CLC B106 Users Manual
1. Preface
b
b
Thank you for choosing this Spreadtrum Platform Cellphone.
This device will offer you an unprecedented surprise for it can support two GSM cards with double
standby. Meanwhile, this cellphone is equipped with a 3 megapixel HD digital camera, a MP3
music player and a MP4 video player. Enjoy yourself!
Safety
Please go through, and comply with, the following considerations before using this cellphone.
Please take earphone if making or
answering a call while driving or after
you car is parked.
Any cellphone may be susceptible to
interference, which could affect
performance.
Please use the original battery and
accessories in order to have optimal
performance and prevent phone
damage. Please don’t use unmatched
products.
To avoid interference with blasting
work, please turn off the cellphone on
the site or where two-way radio must
e switched off. Please observe the
local rules.
The cellphone may interfere with aircraft
telecommunication. So please turn off or
switch to flight mode during the flight.
Please turn off your cellphone near the
medical equipment or in the medical
facility where any cellphone must be out
of service.
Please turn off your cellphone in the gas
station or near fuel or chemicals to
prevent explosion.
Burning or disposing of cellphone
attery as usual is prohibited, or it may
cause life risk or environmental
pollution. Please dispose of and recycle
it in compliance with the local
environmental regulations.
If your cellphone needs to be
Some small components (e.g. memory
card, etc.) shall be out of children’s
reach; otherwise it may be swallowed or
connected with other device, please
read the User Guide of the latter.
cause other hazards.
Ensure the cellphone is turned on and
within the service area. Enter the
emergency number, press the talking key
to tell your location. Please don’t end the
Please copy or keep a written copy of
the vital information stored in your
cellphone.
SOS
call without permission.
2. Quick Start Guide
2.1 Insert SIM card and battery
¾ Press turn it off;
¾ Slide the cover downwards and remove it;
Remove the battery. Insert SIM Card 1 (per the mark “SIM1” on the card slot. The contactor shall
face down (note the notch on the SIM card is in line with the slot). Push the SIM card inwards from
the card slot until it absolutely fits the slot. Insert SIM Card 2 in the same manner.
Insert the battery with metallic contact aligned to the cellphone battery contact and replace the
cover.
2.2 Insert memory card
This cellphone supports the T-Flash memory card. After it is inserted, you can browse or copy, etc.
the files stored in the memory card. Also, the memory space of this device can be expanded.
¾ Remove the cover and battery and turn over the cover of the memory card in the direction as
shown thereon;
¾ Let the side of the memory card bearing metallic contact face down, insert the narrower end
into the card slot until absolutely fitted by it, and replace the back cover.
2.3 Battery charging
The cellphone battery may be charged with travel charger.
¾ Insert the battery in the device correctly;
¾ Let the charger arrow towards the screen, insert the charger plug into the interface, and
connect the charger to the standard power supply socket.
¾ After charging is over, cut off the connection between the charger and the standard power
supply socket.
3. Call
3.1 Dialpad
Press the physical keyboard to enter the dialpad
Press “Call”, escape the SIM card select screen. Select SIM1 to dial with SIM1; select SIM2 to dial with SIM2
Press “IP” button to carry out IP dial;
3.2 Making an overseas call.
Enter the country code (in this case, “+” shall be entered by pressing * twice continuously);
Enter the area code (without “0” prefixed to that as usual) and the phone number;
Press “Call”, escape the SIM card option screen. Select SIM1 to dial with SIM1; select SIM2 to dial with SIM2
3.3 Dialing via Contacts
Enter the Contacts and search for the phone number you need;
Press Record for a long time to select Call in the option menu.
3.4 Calling an extension number
Enter the switchboard number;
Press [Add call] and then input the extension number;
Press “call”, escape the SIM card select screen. Select SIM1 to dial with SIM1; select SIM2 to dial with SIM2
3.5 Making an emergency phone
Enter the emergency phone number;
Press “Call”, escape the SIM card select screen. Select SIM1 to dial with SIM1; select SIM2 to dial with SIM2
3.6 Answer or reject incoming calls
If there is an incoming call, press “Answer” to answer it;
If there is an incoming call, press “Reject” to reject it;
3.7 Menu during a call
During a call, you can:
Hold: Press [Hold] to hold current call.
Contacts：Enter into the interface of contact list.
Keypad
Record: Record the call details, and the document will be kept in the file manager automatically.
It is illegal to record any call in some countries. So please do so with the speaker’s prior consent.
Mute: Turn off the microphone during the call. In the mute mode, you can hear the speaker but the speaker can’t
hear you.
Hands-free: Start or cancel a handsfree call.
Adjust volume: You can volume the receiver by down key during a call
End a call: Press “Hang up” to end a call.
：Enter into the dial interface.
Note:
4. Call Log
Roll to any number and press the dial button reply the call, and can press [Menu] to select other operations.
Commonly Used Functions:
Press the single record for a long time, and open the option menu.
Call: call again.
Edit number before call: Edit the current number before call
Write message: Send message to the current number.
Add to blacklist
Add to contacts : Store the number to this phone.
Remove from call log: Remove the current number.
：Set the phone number as a rejected call
.
5. Contacts
5.1 Browsing contacts
When this device standby, select [Contacts] and open the namelist.
The contacts are listed in the order of unnamed, special symbol, digit and English letter respectively (for Chinese
names, the English letter corresponding to their pinyin prevails).
5.2 Quick search
When this device stands by, select [Contacts] and open the namelist.
Press the [Arrow keys] to move to the [Search box]. You may search via the physical keyboard
0~9 keys on the lower part of the screen or the keys on the keyboard (vague search is allowed).
5.3 Creating contacts
SIM1: The input is added to SIM1 with only one number stored under a name.
SIM2: The input is added to SIM2 with only one number stored under a name.
Phnone: All records other than in SIM1 and SIM2 are stored in the memory of this device. Can be
added to the group:Famoly、Friends、Business、Classmates.
Note: Name may be empty, but phone number shall not be so for any new record.
On the contacts list interface, press one record for a long time to operate the following functions:
View contact: View the contact.
Call: ring the contact.
Send message: send one message to the contacts.
Delete contat: Delete the person information.
Edit contact: Edit the contact.
Send contact: send the contact in vCard.
6. Message Service
Message service is actually a network service. This menu works soundly depending on the type of
your SIM card and the service provided by the network operator. Therefore, please check it before
applying such function.
Messaging
Please have the service center number from the network operator before applying this function. The
storage capacity of SIM card depends on its type.
6.1 SMS
This device supports multi-messaging. Five common messages are editable at most with each
containing 268 Chinese characters or 612 English ones.
When this device stands by, open the function menu, select [Message→New Messag] to open the
editing screen and write a message.
6.2 MMS
Short for multi-media service, MMS is just a multi-media message, which supports GIF, JPEG,
WBMP or BMP display.
Select [Message→New Messag] to open the edit screen and edit a message.
Loading...