of wi-fi security your
wi-fi-enabled devices support; check your
device’s user manual for instructions

BROWSER STUCK?:

• If your browser is stuck on a message from
CLEAR, follow the on screen instructions
to view the message and provide any
requested information

For more help, click “HELP” on the Puck Home
Page.

QUICK TIPS

You can share your Puck with up to eight wi-fi­enabled devices. Give friends and colleagues your
Puck network name and password.

IF YOU CHANGED YOUR NETWORK NAME AND
PASSWORD AND CAN’T REMEMBER THEM, YOU
CAN RESET THEM:

• Power o your Puck

• Press and hold the Signal Strength Button

followed by the Power Button, keeping both
buttons pressed for 10 seconds

• The Signal Strength and Battery level LEDs
will light, 1 per second and then both the Wi­Fi and 4G LEDs will blink amber twice when
the factory reset is occurring

• At this point you can release the buttons and
the Puck will finish starting up

• The network name/password and all other
device settings have now been reset to the
factory default settings