Operating and Maintenance
Instructions
High Pressure Cleaner
Type HHPC 170/21 60Hz
(Translation)
C.L. BECKER GmbH
Technischer Schiffs- und Industriebedarf
Süderstraße 129
D – 20357 Hamburg
Tel. +49 40 25 00 75 0
Fax +49 40 25 03 57 8
www.clbecker.de
info@clbecker.de
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 1 von 23
1 Contents
1.1 Foreword Page 3
1.2 Signs and symbols Page 4
2 General technical description Page 5
2.1 Description Page 5
2.2 Description of the device Page 6
3 Intended purpose Page 6
4 Important operation and safety indications Page 7-8
5 Transport Page 9
5.1 Loading and transportation Page 9
5.2 Unpack Page 9
5.3 Location of installation Page 9
5.4 Storing of the device Page 9
6 Commissioning Page 10
6.1 Preparation for commissioning Page 10
6.2 First commissioning Page 11-12
6.3 Re-Start-Up Page 12
6.4 Operating with chemicals (optional) Page 12-13
7 Decommissioning Page 13
8 Maintenance and care Page 14
9 Electrical Page 15
10 Spare Part lists Page 16-17
10.1 Technical data Page 18
11 Troubleshooting Page 19-20
12 Declaration of conformity Page 21
13 Appendix Page 22-23
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 2 von 23
1.1 Foreword
Congratulations on purchasing your HANSEAT high pressure washer. You have purchased a
device that was developed with great care using the latest technology and the relevant
national and European safety standards.
To ensure safe and proper handling an instruction manual is attaches to the high pressure
washer, which is to make available to the operating personnel. It needs to be read carefully
and understood completely before using this device. We expressly point out that we cannot
accept any liability for damages or malfunctions resulting from failure to comply with the
instruction manual.
This manual has to be stored for later use.
Under the current guidelines for working with liquid emitters of the professional associations
(BGR 500 / Part 2, Chapter 2.36) this high pressure washer shall be subjected to an annual
audit to guarantee safe operation. The test results shall be recorded in writing.
C. L. Becker GmbH provides briefing / training courses that enable you to us this high
pressure washer as intended, to execute daily recurring maintenance and care an get rid of
small disturbances of the machine. Please call us for details.
Compared to the contents of this manual technical changes, that are necessary to improve the
device, are expressly reserved.
For any inquiries please contact your branch or services agent.
Name: ________________________________________
Address: ________________________________________
________________________________________
Telephone: ________________________________________
Fax: ________________________________________
E-mail: ________________________________________
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 3 von 23
1.2 Signs and symbols
This command sign appears in this manual for the observance of the following operation and maintenance instructions.
This warning sign appears in this manual at all indications for observance of guidelines, regulations, the correct sequence of work and to
avoid damage and destruction of the machine.
This warning sign appears in this manual at all work safety informations,
which remind dangers for body and life of persons.
This warning sign appears in this manual at all work safety informations,
which remind dangers by electrical power.
This warning sign appears in this manual at all work safety informations,
which warn of rotating shafts.
This warning sign appears in this manual at all work safety informations,
which warn of hot surface.
This warning sign appears in this manual at all work safety informations,
which warn of cutting action by effluent fluids.
This warning sign appears in this manual at all work safety informations,
which warn of excess pressure.
This warning sign appears in this manual at all activities, in which you
have to take care on environmental protection.
This warning sign appears in this manual at all work safety informations,
which warn of the danger of an environment with explosion risks.
This sign appears in this manual at all activities, in which you have to
take care of frost protection.
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 4 von 23
2
G
This ch
a
tion.
2.1
D
low pre
s
(chemic
a
High pr
e
double-
p
double-
p
gun
high pre
s
switch /
motor
pump
circulati
o
pressur
e
high pre
s
dirt trap
water in
l
chemic
a
carrier
lance h
o
eneral
pter describ
escrip
t
sure nozzle
l nozzle)
ssure nozzl
e
ipe
ipe valve
s
sure hose
motor prote
n valve
gauge
s
sure water
et
l hose with
s
lder
technic
a
es the com
p
ion
ction switch
outlet
uction filter
l descri
onents and
a
ption
ssemblies
o
f the high-pressure cle
a
ner and thei
r func-
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 5 von 23
2.2 Description of the device
The water passes through the water inlet and the behind mounted water filter, leading into the enginedriven high-pressure pump.
By the circulation valve the water passed through the high-pressure hose and the gun, is leaded
through the ray pipe and resigns through the high pressure nozzle.
The motor is turned ON and OFF with the motor protection switch and is protected against overload.
The circulation valve is a safety valve preset by the work, that regulates the working pressure to the
adjusted value and protects the pump from unacceptably high pressure..
Changes and settings are to be carried out only by an expert.
Any changes on the safety valve (breaking the seal) will void the warranty and conformity.
By turning the hand wheel (+/-) the working pressure is adjustable from the minimum to the maximum.
If your high pressure washer has additional equipments, please note the attached supplementary
sheets.
Operation with chemicals (optional)
Would you like to operate your high pressure washer using chemicals, so attach the chemistry hose with the suction filter in the fluid in the tank. Open the double-pipe valve at the
lance entirely. Approx. 10% of the chemical are added to the water, depending on nozzle
size and high pressure hose length.
3 Intended purpose
This device is suited exclusively for the cleaning with the help of pressure water nozzles and is only
determined for objects or surfaces which stand firm of the mechanical effect of pressure water nozzles
as well as the chemical effect of liquid cleaning agent additions.
The purpose of the device is to be followed absolutely. Any other use is to be looked as inexpedient.
The manufacturer does not stick for damages which are caused by an inexpedient use of the device.
The device may not be manipulated improperly. In case of such an improper manipulation the manufacturer refuses any liability for the function and safety of the device.
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 6 von 23
4 Important operation and safety indications
Following indications have to be observed before, during and after operation:
Read and understand this manual before first start up.
In case of intended use hazards are not expected.
This device is to be used only by adult persons over 18 years, which are familiar with
the operation and which have been informed about the dangers. Adolescents over 16
years of age may operate the device only, if it is necessary to achieve its educational
objectives and their protection is assured by a supervisor.
By the National Federation of Industrial Trade Association issued regulations "Working
with liquid radiators" (BGR 500 / Part 2, Chapter 2.36) are to be observed.
Operate the machine not unattended and only as intended.
Always wear protective clothing!
1 Protective helmet
2 Ear protection
3 Protective goggles
4 Face protection visor
5 Protective suit
6 Protective gloves
7 Protective boots
The water jet may never be directed upon persons, animals, electric devices or the
device itself, because the high pressure jet exerts a dangerous cutting effect.
When opening the gun you have to observe, that the spray device acts as both a recoil and a torque. Pay attention to your own state security.
If you do not use the device, lock the trigger in the closed position so that the gun cannot be opened
accidentally .
Lock the lever position not in the open position or otherwise do not block it from closing.
Spray guns, which do not close the valve immediately when you release the lever (wear or contamination) should not be used anymore.
BA HHPC-170/21 60Hz englisch
Art.Nr. 02505004/60/BECKER/ENG
Stand 05/2013 Seite 7 von 23
Loading...