CleanFreak TPL-PH12 Owner's And Operator's Manual
TPL-PH12
PROFESSIONAL
POWER WAND FOR CARPET CLEANING
OWNER’S/OPERATOR’S MANUAL
WWW.CLEANFREAK.COM
FOR COMMERCIAL USE ONLY
REVISION 10-12-18
UNPACKING YOUR NEW TRUSTED CLEAN
TPL-PH12 POWER WAND::
When your package is delivered, check the carton carefully for signs of rough handling. If the TPL-PH12 is
damaged, notify the carrier immediately and request an
inspection. Be sure to keep the carton, packing inserts,
packing lists and carrier’s receipt until the inspector has
veried your claim.
CLEANFREAK’s liability ceases when the carrier picks
up the shipment. However, our customer service sta
will be happy to furnish any information needed in
connection with the claim and will attempt to expedite a
resolution.
PLEASE READ BEFORE
OPERATING YOUR NEW TPL-PH12:
Read the manual carefully and completely before attempting to operate the unit. is manual has important
information for the use and safe operation of the machine. Keep this manual handy at all times.
is equipment has been engineered and manufactured
to provide excellent performance and service. To ensure
that your equipment will continue to perform as intended:
• Maintain equipment regularly- following the suggested maintenance schedule provided.
• Use only original OEM parts when servicing.
• Operate equipment with care.
If additional information is needed, please contact
CLEANFREAK at: 800.826.4405
or email customerservice@cleanfreak.com
FAILURE TO COMPLY WITH THE FOL-
LOWING WARNINGS AND INSTRUC-
TIONS WILL VOID THE WARRANTY.
WARNING!
• Make sure the machine is plugged into an electrical
outlet with the same voltage and frequency rating as
shown on the nameplate of the machine. Do not attempt to plug a 115 volt machine into a 230 volt outlet.
• Do not immerse or use this machine in standing water. Such use can cause electric shock.
• Do not use to pick up ammable or combustible liquids such as gasoline or use in areas where they may
be present.
• Do not expose machine to freezing temperatures.
• To avoid electric shock, do not expose the unit to
rain- store indoors only.
• Connect to a properly grounded outlet only. See
“Grounding Instructions.”
• Turn o all controls before unplugging.
• Do not use without lters in place.
• Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair and
anything that may reduce air ow.
• Do not pick up anything that is burning or smoking,
such as cigarettes, matches or hot ashes.
• Do not use machine for dry vacuuming. is machine
is not outtted with a ne dust lter and it will damage the vacuum motor( s ).
• All servicing of CLEANFREAK equipment should be
performed only by CLEANFREAK authorized service centers.
• Keep hair, loose clothing, ngers an all parts of the
body away from openings and moving parts.
• Use extra care when cleaning on or around stairs.
• Do not use replacement parts other than those specied in the parts list. Proper function of the machine
could be aected if substitutions are made.
• Follow maintenance schedule strictly.
All information and specications printed in the manual
are current at the time of printing; however because of
CLEANFREAK’s policy of continual product development, we reserve the right to make changes at any time
without notice.
2
GROUNDING INSTRUCTIONS:
is piece of equipment must be grounded. Should an
electrical malfunction occur, grounding provides a path
of least resistance for electrical current- reducing the risk
of electric shock. is piece of equipment is furnished
with a cord that has a grounding conductor and grounding plug. e grounded plug must only be plugged
into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Connecting the equipment to an improperly grounded
outlet can result in an increased risk of electric shock. A
qualified electrician should be consulted if you are unsure that the outlet is properly grounded. Do not modify
the plug provided with the equipment. If it will not fit
the outlet, have a proper outlet installed by a qualified
electrician.
is appliance is designed for use on a 120-volt circuit.
e grounding plug provided looks like the plug illustrated in Figure 1. Replace the power cord if the grounding pin is damaged or broken.
DAILY MAINTENANCE:
e TPL-PH12 is engineered and built to require minimum maintenance. But like any machine, it does require
some care to keep it in optimum working condition.
Careful attention to these maintenance instructions
will give you maximum operating performance and life
expectancy of the machine.
CAUTION: Disconnect the power cord from the outlet before doing any clean up or maintenance on the
machine
1. Keep the machine clean, inside and out including
brush and brush chamber.
2. Pour a gallon of clean hot water into your extractor.
Tum the pump on and ush the entire system
through the spray nozzles for about a minute to prevent alkaline build-up.
3. Quick connect coupler- Spray with silicone lubricant
to keep coupler from sticking.
4. If the plunger on the valve sticks, disassemble and
spray with silicone lubricant.
Servicing:
In the event that your heater requires service, please
contact CLEANFREAK at:
800.826.4405
or email customerservice@cleanfreak.com
Do not attempt major repairs yourself. CLEANFREAK
will assist you in locating an indepedent service contractor.
Fig. 1
3
Loading...