CleanCraft SuperLite CSL160XL Instruction Manual
CleanCraft SuperLite 160XL
Dual Suction Upright Vacuum System
Instruction Manual
Model: CSL160XL
CleanCraft Limited Warranty
CleanCraft will repair or exchange parts for your vacuum in the event of a manufacturing defect as follows:
Parts: New or comparable rebuilt parts, for one year after original purchase.
Labor: Carry-in service can be obtained during the warranty period by taking or shipping your vacuum to an Authorized CleanCraft War-
ranty Service Center. (Note: Shipping cost is the responsibility of the customer).
Important Warranty Conditions: A purchase receipt or other proof of date of original consumer purchase also will be required before warranty service is rendered.
This warranty covers normal use and does not cover damage which occurs in shipment or failure resulting from alteration, accident, misuse,
abuse, neglect, or improper maintenance.
Statement: This warranty is not transferable and extends only to the original purchaser when a new CleanCraft vacuum is purchased from an
Authorized CleanCraft Dealer. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
CleanCraft Products, Inc.
800-525-3261 www.cleancraft.com
MN-CSL160XL-01
IMPORTANT SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
When using an electrical appliance, basic precautions should be
bserved, including the following: Read all instructions before
o
using your lightweight upright vacuum cleaner.
WARNING: To reduce the risk of fire, injury or electric shock:
Never leave cleaner unattended when it is plugged in.
•
• Unplug from outlet when not in use and before servicing.
• Never use with damaged cord or plug.
• Never unplug by pulling on cord.
• Never pull or carry by cord, use cord as a handle, close door
n cord, pull cord around sharp corners, run cleaner over
o
cord, or expose cord to heated surfaces.
• Never use cleaner if it has been dropped, damaged, left
outdoors or dropped into water. Return it to place of purchase.
• Never allow children to use as a toy.
• Never use outdoors or on wet surfaces.
• Never handle cleaner or plug with wet hands.
• Never put any object into openings, use with blocked opening,
or restrict air flow.
• Never use without dust bag and/or filters in place.
• Never allow hair, loose clothing, fingers or body parts to get
near openings or floor brush in the appliance.
• Never pick up hot coals, cigarette butts, matches or any hot,
smoking, or burning objects.
• Never pick up hard or sharp objects such as glass, nails,
screws, coins, etc.
• Never pick up flammable or combustible materials (lighter
fluid, gasoline, kerosene, etc.) or use in the presence of
explosive liquids or vapor.
• Connect to a properly grounded outlet only.
See grounding instructions.
• Never pick up toxic material (chlorine bleach, ammonia,
drain cleaner
Never use in an enclosed space filled with vapors given of
•
by oil base paint, paint thinner, some moth proofing
substances, flammable dust, or other explosive or toxic vapors.
• Never use for any purpose other than described in this
User’s Guide.
• Use only on dry, indoor surfaces.
• Keep openings free of dust, lint, hair, etc.
•
Keep appliance on a level surface.
• Turn off all controls before plugging in or unplugging cleaner.
Be extra careful when cleaning stairs.
•
• Pay close attention when working around children.
, etc.).
f
This appliance must be connected to a grounded wiring system.
If it should malfunction or break down, grounding provides a safe
path of least resistance for electrical current, reducing the risk of
lectrical shock. The cord for this appliance has an equipment-
e
grounding conductor and a grounding plug. It must only be
lugged into an outlet that is properly installed and grounded in
p
accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-grounding
conductor can result in a risk of electrical shock. Check with a
ualified electrician or service person if you aren’t sure if the out-
q
let is properly grounded. NEVER MODIFY THE PLUG. If it will
not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt
circuit, and has a grounding attachment plug that looks like the
plug in the drawing above. Make certain that the appliance is
connected to an outlet having the same configuration as the plug.
No plug adapter should be used with this appliance.
Grounded
Outlet
Prong or
Grounding pin
Grounded
Outlet Box
PRODUCT FEATURES AND BENEFITS
The Dual Suction System is a lightweight, yet powerful, cleaning
system ideal for commercial use on all types of carpets and
floors.
1. Handle – designed for comfort and easy maneuvering.
2. Power Switch – conveniently located in handle.
3. Handle Tube – lightweight, for easy movement and use.
4. Connector Tube – strong lightweight aluminum tube is
designed for optimal airflow
Dust Tube – large diameter dust tube designed to
5.
minimize clogging.
6. Cloth Bag – durable, reinforced material for years of service.
7. Dust Bag – top loading bag for clean and easy bag change.
8. The Post-Motor Filter – helps to reduce motor emissions.
9. Motor – 6 amps of full cleaning power, saves energy
10. Power Source Plug – grounded for safe, reliable operation.
11. Connector Plug – for enhanced safety.
12. Power Cord – 50 foot heavy-duty, commercial quality for
extended reach.
.
.
SAVE THESE INSTRUCTIONS
PRODUCT FEATURES AND BENEFITS
13. Quick Release Cord Hooks – for quick, easy removal of
ower cord.
p
14. Powerfoot – twin fan/dual suction design for deeply embedded
dirt and superior edge cleaning.
15. Rotating Cleaning Brush – continuous, rotating dual action for
thorough cleaning; white, non-marring bristles.
6. Non-Marring Wheels – safe for use on bare floors.
1
17. Soft Furniture Protection Guard – helps protect furniture
hile vacuuming.
w
18. Hair Cutter – ensures that any long hair or other fibers are cut
and broken down into lengths that are manageable for the
vacuum. This helps to prevent clogs.
19. Filter Cover – easily removes with one screw for easy
ccess to filter.
a
20. Dual Cord Storage – wrap cord around the back of the unit, or
simply hang cord on the front Cord Storage Hook.
21. Tube Release Buttons – allows for easy access in the unlikely
event of the tube clogging.
2. Bag Tension Spring – keeps the bag secure at the base of
2
the bag.
3. Rubber Collars – designed to seal air path at critical
2
connections, preventing loss of airflow.
24. Top Cover – simply removes with 3 screws allowing for easy
belt change.
25. Drive Belt – designed for optimal life and performance.
Loading...