CleanFreak TPL-17-220-CE-HEAT-TCP Operator's Manual

TPL-17-220-CE-HEAT-TCP
PROFESSIONAL
17 GALLON CARPET EXTRACTOR
OWNER’S/OPERATOR’S MANUAL
WWW.CLEANFREAK.COM
FOR COMMERCIAL USE ONLY
REVISION 1-17-17
TABLE OF CONTENTS
WARNINGS AND SAFETY..............................................................................................
ELECTRICAL INFORMATION.......................................................................................
GROUNDING INSTRUCTIONS......................................................................................
MAINTENANCE................................................................................................................
CORD STORAGE AND SAFETY....................................................................................
MACHINE OVERVIEW....................................................................................................
ACCESSORY HEATER OVERVIEW...............................................................................
HOW TO USE AN ACCESSORY HEATER...................................................................
CLEANING CARPET.........................................................................................................
CLEANING UPHOLSTERY..............................................................................................
UPPER BREAKDOWN.....................................................................................................
LOWER BREAKDOWN...................................................................................................
TROUBLESHOOTING.....................................................................................................
WIRING...............................................................................................................................
3 3, 4 4 4 5 5 6 7 8 9 9 10-11 12, 13 14 15
RECEIVING YOUR NEW TPL-17-220-CE-HEAT-TCP:
When your package is delivered, check the carton care­fully for signs of rough handling. If your TPL-17-220-CE­HEAT-TCP is damaged, notify the carrier immediately and request an inspection. Be sure to keep the carton, packing inserts, packing lists and carrier’s receipt until the inspector has veried your claim.
CLEANFREAK.COM’s liability ceases when the carrier picks up the shipment. However, our customer service sta will be happy to furnish any information needed in connection with the claim and will attempt to expedite a resolution.
PLEASE READ BEFORE OPERATING YOUR NEW TPL-17-220-CE-HEAT-TCP:
Read the manual carefully and completely before at­tempting to operate the unit. is manual has important information for the use and safe operation of the ma­chine. Keep this manual handy at all times.
is equipment has been engineered and manufactured to provide excellent performance and service. To ensure that your equipment will continue to perform as intend­ed:
Maintain equipment regularly- following the suggest­ed maintenance schedule provided.
Use only original CLEANFREAK.COM parts when servicing.
Operate equipment with care.
If additional information is needed, please contact:
CLEANFREAK.COM 888-722-5508
All information and specications printed in the man­ual are current at the time of printing; however because of CLEANFREAK.COM’s policy of continual product development, we reserve the right to make changes at any time without notice.
FAILURE TO COMPLY WITH THE FOL­LOWING WARNINGS AND INSTRUCTIONS WILL VOID THE WARRANTY.
WARNING!
e machine was designed for use on carpet cleaning applications as per instructions and recommenda­tions written in this manual. Any deviation from its proper use or purpose and the consequential damage that may occur is the sole responsibility of the end user.
Disconnect the power cord from the outlet before servicing. Do not leave machine connected to an elec­trical outlet when unattended.
Do not immerse or use this machine in standing wa­ter. Such use may cause electric shock.
When using an extension cord, use only a 3-prong conductor grounding cord-12 gauge wire or heavier.
To avoid electric shock, do not expose the unit to rain or snow. Store it indoors in a heated location only.
Do not use the machine for dry vacuuming.
Use defoamer at all times to prevent damage to the vacuum motor.
Do not use water in excess of 130°F (54°C) in the solution tank
To prevent seal damage and chemical build-up to the pump system, run clean water through the solution lines aer each day’s use.
Use only commercially available carpet cleaning solu­tions and defoamer intended for use with machines of this type. Do not use dyes, bleaches, ammonia, or other additives.
e use of powdered cleaning solution, if not diluted properly, may result in damage to the pump. Pow­dered chemical is not recommended. If powdered chemicals are used, premix in a separate container before placing in the solution tank.
Always read and understand your chemical’s MSDS (Material Safety Data Sheet) before use.
is equipment is not designed to handle or use combustible/volatile substances such as gasoline or kerosene, in, on, or near the machine. e use of such materials will cause extreme hazardous condition.
Do not expose machine to freezing temperatures.
3
All repairs must be done by an authorized CLEANFREAK.COM repair station.
Do not use replacement parts other than original CLEANFREAK.COM parts.
Do not allow your spray stream to remain in one xed location as surface damage may occur.
Check that all spray nozzles are securely fastened. Loose nozzles could be ejected from equipment at high speeds.
is is not a toy. Keep away from children.
Do not pull by the power or use power cord as a han­dle. Always unplug by grabbing the plug and pulling, do not unplug by pulling the power cord.
Inspect cord for damage. Do not use damaged cords. Connect only to properly grounded outlets.
Keep hair, ngers, loose clothing, and body parts away from moving parts and openings.
Turn o all controls before disconnecting machine
Use caution with ejected liquid or chemicals. High pressures and temperatures could be hazardous to nearby people or surroundings.
Do not run the heater dry. always make sure you have water
Do not expose heater to freezing temperatures.
Prevent burns by wearing gloves or using a barrier to remove hot quick disconnects.
Never leave heater or equipment unattended when connected or powered on.
e accessory heater was designed for use on TPL­17-220-CE-HEAT-TCP extractors for carpet, oor and upholstery extraction applications. Any deviation from its proper use or purpose and the consequential damage that may occur is the sole responsibility of the end user.
GROUNDING INSTRUCTIONS FOR 115VOLT:
is piece of equipment must be grounded. Should an electrical malfunction occur, grounding provides a path of least resistance for electrical current- reducing the risk of electric shock. is piece of equipment is furnished with a cord that has a grounding conductor and ground­ing plug. e grounded plug must only be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordi­nances.
WARNING:
Connecting the equipment to an improperly grounded outlet can result in an increased risk of electric shock. A qualified electrician should be consulted if you are unsure that the outlet is properly grounded. Do not modify the plug provided with the equipment. If it will not fit the outlet, have a proper outlet installed by a qualified electri­cian.
is appliance is designed for use on a 120-volt circuit. e grounding plug provided looks like the plug illustrat­ed in Figure 1. Replace the power cord if the grounding pin is damaged or broken.
Extension cords connected to this machine should be 12 gauge, three-wire cords with three-prong plugs and outlets. DO NOT use extension cords more than 25 feet (7.6 m) long.
ELECTRICAL - 115 Volt
Model: TPL-17-220-CE-HEAT-TCP
is machine is designed to operate on a standard 15 amp, 120 volt, 60 Hz, AC circuit. Voltages below 105 volt AC or above 125 volts AC could cause serious damage to the motor.
Figure 1
4
MAINTENANCE:
is TPL-17-220-CE-HEAT-TCP has been engineered and built to require minimum maintenance. But like any machine, it does require basic care to keep it in optimum working condition. Careful attention to these mainte­nance instructions will give you maximum operating performance and life expectancy of the machine.
Weekly :
Check and clean solution lter
Check for obstructions in vacuum pathways
Quarterly:
Check pump, plumbing and ttings for leaks
Check power cords and hoses for tears
CAUTION: Disconnect the power cord from the outlet before doing any clean up or maintenance on the ma­chine
1. Keep the machine clean. Do not allow dust to accu­mulate on external surfaces or near any moving parts.
2. Aer every job, wipe down the surface of the machine with a clean damp cloth.
3. Inspect cord for damage. Do not use machine with a damaged cord.
PERIODIC MAINTENANCE
Use only chemicals safe for extractors
Adhere to the appropriate mix ratios for all chemicals
For optimal performance, it is suggested that the operator ush the system aer every job or at the end of the day.
Pump seals and valves may need to be replaced at the 1000 hour mark if a loss in pressure is noted
CORD STORAGE:
While not in use, storage can be accomplished by wind­ing cord around handle assy. Cord should be completely unwound during operation.
CORD SAFETY
Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing
Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, le outdoors, or dropped into water, return to service center for inspection and repair.
Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or corners. Do not run this TPL-17-220-CE-HEAT-TCP over cord. Keep cord away from heated surfaces.
Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
is equipment should be stored indoors and not exposed to rain.
Daily:
1. Always keep the machine clean inside and out.
2. Pour 2 gallons of clean hot water in the solution tank. Turn the pump on and ush the entire system through the wand nozzles for about a minute to pre­vent alkaline build-up.
3. Remove dirt and lint build-up inside the lter screen in the recovery tank. Lint should be cleaned o so that air ow is not impeded.
4. Check the solution tank strainer in the solution tank. If lint has accumulated on the screen, remove and rinse it in clear running water.
5
Loading...
+ 10 hidden pages