Cleankeys CKPXXW, CKD User Manual

Limited Warranty Coverage

Cleankeys Inc. warrants Cleankeys to be free from malfunctions and
defects in both materials and workmanship for two years from the
date of purchase. Retain the original dated sales receipt. Proof of
the date of purchase will be required with any request for warranty
repair. Warranty service is only available from within the country
where Cleankeys was originally purchased. You may be required to
ship Cleankeys, at your expense, to the authorized service facility
designated by Cleankeys Inc. Cleankeys Inc. will repair or replace your
Cleankeys if it fails to function properly during the warranty period,
subject to any conditions and/or limitations stated herein. Warranty
service will include all labor as well as any necessary adjustments
and/or replacement parts. If Cleankeys Inc. is unable to repair or
replace your Cleankeys, Cleankeys Inc. will, at its option, refund the
purchase price paid for your Cleankeys provided it has been returned
to Cleankeys Inc. along with proof of purchase price paid. Repair,
replacement, or refund of the purchase price are the sole remedies
under the warranty. If replacement parts are used in making repairs,
those parts may be remanufactured, or may contain remanufac­tured materials. If it is necessary to replace the entire Cleankeys, it
may be replaced with a remanufactured Cleankeys. Remanufactured
Cleankeys, parts and materials are warranted for the remaining war­ranty term of the original Cleankeys, or 90 days after the date of
repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Cleankeys Inc.
control. This warranty does not apply when failure is due to shipping
damage, accident, alteration, modication, unauthorized service,
misuse, abuse, dropping, failure to follow Cleankeys Inc. operation,
maintenance or repacking instructions, or claims made after the
duration of this warranty. Cleankeys Inc. makes no other express or
implied warranty for this product, and disclaims the implied warran­ties of merchantability and tness for a particular purpose. In the
event that the exclusion of any implied warranty is ineffective under
the law, the duration of the implied warranty will be one year from the
purchase date or such longer period as required by law. The option
of repair, replacement, or refund is Cleankeys Inc. only obligation.
Cleankeys Inc. will not be responsible for any special, consequential
or incidental damages resulting from the sale, purchase, or use of this
product regardless of the cause. Liability for any special, consequential
or incidental damages (including but not limited to loss of revenue or
prot, downtime costs, loss of the use of the equipment, cost of sub­stitute equipment, facilities or services, or claims of your customers
for such damages resulting from the purchase, use, or failure of your
Cleankeys), regardless of cause or for breach of any written or implied
warranty is expressly disclaimed.

Product registration

Please go to the Cleankeys web site (www.cleankeysinc.com) and
register your Cleankeys keyboard.

Regulatory information

European Union Directives Conformance Statement

This device complies with the essential requirements and other
relevant provisions of directive 2004/108/EC.

FCC Rules – Part 15

Keyboard FCC registration number: XWS-CKPxxW
Wireless Receiver FCC registration number: XWS-CKD
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Industry Canada (IC) Notice

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
Keyboard Certication Number IC: 8721A-CKPxxW
Wireless Receiver Certication Number IC: 8721A-CKD

WARNING

Changes or modications to this equipment not approved by
Cleankeys can cause this equipment to not comply with
Part 15 of the FCC rules and void the user’s authority to operate this
equipment.

Specications

Keyboard Size: 14.68” x 5.64” x 0.68” (373mm x 143mm x 17mm)
Wireless Receiver Size: 1.89” x 0.68” x 0.35” (48.0mm x 17.3mm x

8.9mm)

Keyboard Weight: Glass: 2.0 lbs (0.91 kg), Acrylic: 1.6 lbs (0.73 kg)
Wireless Receiver Weight: 0.21 oz (6 gr)
Color: White
Cable: 8 ft. (2.46m)
Interface: USB over Nordic Semiconductor Frequency Agility Protocol

Wireless

Keyboard (Charging) Power: 5V @ 1A (max)
Wireless Receiver Power: 5V @ 22mA
Supported operating systems: Windows®, Mac, Linux, Unix
Regulatory approvals: FCC, CE, ROHS, IP65
Mounting option: Three #6-32 inserts spaced in a MIS-D 75 Vesa

standard pattern

Operating Environment: 32º F (0º C) to 95º F (32º C)
Warranty: Two year (extended options available)

References

For more information about your new Cleankeys keyboard, go to the
Cleankeys web site (www.cleankeysinc.com). The web site has:

• The Cleankeys keyboard User Guide which contains more detailed
information about the Cleankeys keyboard.

• FAQs and other support information

• Contact information

Cleankeys

Quick Reference

Card

Part number: 12515
Printed in Canada Document version: 01

Connecting the Cleankeys — wireless

1. Turn on your computer.

2. Plug the wireless receiver into a USB port on your

computer.

3. Wait for your computer to recognize the wireless
receiver.

4. Press the power button on your Cleankeys key-

1

board. If your Cleankeys keyboard does not turn on,
the built in battery may need to be charged.

5. Press the Pairing button on the wireless receiver.
The LED on the wireless receiver begins to ash.

2

6. Press the Pairing button on the Cleankeys key­board. The LED on the Cleankeys keyboard ashes
at least once.
When the wireless receiver and the Cleankeys key­board have nished pairing, the pairing LEDs on the
wireless receiver and the keyboard stop ashing.
Note: You must press the Pairing button on the
Cleankeys keyboard within 10 seconds of pressing
the Pairing button on the wireless receiver.

7. To verify the Cleankeys keyboard is working,
touch the caps key. The caps key LED turns on if the
Cleankeys keyboard is recognized by the computer.

10

1 2 3

11

Turning tap sensing on or off

1. Touch and hold fn. The LED above tap on/off shows

5

the current state of tap sensing.
If the LED is off, tap sensing is off.
If the LED is on, tap sensing is on.

45 6 7 8 9

2. If you want to change the current state of tap sens­ing (either on to off or off to on), touch F8.

Changing the touch sensitivity

1. Touch fn and then F11 or F12.

978

The inidcator LEDs light to indicate the touch sensitiv­ity. The number of LEDs that light indicates the sen-

11

sitivity level. Five LEDs indicates high sensitivity. One
LED indicates low sensitivity.

2. Hold fn and touch F11 to lower the touch sensitiv­ity level.
Hold fn and touch F12 to raise the touch sensitivity
level.

Note: You cannot turn touch sensitivity off.

Connecting the Cleankeys — USB cable

1. Turn on your computer.

2. Plug the smaller end of the USB cable into the USB port on your

3

Cleankeys keyboard and plug the larger end of the USB cable into a
USB port on your computer.

3. Press the power button on your Cleankeys keyboard.

1

4. Wait for your computer to recognize your Cleankeys keyboard.

5. To verify the Cleankeys keyboard is working, touch the caps key.

The caps key LED turns on if the Cleankeys keyboard is recognized by
the computer.

Turning on the Cleankeys

1

1. Press the power button on your Cleankeys keyboard.

Checking the battery

4

To check the amount of charge that is left in the Cleankeys keyboard
battery, touch fn and then num. The indicator LEDs light to indicate

11

the current battery level. The number of LEDs that light indicates the
amount of charge in the battery. If all ve LEDs turn on, the battery is
fully charged. If only LED 1 turns on, you need to recharge the battery
soon.

Charging the battery

You can charge the battery by connecting the keyboard to the
Cleankeys charger or a USB port on your computer.

1. Plug the charger into a wall outlet.

2. Plug the wide end of the USB cable into the charger and plug

3

the small end of the USB cable into the USB port on the Cleankeys
keyboard.
When the battery is charging, the red battery LED is lit.
When the battery is fully charged, the green battery LED is lit.

Mounting

You can choose to place your Cleankeys on a counter top or you can
mount the Cleankeys to a wall or bracket. There are three #6-32
mounting inserts on the bottom of Cleankeys. These inserts are
compatible with the RAM-Mount 101 system. Using these mounting
inserts, you can mount the Cleankeys at any angle, including vertical.

Typing on your Cleankeys keyboard

Although the keys on the Cleankeys do not move, you use the same
typing technique on the Cleankeys that you use on a standard key­board. The Cleankeys accomplishes this by combining touch sensing
and tap sensing technology. With touch and tap sensing, unlike just
touch sensing, you must tap the keys with your ngers to type a char­acters. This not only provides a more familiar feel, it also allows you to
rest you ngers on the keyboard.

Touch sensing

The Cleankeys uses touch capacitance technology to sense the touch
of a human nger. This means that you must use your ngers to
touch the keys. Touching or tapping the keyboard with a pencil, for
example, will not activate a key. However, you can use the Cleankeys
with surgical gloves, or any gloves. Just change the touch sensitivity
accordingly.

Tap sensing

When tap sensing is turned on, you must tap the key you want to
type, not just touch the key.
When tap sensing is turned off, the Cleankeys keyboard uses only
touch sensing to sense a keystroke. If tap sensing is off, do not rest
your ngers on the keyboard. If you do the Cleankeys will type each
key that you touch.
Tap sensing is disabled at the factory.

Changing the volume

6

1. Touch fn and then F9 or F10.
The indicator LEDs light to indicate the volume level. The number of
LEDs that light indicates the volume level. Five LEDs indicates high

11

volume. One LED indicates low volume.

2. Hold fn and touch F9 to lower the volume or touch F10 to raise the
volume.
To turn the volume off, hold fn and touch F9 until all ve LEDs are off.

Pausing your Cleankeys keyboard

10

When the keyboard is paused, it does not send characters when the
keys are touched or tapped. This allows you to clean or disinfect the
keyboard surface without inadvertently pressing keys.
To pause the keyboard, touch fn and then esc. The pause LED ashes
when the keyboard is paused. To unpause the keyboard, touch fn and
then esc. The LED turns off.

Cleaning your Cleankeys keyboard

The Cleankeys keyboard is made from ABS plastic and acrylic or
Corian® and glass. You can clean it with anything suitable for those
surfaces. For the acrylic or glass, use a standard glass cleaner (such
as Windex®). For the ABS plastic or Corian®, use any standard coun­ter-top cleaners (such as Vim®). Do not use abrasive cleaners.
The Cleankeys is splash-proof, but should not be immersed in water.
Be sure to pause the keyboard before cleaning the Cleankeys key­board and unpause the keyboard when you are done.

Disinfecting your Cleankeys keyboard

You can disinfect Cleankeys keyboard with any standard disinfectant
solution, including CaviCide®, Opti-Cide3®, and SciCan Optim®. Be
sure to pause the keyboard before disinfecting the Cleankeys keyboard
and unpause the keyboard when you are nished.