Classic Tech Development HP1291, HP1290, HP1292S User Manual

HP1290

(HP1291 + HP1292S)

Cordless Stereo 900Mhz

Headphone System

User's Manual

(draft)

INTRODUCTION

This 900Mhz compact stereo headphone takes advantage of the very latest
advances in wireles s trans m ission tec hnolog y and unique SRS surround effect
so that you can liste n to music or the soun d f rom your TV set bot h in t he house
and outdoors. All you have to do is connect the transmitter to any audio source:
DVD player, CD player, TV set, VCR, Hi-Fi system or radio (range 100 meters).

FEATURES

1. SRS Surround Effect

2. Automatic Phases Lock Loop (PLL) scanning system on headphone

3. Phase Lock Loop (PLL) transmission system on transmitter

4. Automatic battery recharging (batteries supplied).

5. 900 MHz RF technology.

6. RF technology leaves you completely free to move around.

7. Transmission is not restricted solely to line of sight.

8. Rechargeable receiver headphones.

9. Charger built into the transmitter.

10. High quality stereo sound that is virtually interference-free.

11. Automatic Level Control (ALC) and Auto On/Off function.

INSTALLATION

TRANSMITTER

1. Connect the mains adapter provided to an electrical outlet.

2. Connect the mains adapter cable to the DC IN input connector located on
the transmitter rear panel.

3. A cable is provided from the transmitter rear panel that can be

connected to

the audio outputs (Left and Right) present on a TV set, Hi-Fi system, VCR or
radio-cassette player, or to a headphones/earphones output using the
connector supplied.

The red Auto On indic ator light wi ll li ght up as s oon as you have c onnect ed t he
power adapter to the m ains outl et and t he aud io cab le to a si gnal s ource. If the
Auto On indicator light rem ains off, s witch on the audio sourc e an d incr ease its
output level until the red indicator light comes on.

HEADPHONE

1. Two rechargeable LR03/AAA size batteries have been built-in in the battery
compartment and no insertion is required.

OPERATION

1. Switch on the sound source (TV set or audio component) that the
transmitter is connected to.

2. Place the headphones On/Off switch in the On position.

3. Place the headphones on your h ead and adjust the volum e to obtain the
desired sound level.

4. If you cannot find the best reception frequency, press the "Auto Scan"
button on the headphones. The corresponding indicator light will come on.