2) Select the wi-fi,to open Wi-Fi. Phone will automatically scan for available wireless networks.
3) Press Wi-Fi settings. Then a list of Wi-Fi network will show the founded network name and security settings. (open network
or WEP、WPA/WPA2 with password).If you enable the notification in Wi-Fi settings, The status box will show this icon
() when open available wireless network founded.
4) Press one of the Wi-Fi choices to connect the network. When you choose open network, phone will connect
to it automatically. If you choose WEP、WPA/WPA2 with password, you should type the password first, then
press to connect it.
Please Note:when the phone is connected to the wireless network,
The status box will show this Wi-Fi icon(), and the approximate signal strengthen (the number of lit bars).If press
the connected network,will display the name of Wi—Fi network, status, speed, signal, strength, security,
information and IP address. If you want to delete the wireless settings, please press “not reserve”. If you want to
connect to this network, you should re-enter these settings.
Please Note:
Unless you choose not to reserve the network, there is no need to re-enter the corresponding password when next connecting to the
previously encrypted wireless network. The phone needn’t to perform additional steps to connect Wi-Fi networks.
Connect to other Wi-Fi networks
1) In the interface of wireless and network, press Wi-Fi settings. The founded Wi-Fi networks will show on the Wi-Fi network
list.
2) Press other Wi-Fi networks, and then you can connect to this network.
3
User Manual
3. Bluetooth
Turn on Bluetooth or set the phone can be detected
2) Press Bluetooth to open the Bluetooth function. After started, the status box will show this icon (). Press “scan for
devices”the it starts to scan for all devices within range.
3) Press Bluetooth settings, all the devices founded will display in the list under the icon.
(select the box “can be detected”, set it to be detected, the other Bluetooth devices will be able to find the phone.)
Pairing and connection of Bluetooth headset
1) Press home>menu, then press settings.
2)Press wireless and internet>Bluetooth settings, then select Bluetooth box, then your phone will scan for the
Bluetooth devices within range ,and show the founded devices in the list under the icon.
Tips:
a. If the scan can’t find your equipment, press scanning equipment to re-scan it.
b. Make sure that the devices wanted are under the detected mode.
3) Press headset in the equipment list to finish the connection.
Notices:generally Bluetooth devices need password to be paired, often use「0000」as the default password.4)The
pairing and connecting status will show under the headset in the Bluetooth devices list. When the headset
connected to your phone, the status box will show this icon()means connected. Then you can use the
headset to make or receive callings.
Cut the connection to the Bluetooth
1) Press home>menu>settings>wireless and internet>Bluetooth settings.
2) In the list of Bluetooth equipment, press or tap and hold the connected hand-free headset.
3) Press and select “cancel the pairing”.
Bluetooth proximity sensor
After pairing the two devices, you can test out the signal is strong or weak by the Bluetooth proximity sensor
device
4. Mail
Load Email
Enter the correct address and password >settings correct port and POP server, check the server settings automatically.
Set the correct SMTP server, check the mails server’s sending and receiving settings, then enter the specified account
name and displayed name on the outing e-mail.> Finish.
Create and send mails
When creating mails, select mails > create mails. Enter the address(recipient)、theme and contents. Press MENU you
could ‘append’、‘ Add Cc/Bcc’, select send or discarded or save as draft.
4
User Manual
5. Dialing
When the icon of internet server appears in the screen, you could dial or receive callings. The signal bar on the top
right corner show the strength of network signal (the maximum with 4 signal bars).
Start dialing
Press the” PHONE” on standby interface. You could choose SIM1 or SIM2 to do the dialing.
Dialing
At the interface,enter the phone number,and then click the dialing key , after that,you should choose one SIM
card or internet call.
Telephone calls in the call log
Every telephone number called and received in“SIM1、SIM2”will reserved in phone’s menu of call log. On the top left
of every call record will show“SIM1 or SIM2”
All numbers in the call log can be dialed by clicking the button ”dial” on the right side of the screen.
When number list appearing,click it to catch details;press it for long you could dial via “SIM1 or SIM 2”, meanwhile
you can edit, delete, save the number or do other operations.
Receive callings
When calling comes(top left will show from which SIM card)press“Answer”and slide towards right until the middle
button, then you can receive callings.
Proximity sensor
According to the distance between phone and human body,it will adjust automatically the switch of the backlight.
During the call, close the phone to the ear, the backlight will turn off automatically,which could save batteries
and prevent inadvertently pressing.
Refuse to answer the phone
a. When standby, calling comes,press “refuse”button and slide towards left side until the middle button, then
you could refuse the calling.
b. When using, calling comes, click on the “refuse” button to refuse the calling.
Telephone recording
During the call,more>start record,you could record the dialog of the call.
1)settings>set other functions of the call in the dialing settings,for example:Call Transfer– after all the settings finished
and turned on,you could transfer the call to a certain number.
2)In settings>dialing settings >other dialing settings,open “call waiting”.After turned on,you can receive another call
when already exist one,The answering and rejecting functions are just like the ordinary phone.
6. Messaging
Send SMS to certain phone number
1) Press main menu>messaging,press“compose new messages”.
2) In the interface of “edit”:
5
User Manual
a. Click “recipient”box to start input method,you can also click“enter”box to start input method,in that
way you can enter characters.
b. Click the button of “send from SiM1 or SIM2”to start sending.
Send messages to multiple numbers
Enter multiple numbers in the box of entering,each number is divided by the comma in English.
Notices:For now this phone can mass messages to almost 20 numbers,the correct number depends on the
characters,you can only enter 312 characters in the box of“recipient”.
When a message is sent or sent again,a little yellow letter will appear. The number 1 or 2 on the letter refers to
SIM1 or SIM2.
When message sending failed,a red triangle with exclamation will appear.
7. Contacts
Open the menu of applications>contacts
Default display phone contacts and SIM card contacts, sort contacts by first letter of alphabet.
Click the Search icon to enter the contact search interface.
Click the "+" to create new contact.
1)contacts>Menu>new contact>
Select Save contacts to phone or SIM card, then into the interface of editing contacts
You can edit the contacts’ picture, name, phone number, e-mail, postal address, then press “finish”.
2) Contacts>Menu>search
a. Enter numbers or letters, if match with contacts, they will be displayed in the search results.
b. If there is no search to match the contacts, the interface will be 'no matching contacts’.
3) Contact>Menu>delete contacts
a. You can select all, click the delete button to delete all contacts, including the contacts of phone and SIM
card
b. You can select one or more individual contact, click Delete, and delete all the selected contacts.
4) Contacts>Menu>groups
a. default group include: VIP, Schoolmate, friends, Family, Co-worker.
b. Select Add Groups, edit the new group name, and go to the contact search interface, you can add the group
contact.
5) Contacts>menu>speed dial
a. Voicemail
b. No.2-9numbers,click ”Tap to add speed dial”, select a contact as a speed dial. After successfully setting the
dialer interface, long press the number keys, you can dial the contact number.
6) Contacts>more
a. click import/export, In the local phone, SIM card and SD card three copies of each other to achieve contact
information. You can select "Copy Source" and then select next, select the contacts to copy, so shat
complete the copy of contacts.
b. Display options, can select the whole or parts contacts in “Only contacts with phones ”,”Phone
6
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.