Clear HOTSPOT TO GO Quick Start Manual

HOTSPOT

TO GO

QUICK START GUIDE

STEP 1:

Power on your CLEAR Spot Voyager by pressing and
holding the power button (button on the left side
“PWR”) until you see 4G LED lights come on.

STEP 2:

When the 4G LED lights stop ashing, your CLEAR
Spot Voyager is ready to connect any wi--enabled

device. Connect your Spot to your PC or Mac device
using the Wi-Fi Network Name (SSID) and Wi-Fi
Default Password located on the back of your Spot.

On your computer, open the Wireless Network

Connection located at the bottom right-hand corner
of your computer screen. Select the Wi-Fi network
name of your device and enter the Wi-Fi password
when prompted. That’s it! You are now ready to start
browsing the web.

CHECK OUT OUR COVERAGE MAP @

www.clear.com/coverage

HOTSPOT

TO GO

LOAN PERIOD ......................................................... 14 days

OVERDUE FINES ............................................. $5 per day

REPLACEMENT FEE .................................................... $45

Wireless Internet for on-the-go
Up to 6-hour battery life

Connect up to 8 wi--enabled
devices

Must be 18+

Must have a Sandusky Library card
in good standing

....................................................................

WHAT’S INCLUDED:

HOTSPOT device, Quick Start Guide, AC Power Adapter

and USB Cable.

....................................................................

114 West Adams Street, Sandusky, OH

419-625-3834 www.sandusky.lib.oh.us