This manual is furnished with each new Scrubby. It provides necessary operation and maintenance
instructions.
READ AND FOLLOW ALL INSTRUCTIONS, WARNINGS AND CAUTIONS BEFORE AND WHEN
USING THIS SCRUBBER. THE MACHINE MAY ONLY BE USED BY PERSONS WHO HAVE BEEN
INSTRUCTED IN ITS HANDLING AND EXPRESSLY ENTRUSTED WITH THE OPERATION
All information and specifications printed in this manual are current at the time of printing. However,
because of Cleanfix’s policy of continual product improvement, we reserve the right to make changes at
any time without notice.
WHEN THE MACHINE IS DELIVERED
Congratulations on your excellent choice. The
Cleanfix Scrubby is a light and easy to handle
battery-powered machine for many different kinds
of routine daily cleaning activities. The machine is
useful for cleaning staircases, walls and other
difficult to reach places.
This scrubber will afford you many years of troublefree operating satisfaction, provided it is given
proper care. All parts are passed rigid quality
control standards prior to their being assembled to
the finished product. Prior to packaging, your
scrubber was again inspected for assurance of
flawless assembly.
This scrubber is protectively packed to prevent
damage in shipment. When the machine is
delivered carefully check the carton for signs of
damage.
Unpack the machine from the carton and inspect it
for any possible damage.
Only a visual examination will reveal damage that
may have occurred in transit. If damaged is
discovered, immediately notify the transportation
company that delivered your scrubber and request
an inspection. As a shipper we are unable to report
any claim for damage. You must origin any claim
within 5 days of delivery. Be sure to keep the
carton, packing inserts, packing list and carrier's
receipt until the inspector has verified your claim.
CLEANFIX’S LIABILITY CEASES WHEN THE
SHIPMENT IS PICKED UP BY THE CARRIER.
Cleanfix will furnish any information needed to
expedite the claim process.
All rights reserved. Content is subject to change.
GENERAL PRECAUTIONS
FAILURE TO FOLLOW PRECAUTIONS AND WARNINGS MAY CAUSE SERIOUS INJURY TO
THE OPERATOR AND CAUSE DAMAGE TO MACHINE, WHICH CAN VOID WARRANTY.
TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: READ ALL INSTRUCTIONS
BEFORE AND WHEN USING THIS SCRUBBER.
• This is NOT a toy. Close attention is necessary
when used around or near children.
To Avoid Electric Shock, Do Not Expose to Rain. Store Indoors.
WARNING
• Keep hair, loose clothing, fingers and all parts
of body away from openings and moving parts.
• Use only as described in this safety/operations
manual. Use only manufacturer’s
recommended attachments and accessories.
•Donot use this scrubber with damaged cable.
If the scrubber is not working as it should,
because it has been dropped, damaged, left
outdoors or dropped into water, contact
authorized service center or factory.
•Do not handle the plug of the scrubber with
wet hands.
• Store scrubber indoors in a dry area. Do not
• Any manner of working that represents a safety
hazard must be refrained from.
•Do not use where anesthetics or oxygen is
used.
• Replace damaged or worn parts immediately
with genuine original equipment parts to
maintain safety and to protect your limited
warranty.
•Do not pressure-wash the scrubber, as it may
cause a short circuit, damage to components
and/or operator injury.
expose to freezing temperatures.
•Do not put any objects into openings. Do not
use with any opening blocked; keep free of
dust, lint, hair and anything that may reduce air
flow.
CLEANING CHEMICALS AND HAZARDOUS DUST/LIQUID
• Attention must be paid to the manufacturer’s safety instructions when using cleaning and care
chemicals. Wear safety glasses and clothing if necessary.
• The danger of using easily flammable, toxic, health-damaging, caustic or irritating substances is
expressly pointed out.
• Do not use the scrubber for surfaces that can release dust and liquids that are hazardous to health.
GENERAL SAFETY INSTRUCTIONS FOR BATTERY-OPERATED MACHINES
•Observe the safety and accident prevention
regulations pertaining to the handling and
installation of batteries.
•Observe the operating and handling
instructions of the battery manufacturer.
• Before charging, check the battery cable
and the charger cable and replace them if
necessary.
• Smoking is strictly prohibited when
charging batteries.
Safety, Operation and Maintenance Manual for Cleanfix Scrubby; Version 1.0
• Avoid open flames, flying sparks and
glowing objects.
• Fire prevention equipment must be easy to
access.
• Drinking and eating is prohibited in rooms
where charging takes place.
• Wash hands thoroughly immediately after
working on the batteries.
•Risk of short ciruit or fire!Do not place
metal objects on the batteries.
2
CARE OF SCRUBBER
This scrubber is designed to be safe when used to
perform cleaning functions as specified. Should
damage occur to electrical parts, the unit should
NOT be used until the damage is repaired by the
manufacturer of an authorized service center. This
will avoid further damage to the scrubber or injury
to the user.
SAVE THESE INSTRUCTIONS!
PARTS & ACCESSORIES
• The disk connected to the motor and the
on/off switch on the handle of the plastic
molding are standard
• Reversible telescope handle, including the
adjustable grip.
• Battery, NiCd 9,6 V 1900 mAh.
• Quick battery charger 120 V
BEFORE USING THE SCRUBBER
These instructions are for your protection and
information.
PLEASE READ CAREFULLY! Failure to follow
instructions or precautions could result in injury or
damage to the user and/or the scrubber.
• Nylon brush (several models, different
degrees of coarseness, suitable for several
purposes, available)
• Nylon pads (different degrees of
coarseness available)
• Microfiber pad
• Solution dispenser.
1. Check that voltage of power source is the
same as battery charger. (120 V)
2. Charging of the battery is only permitted in
dry areas.
3. Put the plug of the charger in the wall
socket and place battery in the charger.
4. Use only battery chargers which are
approved by your dealer.
5. When the green light shows, battery is
charged and is ready for use.
6. Remove battery from charger and insert
into the special opening of the machine
head.
7. Press battery firmly down till bottom. The
catches on the battery take care of bringing
the battery into the right position inside the
machine.
8. Place the brush with nipples up in the holes
of the drive disk on the bottom of the motor.
9. If the nylon brush loses its shape it can be
straightened by immersing the brush in hot
water for 30 seconds. The brush will regain
its original shape.
10. Working with pads, they should be placed
as central as possible on the driving disk
and directly attached to the Velcro.
11. The right working position, depending on
the job, will be obtained by fixing the
telescope handle on the correct length,
using the plastic turn lock.
12. Use the screw buttons, to fix the adjustable
handle in the preferred position.
13. Check that the machine is in proper
condition.
14. Remove obstacles, such as furniture etc.
from the area to be cleaned. Large pieces
can be removed to opposite end of the
room from where you start cleaning.
15. All covers, hoods and lids must be correctly
attached and closed. Make sure all
switches are in the OFF position.
Reversible telescopic handle
16. Place the telescopic handle in the opening
of the handle at the motor part and press
firmly until the fixing button on the
connector comes up. Tighten the fixing bold
on the iron support slightly.
17. Before removing the handle, first loosen the
fixing bolt on the iron support slightly. Push
the button on the connector of the handle
and pull to remove while holding the button.