CLC Z406 Users Manual
Operation Instruction
Safety Information
Safety Specifications and Instructions for
Recommended Use Considerations
·Before the use of battery, please carefully read this operation instruction and the battery surface
mark.
·During use, the battery shall be away from the heat source and the high pressure, and the children
shall be prevented from playing batteries. Never knock the battery. This battery shall be only
charged with the original match able charger.
·Do not enable the battery anode and cathode short-circuited. Do not assemble or disassemble the
battery by yourself. Do not put the battery in the damp place to avoid danger.
·Store the battery in good condition if it is not used for a long time. Make the batter in the
half-charge state, not fully charged and also not fully discharged.
Danger warning
·Forbid to assemble and disassemble the battery
The protection mechanism and the protection circuit are arranged in the circuit to avoid
danger. The improper assembly and disassembly will damage the protection function, which will
cause battery heating, smoking, distortion or burning.
·Forbid to cause the battery to be short-circuited
Do not connect the anode with the cathode through the metal. Do not store and move the
batter and the metal together. If the battery is short-circuited, the ultrahigh circuit will flow
through the battery to damage the battery and result in battery heating, smoking, distortion or
burning.
·Avoid using the battery near the power supply
Do not use the battery near the fire source and the oven or in the environment exceeding
Battery of Mobile Phone
80 . Overheat will cause short circuit inside the battery to result in battery heating, smoking, ℃
distortion or burning.
·Use the special charger and correctly charge
The use of non-special charger to charge the battery will cause danger. Charging in the
abnormal condition will cause the loss of the function of the protection circuit inside the battery
and abnormal chemical reaction, and the battery may be heated, smoke, and be distorted or burnt.
·Forbid to damage the battery
Forbid to penetrate into the battery with the metal, beat or knock the battery or damage the
battery by other means, otherwise it will may cause battery heating, smoking, distortion or burning,
even result in danger.
·Do not use the battery for other devices
The improper service conditions will damage the battery performance and reduce the service
life, even cause battery heating, smoking, distortion or burning.
Warnings
·Do not place the battery on the charger for a long time
If the charger still charges the battery beyond the normal charging time, it should stop
charging. Abnormal charging may cause battery heating, smoking, distortion or burning.
·Do not place the charger into the microwave oven or other pressure vessels.
Transient heating or structural damage will cause battery heating, smoking, distortion or
burning.
·The leaky battery should be kept away from fire
If the leaky battery is found (or there is peculiar smell), it shall be kept away from fire,
otherwise the leaked electrolyte will catch fire, even cause other dangers.
·Headphones should not be too loud
Be careful to use headphones, too loud may lead to hearing loss.
Precautions
·Do not use the battery under strong sunlight
Do not use the battery under strong sunlight for fear of heating, distortion and smoking. At
least avoid reducing the battery performance and the service life.
·Anti-static
The protection circuit installed in the battery can avoid various unforeseen circumstances. Do
not use the battery in the high-voltage electrostatic site as the static is easy to damage the
protection board to cause the abnormal operations of the battery such as heating, smoking,
distortion or burning.
·User manual
Before using the battery, please carefully read the user manual and frequently read it as
required.
·Charging mode
Please use the special charger and the recommended charging mode. Charge the battery in the
recommended environmental condition.
·Equipment working temperature
Minus 20 degrees Celsius to 55 degrees Celsius.
Use and maintenance of mobile phone
This mobile phone is a product designed by the good technology. Please carefully use it. The
following suggestions will help the users better use and maintain the mobile phone.
·Place the mobile phone and all parts at the place that the children cannot touch.
·Do not store the mobile phone at the high temperature place. High temperature may shorten the
service life of the electric device, damage the battery, distort or melt some plastic parts.
·Do not store the mobile phone at the low temperature place. When the battery is move to the
normal temperature place from the low temperature place, the moisture may be generated inside
the battery to cause the damage of circuit board.
·Never try to disassemble the mobile phone. The improper handling of unprofessional personnel
may cause the damage of this device.
·Never use the irritant chemicals, clean solvent or corrosive detergent to clean the mobile phone.
To cleaning the mobile phone, please scrub the mobile phone with the duster cloth dipped with
mild suds.
·Please use the original fittings recommended by the manufacturer. The unauthorized fittings may
damage the mobile phone.
·If the mobile phone is moistened accidentally, please turn off and remove the battery, determine
that the mobile phone has been dried, and then use the mobile phone.
·Never make the metal parts (specially configured charger interface and data line interface) in
contact with the charger interface of the mobile phone for fear of short circuit.
Import Instructions
When using this mobile phone, please exactly follow the following precautions to
avoid possible disasters or legal penalties.
Pay attention to flight safety
Never use the mobile phone on the airplane. The navigation system on the airplane may be
interfered by the mobile phone. Many countries regulate that the mobile phone shall be prohibited
to be used on the airplane.
Pay attention to the surrounding environmental safety
Never use the mobile phone in the gasoline station. In addition, never use the mobile phone
in the oil storage plant, the chemical plant and when there are flammable or explosive objects
around.
Pay attention to the traffic safety
Be careful when driving the vehicle, and avoid calling and driving at the same time as far as
possible.
Pay attention to radiated interference
When using the mobile phone, keep the mobile phone away from the article or instrument
susceptible to interference as far as possible. We suggest that you should be 2.5 CM away from the
antenna when using the mobile phone.
Pay attention to the interference with the medical facilities
Some medical instruments may be interfered when the mobile phone is used. Most of
hospitals prohibit you to use the mobile phone in the hospitals.
Pay attention to the storage environment
Keep the mobile phone away from the magnetic equipment such as magnetic card and floppy
disk. The radiation of mobile phone will erase the information stored on the magnetic equipment.
Warnings
There is no part for the user to self-repair in the mobile phone. If you doubt that the mobile
phone is damaged, please rapidly send it to the designated service and maintenance center to be
maintained by the qualified technical personnel. Never disassemble the mobile phone by yourself,
otherwise you may suffer from electric shock or other injuries.
Never let the children to use the mobile phone or its fittings. The improper operation of the
children may damage the mobile phone or its fittings or cause injuries to yourself or others. At the
same time, the removable parts of the mobile phone such as SIM card, memory card, etc. may be
swallowed by the children to cause the danger.
When using the mobile phone, keep the mobile phone away from high temperature and avoid
solarization. Please keep it in the dry and cool place.
Attentions:
1. Before waterproof test, tightly close each position of the battery cover so as to avoid water
leakage.
2. As the USB seat, the earphone seat and the charger seat of the machine belong to waterproof
devices, the machine needs to be dried and placed for a period of time after waterproof test and
only can be used after there is no water in the earphone seat, the USB seat and the charger seat.
1. Introduction
1.1 Insertion and removal of SIM Card
Turn off the phone, open the left upper cover. With a thimble inserted the card slot inside the
round hole. Remove the card seat. Fit SIM card to the SIM seat, with the metal surface downward
and the edge and corner of the card fitting with the card slot. Slide the SIM card buckle to the right
place and then press it down to fix the card. If you need to take out SIM card, please turn off the
phone first, remove the external power source, remove the rear cover, slide the SIM card buckle to
right place and then release it upward, and at last remove SIM card lightly.
Tips: SIM does not support hot plug. Do not remove SIM in standby mode for fear of
damaging SIM card.
1.2 Insertion and removal of Memory Card
Turn off the phone, open the left upper cover. With a thimble inserted the card slot inside the
round hole. Remove the card seat. Fit memory card to the card seat, with the metal surface
downward and the edge and corner of the card fitting with the card slot. Slide the memory card
buckle to the right place and then press it down to fix the card.
Before removing the memory card, turn off the phone first, and then remove the card seat of the
phone.
Tips: This phone does not support memory card hot plug.
1.3 Remove and install the battery
The battery is built-in.
Note: the battery of the phone cannot be removed manually.
1.3.1 Battery
When the new battery is not fully charged, before the use of mobile phone, you should use up
the power of the battery, and then charge the battery by the following ways.
1. Insert the connector of the charger into the charger socket of the mobile phone.
2. Insert the charger into the power supply, the battery symbol will be dynamically displayed,
indicating that the battery is being charged.
When charging is finished, the full battery symbol will be displayed, to prompt that charging
is finished.
After charging is finished, please remove the charger from the power supply, and then unplug
the charging plug from the mobile phone.
Tips: you can charge your mobile phone through USB data connecting line and the computer
connection. If the battery power of your mobile phone has been fully used up, it may be
impossible to charge the mobile phone through USB data connecting line. At this time, you should
use the charger to charge the mobile phone.
2.
Charging
Basic Operation
2.1 Power
Tip: it takes some time to initialize the mobile phone. Please wait patiently.
On/Off the Phone
Long press
If the mobile phone is started firstly but SIM card is not inserted, part of functions in the
mobile phone cannot be normally used. After SIM card is inserted, the mobile phone will
automatically inspect whether SIM card can be used or not.
the power key to turn on/off the mobile phone.
2.2 Screen locking and unlocking
After the mobile
state to save the battery power.
Lock screen/mobile phone: press the power key.
Unlock screen/mobile phone: press the power key, light up the screen and display the screen
locking state. Press the unlocking icon, and slide towards the upside to unlock.
If you have set the locking pattern or password, the mobile phone will prompt you to draw
the pattern or enter the password.
Main menu→setting→security→screen locking.
Set screen locking→pattern locking.
1. Set screen locking→pattern.
2. Pay attention to view the screen tip and the pattern example, and select next for two times.
3. Drag to connect four points by finger to draw the pattern.
4. Continue to select.
5. Draw the pattern again to confirm.
6. Select OK.
to enter the unlocking pattern when being turned on each time. If you want not to enter the
unlocking pattern, please change the screen locking in “Set→security”, enter the unlocking
pattern, and then click None.
phone is idle for a long time, the screen is black to enter into the screen locking
After the unlocking pattern is set, the mobile phone requires to slide towards the upside
Set screen locking→password.
1. Set screen locking→password locking.
2. Enter four characters at least.
3. Continue to select.
4. Enter the character password again to confirm.
5. Select OK.
After the password is set, the mobile phone will require to slide towards the upside to
enter the unlocking password when being turned on each time. If you want not to enter the
unlocking password, please change the screen locking in “Set→security”, enter the unlocking
password, and then click None.
Note: the steps for setting PIN screen lock mode are the same as the above-said steps.
Touch methods
2.3
You can operate the mobile phone by the following methods (please press the corresponding
function keys by finger pulp).
2.3.1 Press:
You can select one icon or option through the press function in the display screen. If under
the main menu, click Information to enter to browse all SMS/MMS and other information.
2.3.2 Click and press:
You can view more menu options through Click and press. For example, when you click and
press a number in the contact detail interface, a pop-up menu will be opened, and you can execute
some option functions in the menu.
2.3.3 Scroll:
Press the scroll bar, and then dray upwards or downwards. For example, when you browse
the contact list, a scroll bar will be popped up on the right. Drag the scroll bar to facilitate to
search the contacts.
2.3.4 Drag and drop:
Press an item by finger, and then drag the finger to move the item.
2.3.5 Double click:
When viewing the photos or web pages, click quickly for two times by finger to zoom in or
out.
2.3.6 Quick slide
When you select the contact in the list through the scroll bar, the quick slide of the touch
screen can be rapidly realized.
When you quickly slide a long column of contacts, click the screen to stop sliding.
Warm tips: to avoid scraping the touch screen, do not use the sharp tool.
Forbid the touch screen to contact with other electric devices. Mute discharge will cause the
failure of touch screen.
To better use the touch screen, remove the protective film of the touch screen before using
the mobile phone.
Query of IMEI number
2.4
1. Main menu→Set→About mobile phone→Status message.
View IMEI number in Status message.
2. Enter “*#06#” in the dial pad to query IMEI number.
2.5
Main Keys
Key Definition
HOME key Return to home screen
Task Manager
Key
Return key Return to the previous screen
Power key Turn on/off, sleep, wake up, long press 10 seconds to
Vo l u m e Ke y Adjust the volume and press the “volume” key on the
2.6 Screen sleep and wake-up
1. To save the power and prevent the unexpected screen touch from starting the program, or
when cleaning the screen, press the power key to enable the screen to sleep. Press the power key
again to wake up the screen.
2. To change the time when the mobile phone automatically enter into the sleep mode, enter
Set→Display→Sleep.
Main screen
2.7
The main screen can be scrolled on the left and right, the applications such as shortcut and
widget can be customized and added.
2.7.1 Add items to main screen
Customize the main screen by adding applications, widgets, folders and shortcut keys for
applications or items.
2.7.2 Move items on main screen
1. Click and press the item to be moved.
2. Drag the item to the required location after being selected.
2.7.3 Delete items from main screen
1. Click and press the item to be deleted.
2. Drag the item to delete.
2.8 WLAN setting
Main menu→Set→WLAN
·WLAN: turn on or off WLAN function.
·Network notification: set the mobile phone as “Notify the user if there is an open network
nearby”.
·WLAN network: search surrounding wireless networks:
1. Press Set→WLAN.
2. Select and turn on WLAN. The mobile phone will scan and search the available WLAN
network and list the found WLAN network names in the WLAN network list.
Enter to Task Manager
re-boot.
camera interface to photograph (No wake-up function).
3. Click and press a network to connect.
4. If the network is protected, the system will prompt to enter the password. Consult the
network service provider or administrator for concrete details.
2.8.1 Delete WLAN network
You can make the mobile phone not store the remembered WLAN network details.
1. Turn on WLAN function.
2. Click and press the connected network name in the WLAN setting screen.
3. Click in the opened WLAN dialog box to cancel the stored.
2.9 Phone Operating Status
3G network signal
strength
Down Load
GSM network using
Full battery power
Battery charging
WLAN signal strength
Headset is plugged in
New Message
Calling
Mute Mode
Open the portable
WLAN
Off-line mode
Alarm clock is set
Missed Call
2.10 Management notice
The top status column of the home screen shows new messages, emails, calendar events, alarm
clock, and the on-going activity (e.g. calling).
3. Dial
3.1 Dial pad:
Main menu→Dial or click dial key
3.1.1 Click and press the keys on the dial pad to enter the phone number.
If you enter the wrong number, click
the whole number, long press
.
to clear the figures one by one; if you want to clear
To dial an international call, long press 0 key to enter the international connection code “+”.
3.1.2 Click and press the dial key under the dial pad to dial the number you enter.
3.2 End a call
Click or click and press Hang up to end a call.
3.3 Answer or Refuse to answer a call
When you receive a call, the relevant incoming information will be displayed on the screen. If you
have a missed call, you will receive a notice.
Slide the icon
on the incoming call interface to to answer the call(drag the
screen lock controller rightward to answer the call if the screen is locked).
Note: Press the drive-by-wire button of the earphone to answer the call if the earphone is fit into
the phone.
Slide the icon
leftward on the incoming call interface to to refuse the
call.
3.4 Refuse via message
Slide the icon
downward on the incoming call interface to , to refuse the call
and send a message of refusal reason.
3.5 Hold a call
Click the wait icon
during the call.
3.6 Mute during call
Click Mute icon during the call.
3.7 Switching between current calls
Get through 2 calls, and then click the call interface.
3.8 Call options
You can execute the following operations during the call:
1. Click Hands-free to use the loudspeaker of the mobile phone.
2. Click Bluetooth to use Bluetooth device.
Tip: before the use of this function, please be sure that the mobile phone has been bound with
Bluetooth audio device and the connection is established.
3. Click the dial pad to enter the figures.
4. Click Add Call to add a new call.
5. Click Call Recording to record the call.
3.9 Call records
The call records include your all dialed calls, received calls or missed calls.
Main menu→Dial→Call records
1. Press the right item, and click the “Call Back” at the bottom to call back.
2. Press the right item, and click the “Details” at the bottom to see the details of the number
and do other work.
3. Press the right item, and click the “IP Dial” at the bottom, you can input the number prefix
manually, then select any number to IP Dial directly.
4. Press Menu→Remove call records to remove the list of call records.
3.10 Make an emergency phone call
Notes: your network service supplier has set one or more emergency numbers. There are
different emergency call numbers in different countries, so the emergency call numbers of your
mobile phone will not be valid in all regions. The emergency call may not be dialed due to the
impact of network, environment or interference accidents.
Main menu→Dial (if the mobile phone has been locked, click Emergency Call).
1. Enter the emergency call number.
2. Click the dial icon to dial the emergency call.
4. Contacts
Create and manage the list of personal or company contacts stored in the mobile phone or
SIM card. Contacts can be used for creating and deleting the contacts, etc.
4.1 New contact
Main menu→Contacts, click New Contact icon to pop up New Contact, and select Phone or
SIM card to create the contact.
Enter the contact name and its relevant information, and then click Finished.
4.2 Backup Contacts
Main menu→Contacts→Press the option menu on the right upper
corner→Import/Export→Pop up import/export contact box, select to be exported to SD/SIM card,
and determine to export.
Note: Backing up contacts requires memory card in the phone.
4.3 Edit or delete contact
Main menu→Contacts
Click the required contact, press edit key to modify the contact, and then click OK on the
upper left corner.
Click the option menu on the upper right corner→delete to delete the selected contact, and
click OK to confirm to delete this contact.
4.4 Add contact into list of favorites
You can add the frequently used contacts into the list of favorites.
1. Open your contact program.
2. Click to enter the contact details interface.
3. Click the star icon to add to favorites.
4.5 Delete favorite contact
Main menu→Contacts→Favorites
Open the Favorite enter the contact details screen, and click the five-pointed star icon, to
delete the contact in the Favorite.
4.6 Use contact group function
Contact groups include the groups you create. You can add members to these groups.
4.6.1 View groups
Loading...