Classic Cantabile SP-10 User Manual

Download

0001647

Version 01/2012

Classic Cantabile SP

-10 Stage Piano

Users

manual

Using the Instruction Manual

Precautions

Please read the following carefully before use:

Do not expose the piano to high temperature, direct sunlight and excessive dusty places.

Do not place the piano too close to other electrical appliances such as television and radio. It may cause interference.

Do not place the piano to excessive humid area. Avoid putting container with liquid on top of the piano in order to prevent damage of the internal parts of the piano by flowing liquid.

Always unplug AC cord by gripping the plug firmly, but not pulling on the cable.

Do not apply excessive force to the switches and buttons.

When the piano is not in use or in the time of thunderstorm, please disconnect the power supply.

Avoid adjusting the volume level to the maximum or to the levels that you feel uncomfortable, we recommend you to limit the volume level to two-thirds of the max for preventing the damage of audiory sense.

Unplug the power cable before cleaning the piano. Do not connect or disconnect the power cable with a wet hand.

Check and clean the power plug periodically.

Clean the piano and remove the dust with a dry soft cloth or a slightly damp cloth.

Never use cleaners such as thinner or alcohol. To prevent any damage on the surface of the LED display, please use lens cleaning tissue to clean the display.

If the piano cable is damaged, please do not use the piano. Otherwise it may cause fire or electrical hazard.

In case of malfunction due to improper handling the piano, please switch off and on again after 30 seconds.

Do not attempt to disassemble or repair the piano. If the piano does not work properly, please contact the approved repairer.

The piano should not be exposed to dripping or splashing.

Congratulations on your purchase of this stage piano! The piano is an user friendly piano with fabulous sound quality and advance feature such as scale practise and MIDI controller. No matter you are adult or children, you will enjoy playing the piano as it provides amazing styles for accompaniment, expressive tones, and real time record. Other features such as lesson function, variety of songs will help you better master the playing skil. This piano also provide with SD card function, you can choose your favorate MIDI song to play;You can also backup your recording setting to SD card.

You are recommended to study this manual carefully before using the unit.

To avoid damages, turn off the power switches before you disconnect the related devices from the piano.

Main Feature

General Guide

Control Panel

The Connectors

- Power Jack

- Headphones Jack

- AUX OUTJack

- Sustain/Soft Jack

- MIDI IN/OUT Jack

Operation

- Power on & Master Volume

- Song

- Voices and Effects

- Metronome

- Style Control

- Record

- Lesson

- SD Function

MIDI

- MIDI Controler

- Command

- Channel

- Value

- MIDI OUT

- What is MIDI

Specifications

Voice List

Style List

Song List

MIDI Implementation Chart

7-8

7 7

7 8

9-19

9 9

15 15-16 17-18

18 18-19

20-24

28-29

Conent

Main Feature

Note:

1. Pressing "+" and "-" together when turning on the piano will put all volume back to default setting.

2. " * ": There is a standard SD external Interface which supports the cards of 16M 2G capacity. It is compatible with the file system format of the FAT 16 / 32 only

Top View

Rear View

CONTROL PANEL MUSIC STAND

AUX OUT L / MONO

HEADPHONES JACKS PIANO KEYBOARD POWER JACK

SOFT PEDAL JACK

AUX OUT R AUX IN SUSTAIN PEDAL JACK

MIDI IN/OUT JACKS USB JACK

L/MONO

SOFTSUSTAIN

USBAUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

L/MONO

SOFTSUSTAIN

USBAUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

6 8 9 10

General Guide

POWER SWITCH

START/STOP

FILL A/FILL B

BRILLANCE MASTER VOLUME

ACC.VOL

RECORD PLAY/STOP TRACK 1/SONG MELODY OFF TRACK 2 TRANSPOSE +/TEMPO +/MIDI CONTROL

- MIDI OUT

- COMMAND

- VALUE

- CHANNEL

STYLE VOICE

SONG

REVERB/CHORUS

SD SLOT

+ & VOICE DIRECT SELECT BUTTONS LED DISPLAY( VOICE, STYLE, SONG)

SCALE DUAL SPLIT

TOUCH METRONOME SD CONTROL

- PLAY

- STORE

Control Panel

25 26

11 12

15 16

When an optional set of stereo headphones is connected with the headphones jack 2, the sound from speakers will switch off automatically resulting in only the sound from headphone to be heard.

When jack 1 is connected with the stereo headphones, the sound can be heard from both headphones and speakers of the piano.

Headphones Jack 1

Headphones Jack 2

Headphones Jack

Never use the headphone with high volume, as it may hurt your sense of hearing.

To prevent the damage of the speakers, ensure that the volume is set to the minimum level before connecting the power and other devices.

AUX OUT Jack

Power Jack

This piano can be powered from a standard household wall outlet by using the specified AC adaptor. The power jack is located on the rear panel of the piano body. Make sure that only the AC adaptor specified for this piano is used. The adaptor shall be 12V DC output, and center positive type.Make sure to turn off the piano before you connect the adaptor into the AC wall outlet and the cord into the unit.

The piano is supplied with a music rest that can be attached to the instrument by inserting it into slot at the rear of the control panel. Please set up the music rest as shown.

Cautions£¡

Use of another type of adaptor creates a danger of fire and electrical shock.For safety sake, make sure to unplug

the AC adaptor from the wall outlet whenever leaving the

piano unattended for a long time or during a thunderstorm.

Setting Music Rest

To avoid damaging the speakers, please ensure that volume has set to the minimum level before connecting the power and other devices.

When you want to listen to the voice with an amplifier, connect amplifiers to the AUX OUT L/MONO and R jacks on the rear panel. The volume is adjusted with the VOLUME button. (For monaural playback, use the L/ MONO jack. For stereo playback, connect both L/ MONO and R jacks.)

L/MONO

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

L/MONO

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

L/MONO

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

L/MONO

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

An optional footswitch can be plugged into the SUSTAIN jack for sustain control. The footswitch function is like the sustain pedal on a piano.

MIDI stand for Musical Instrument Digital Interface.

MIDI is a world wide standard that makes it possible for various electronic musical instruments and other devices.

MIDI IN:

MIDI OUT:

Data transmitted from other MIDI instrument via MIDI is received by this terminal.

Data produced by the Digital Piano is to other MIDI instruments via MIDI from this terminal.

transmitted

The audio output from a CD player/iPod connected to the AUX IN jack on the rear panel can be mixed with the sound of the piano brain. This function is convenient when you want to play along with a favourite song. The volume of the external signal is adjusted with the VOLUME button.

An optional footswitch can be plugged into the SOFT jack for soft control. Step on the soft pedal , all notes

played on the keyboard have a soft effect.

AUX IN Jack

Sustain Jack

Soft Jack

MIDI IN/OUT Jack

USB Jack

L/MONO

SOFTSUSTAIN

Step the sustain pedal on to open the SUSTAIN function , it will apply SUSTAIN effect to the piano, then release the sustain pedal to turn off the effect.

Connect PC or other USB host devices that support USB Audio.

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

L/MONO

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

You can simply connect the PC and the piano with

a USB cable. For PC that has installed Windows XP, the USB driver for the piano would be automatically

installed as a USB Audio Device. After the PC informed you that the driver for the piano has been properly installed, you can choose the USB Audio

Device in the audio device menu of the control panel

or the MIDI software you are using to ransfer MIDI data to the piano.

Note: USB connection can only be detected with

Windows XP and Vista

Press the [POWER] switch. The LED display

lightens

Slide the [VOLUME] bar rightwards, the whole volume increase, slide it leftwards, the whole volume decreases.

Press the [+] and the [-] button synchronously, and then power on the piano. it can reset all the setting to the default value and erase the record data.

Power on & Master Volume

Song

Press the power switch on

Press first to stop playing the song, press again to play current song repeatedly.

The level decreases The level increases

NOTE:

If the LED display has not lightened up after you power on the piano, please check the power supply.

If the piano is silent, the volume may be adjusted to its minimum level.

Although Mains switch is in OFF position, the piano is not disconnected from the power supply completely!

VOICE

STYLE

SONG

Press together

There are 60 songs in total. (See Appendix 3 ).

PLAY a song:

Press the [SONG] button to enter the song mode, the SONG flag on LED is lightened. It will play all songs

repeatedly in a cycle.

Press the [START/STOP] button to stop playing the song, but it will not quit the song mode. The 2nd time you start playing the song by pressing the [START /STOP] button, it will play current song repeatedly.

STYLESTYLE

SONGSONG

VOICEVOICE

Enter the song mode and play all songs circlely.

Song flag is lightened

VOLUME

MAX MIN

up.

SELECT a song:

Use the [+] or [-] button to select the song you want. If you select the new song, LED will display it's number at first and then display introductory beat and the measure count.

INTRODUCTORY BEAT: After pressing [START/STOP] , the measure count begins from negative value to 1, and then begins to play the song.

Press the [TRACK1] button to enter self-learning mode, and turn on/off the main melody of the song.

While the song stop playing, you can press the [VOICE] and the [STYLE] button to exit.

VOICE

STYLE

SONG

Select a song

Display the measure count

The beat LED indicators are lightened in turn.

The LED indicator is lightened.

STYLESTYLE

SONGSONG

VOICEVOICE

Exit the song mode

Voices and Effects

There are 20 voices in total (See Appendix 1).

Voice Select

When power is on, LED lightens the VOICE flag and displays the 001 voice number.

Press the [VOICE] button to enter the voice mode, LED displays the VOICE R1 number.

Press the [DUAL] button to enter the dual voice mode, LED displays the VOICE R2 number.

you can select other voice by pressing the [+] and the

[-] or voice Direct Select buttons.

VOICE

STYLE

SONG

Display VOICE R1

Display VOICE R2

Select a voice

Press the first time to select GRD.PIANO

Press the second time to select BRT.PIANO

Use Direct Select buttons to select

There are 10 voices Direct Select buttons to select 20 voices. Each Direct Select button can be used to choose 2 different voices.

Press the first time to select upper layer voice , press the second time to select the lower layer voice.

When you select the upper layer voice, the upper layer indicator turns on.

When you select the lower layer voice, the lower layer indicator turns on and the upper layer indicator turns off.

Turn on the DUAL voice

The indicator goes off.

Press the [DUAL] button to turn on the DUAL mode, the VOICE flag on the LED and the indicator are both lightened. The dual voice number is also displayed on the LED.

Then, you can get two different sounds at the same time when you press one key on the keyboard.

Use the [+] / [-] button and voice Direct Select buttons to select your desired voice. The default voice number is 007.

Press the [DUAL] button again to turn off the DUAL mode, the indicator goes off.

Select a dual voice

VOICE

STYLE

SONG

Voice flag is lightened

Two voices will sound at the same time.

Eg. Piano

STR. TRIO

Dual

The piano has dual voice. You can create the new sound through this function for richer and punchier sounds. you can get two different sounds at the same time when pressing one key in the right area in the keyboard.

While the keyboard is in split mode, only the right hand area can respond the dual voice, the left hand not below split point would respond.

NOTE:

VOICE

STYLE

SONG

VOICE

STYLE

SONG

Display split parameter

Change split point

The indicator is flashing.

VOICE

STYLE

SONG

Melody area

Chord area

Default split point F#3

You can split the piano to melody and chord area by this function.

Press the [SPLIT] button, LED displays the current split parameter XXX .

Use the [+] / [-] button or Keyboard to change it, after exit the setting mode the new value becomes to the new split point, the split default value is 34.

The new split point belongs to the left area of the keyboard.

Split Point

VOICE

STYLE

SONG

Display touch value

Select touch response type

This function allows you to turn on the dynamic level when playing the keyboard.

When power is on , the TOUCH indicator lightened. Press the [TOUCH] button continuously to select the touch response type, the TOUCH indicator flashes and displays touch response type 00X temporarily on LED.

There are 4 touch response types. Press [TOUCH] button repeatedly to select, the default is 002.

If the type is set as OFF, it means no touch response to keyboard, the TOUCH indicator goes off.

NOTE:

If you don't press anybutton for 2 seconds in touch response type select mode,it will quit this mode automatically.

The indicator flashes

VOICE

STYLE

SONG

Touch

You can change the pitch of the entire keyboard by semitone steps with TRANSPOSE function.

Press the [TRANSPOSE +] or [TRANSPOSE -] button for the first time, LED displays current transpose value temporarily.

Press [TRANSPOSE +] to increase the value and Press [TRANSPOSE -] to decrease the value, the maximal range to be adjusted is from -12 to +12 semitones, the default value is 000.

In TRANSPOSE setting , press the [TRANSPOSE +] and [TRANSPOSE -] button simultaneously to set the value to default.

NOTE:

If you don't press any button for 2 seconds in transpose setting mode, it will quit this mode automatically.

- TRANSPOSE +

- TEMPO +

VOICE

STYLE

SONG

Display current transpose value

Display default transpose value

increase the value

Decrease the value

- TRANSPOSE +

Transpose

For a mellower sound For a brighter sound

Brilliance

When the piano is power on:

Push [BRILLANCE] splider bar to right, it sounds brighter ; Push [BRILLANCE] splider bar to left, it sounds more gloomy; You can change the piano brilliance as your wish.

Reverb/chorus effect will enhances the piano with fuller and expressive sound.

When power is on , the Reverb/chorus indicator is on.

Press the [REVERB/CHORUS] button to switch the DSP response setting.

VOICE

STYLE

SONG

VOICE

STYLE

SONG

Display touch value on the LED

Reverb/Chorus

VOICE

STYLE

SONG

VOICE

STYLE

SONG

Press [REVERB/CHORUS] repeatedly to switch to reverb or chorus setting mode.

There are 32 level to be selected by pressing [+] and [-] button. The default chorus level is 00, the default reverb level is 08.

This function allows you to experience different scales when you play certain genres of music that is not composed based on twelve equal interval.

Press [SCALE] button to enter into scale mode and the button indicator lights up; The default scale is 001 Pythagor.

There are 6 types of scale to select: Pythagor, Major, Minor, Meantone, Werckmei, kirnberg.

Press [SCALE] button again to exit scale mode and the button indicator goes off.

Hold and press [SCALE] for 2 seconds to enter into SCALE select status. The scale now flashes and the scale number displayed on LED.

Use [+] or [-] to select the scale type, play the key from C7~B7 to select scale root.

VOICE

STYLE

SONG

Enter scale mode and the indicator lights up.

Press and hold the button for 2 seconds to enter scale select status. The indicator is flashing.

Display scale type.

Display scale root.Press the G7 key

Press the button again to exit scale mode. The indicator goes off.

Number Name Number Name 1 Pythagor 2 Major 3 Minor

4 MeanTone 5 Werckmei 6 Kirnberg

Types of scale :

Select the scale type

VOICE

STYLE

SONG

Scale

For Example, to select the scale named "Minor" and set the root key to "G", Press "+" till "003" is displayed on the LED, then press the G7 key for 3 seconds to set the root, LED displays "G", "G" stands for "Scale Root".

ACC VOL

START

/STOP

Metronome

Style Control

Press the [METRO] button to turn on the metronome and the metronome sound will be played.

Press the button again to turn off the metronome.

When the style stops to play, the beat type follows 4/4 after turning on the metronome. When the style begins to play, the beat type follows the current style.

Metronome can be turned on together with the style. If the style plays at first, then to turn on the metronome, the metronome will respond next measure. If the metronome plays at first, then to start to play the style, the metronome responds at once to the first beat of the style.

The LED indicator is lightened.

Metronome can be turned on together with the style.

The beat LED indicators are lightened in turn.

The beat LED indicators are flashing at the same time.

STYLE SELECT

Press the [STYLE] button to enter style mode, the style number and style flag on the LED are both lightened.

You can use the [+] / [-] button to select the style you want.

When the style is not playing, you can press the [START/STOP] button to enter SYNC START mode, the beat point are flashing at the same time, now the style will be start with A.B.C. on if you press the key in the chord area on Piano.

Press the [START/STOP] button again to stop style play and turn off the A.B.C. function at the same time.

There are 20 styles in total. (See APPENDIX 2).

STYLESTYLE

SONGSONG

VOICEVOICE

VOICE

STYLE

SONG

Style flag

Style number

Select the style

VOICE

STYLE

SONG

Enter " SYNC START " mode

Chord area

Start/Stop The Style

VOICE

STYLE

SONG

VOICE

STYLE

SONG

ACC VOL

START

/STOP

ACC VOL

START /STOP

ACC VOL

START /STOP

ACC VOL

START

/STOP

When power is on, the preset style mode is NORMAL mode.

Press the [ACC VOL] button, LED displays the current volume temporarily.

You can use the [+] / [-] button to adjust the volume from 0 ~ 31. (Default Accomp Value is 24) The ACC VOL indicator is flashing at the same time.

When power is on, the ACC VOL indicator is on.

In ACC VOL mode, press the [+] and [-] buttons synchronously can mute the accompaniment, the ACC VOL indicator goes off at the same time; If you press the [+] and [-] buttons again synchronously can open the accompaniment, the ACC VOL indicator is lightened at the same time.

Preset style mode is NORMAL mode, the indicator is off.

Style is not playing:

Style is playing:

The indicator is flashing, after a measure is over, the indicator is on, enter VARIATION mode.

The indicator is flashing, after a measure is over, the indicator is off, enter NORMAL mode.

Press and enter VARIATION mode, the indicator is on.

VOICE

STYLE SONG

The indicator is on.

The indicator is flashing.

The indicator goes off.

Display current volume.

Adjust the volume

Press them together.

VOICE

STYLE

SONG

VOICE

STYLE

SONG

Display default tempo.

- TRANSPOSE +

- TEMPO +

VOICE

STYLE

SONG

Display current tempo

Adjust the tempo from 30~280.

Use the [TEMPO+] or [TEMPO-] button to adjust the tempo from 30 to 280.

Press the [TEMPO+] and [TEMPO-] synchronously to set to the default tempo.

When the style is not playing, it will take out the default tempo of the style if you select the style. When the style is playing, it will keep the current tempo once you change the style.

Tempo

FILL IN A/B

Accomp Volume

- TRANSPOSE +

- TEMPO +

ACC VOL

START

/STOP

ACC VOL

START

/STOP

ACC VOL

START /STOP

ACC VOL

START /STOP

ACC VOL

START /STOP

In NORMAL mode, press the [Fill A / Fill B] button

to insert 1 measure fill and the Fill A / Fill B indicator

is flashing, after one measure is over, VARIATION Style will be returned.

In Variation mode, press the [Fill A / Fill B] button to insert 1 measure fill and the Fill A / Fill B indicator is flashing, after onemeasure is over, NORMAL style will be returned.

ACC VOL

START /STOP

Record

There is

one user song can be recorded, include

2 Melody Tracks.

Waiting for recording:

Press the [RECORD] button for the first time to enter the record mode.

The RECORD indicator flashes, four beats flashes synchronously to indicate waiting for recording.

At the same time an empty track will be selected to be

recorded automatically and relative track flag flashes

(the selection order is Track 1, Track 2, the Track 1 will

be selected while neither the tracks is empty )

You also can press the [TRACK 1] or [TRACK 2] button to select the track you want to record.

Start recording:

When 4 beats flashes on LED, you can play the keyboard directly to start recording, the RECORD indicator and track flag that you select both flashes.

When 4 beats flashes , you can also press the [START/STOP] button, open the A.B.C. and start record.

Press the key in the left area and sync start style, then

style data are recorded to the correspond track.

If the two tracks all have style data, it will be overwrited by the new data.

Stop recording:

Press the [RECORD] button for the second time to stop recording. LED display and indicator get back

to the previous mode.

If the capacity is full while recording, the recording will be stopped automatically with the FUL display on LED.

Enter the record mode, the indicator is flashing.

The indicator turns on.

The indicator is off.

Play the keyboard to start recording.

Select the record track, the indicator will flash.

The indicator will still flash.

The indicator turns on.

Four beats flashes synchronously to indicate waiting for recording.

NOTE:

The recorded data will not be lost when you turn off the power.

Hold on the [+] and [-] button together and power on the piano, it will erase all the recorded data.

Open A.B.C. and start record

Chord area

NOTE:

when entering record mode, the old data of the selected track will lost.

VOICE

STYLE

SONG

VOICE

STYLE

SONG

Record Song

Get back to previous mode.

VOICE

STYLE

SONG

ACC VOL

START /STOP

Press the [PLAY/STOP] button for the first time to playback the record data, you can choose any one track or all two tracks to play, the indicator is on.

Press it for the second time or press the [START/STOP] to stop playback.

You can press the [TRACK 1] and [TRACK 2] button to turn on or off the relative track in process of playback.

Enter the lesson mode, the indicator turns on.

Exit the lesson mode, the indicator turns off.

SD SLOT

Stop playback record.

VOICE

STYLE

SONG

Lesson

SD Function

In song mode, press the [TRACK1] button to enter the lesson mode.

When you press the [TRACK1] button, the [TRACK1] indicator turns on, it will mute the melody of the song, then you can play the Piano to practise the song you want.

Press [TRACK1] again and melody will save, the [TRACK1] indicator again goes off.

STYLESTYLE

SONGSONG

VOICEVOICE

Enter the song mode.

Play the keyboard to practise the song, and the melody of the song will be muted.

There is a standard SD external interface which supports the cards of 16M ~ 2G capacity. It is compatible with the file system format of the FAT 16/32.

Press one of the 2 SD buttons [PLAY], [STORE] to enter the relative function mode.

If there is no card, "ERR" will display 2 seconds.

VOICE

STYLE

SONG

Playback Song

Then, select the track, the indicator is on.

Enter the record playback mode, the indicator is on.

Stop playback record.

Turn on or off the track.

If there is no record data when you press [PLAY/STOP] LCD will display "NUL" temporarily. Press "+" and "-" together when power is on and the song data will be cleared.

NOTE:

START

/STOP

ACC

VOL

SD card function

PLAY can play midi file at the root directory in SD, support format 0 and format 1.

STORE can save the recorded data to SD root directory as midi file which can be played on MIDI player.

SD button

In the SD mode, it won't respond to the other button except [VOICE], [STYLE], [SONG].

It can play MIDI file and save recorded data at the root directory.

Play

When power is on, press the [PLAY] button to play all files at the root directory in SD card and the PLAY indicator is on.

In the SD mode, you can select the midi file with [+] or [-] button. The default file number is 001.

When playing the midi file, you can press the [PLAY] or the [START/STOP] button to stop playing.

Press the [START/STOP] button again to start to play it repeatedly.

Press the [PLAY] button when there is no midi file in the SD card, LED display "noF", then the display will get back to previous mode in 2 seconds.

Store

VOICE

STYLE

SONG

Play midi file at the root directory in SD.

Play all files and indicator is on.

Enter store mode and indicator is on.

After saving, indicator goes off.

The midi file name is generated by system automatically.

Stop playing.

No midi file in the SD

Select the midi file to play.

Start or stop playing the midi file.

Save the recorded data to SD root directory as midi file.

VOICE

STYLE

SONG

Please add the following in the "Store" Section, after "If the SD card capacity is full, it will stop saving auto matically and display "Ful".Then exit the store mode and return to the previous mode."

If there's no MIDI files in the root directory of the card, "NoF" will display on the LED, meaning there's no recorded user song to be saved to the card.

If the card is write-protected, "Loc" will display on the LED.

Press this button, the channel indicator is on, you can select any channel that you want from 1-16 by pressing the [+], [-] or numeric button.

Midi Controler

Under MIDI controller mode, other buttons all have no effect except four MIDI controller, [+]/[-] numeric button, the VOICE/STYLE/SONG button.

When power on the piano, press one of the [COMMAND], [VALUE], [CHANNEL] and [MIDIOUT] MIDI controller to enter into MIDI

controller mode. When in other mode, press the [MIDIOUT] button to send out a set of default midi control command. Press the [VOICE ] / [STYLE ] / [SONG] button, can exit the MIDI controller mode, return to voice, style or song mode.

Press this button, the command indicator is on, you can choose the related command by pressing the [+] / [-] or numeric button.

Press this button, the MIDIOUT indicator turns on and it send out a set of midi control command, the indicator flashes in the process of sending out, when it finish sen ding out, the indicator go off.

Press this button, the value indicator is on, you

can set the value by pressing the [+], [-] or numeric

button.

Exit the MIDI controller mode

into midi controller mode

finish sending out

Summarize

Command

MIDI OUT

Value

Channel

When the button is pressed, the indicator of the button lighter. The LED display 001 (default command), you can select MIDI CTRL information by the numeric button , the [ + ] button or the [ - ] button and

XXX, will displayed on LED. You can set 131

MIDI command (0 130), the default number is 1.

Command

VOICE

STYLE

SONG

The command you select is shown on the LED .

(Once you set 128,”Cn”will be displayed, you set 129, “Dn” will be displayed, you set 130, “En” be displayed), you can select number allowed circlularly by pressing the [ + ] button or the [ - ] button;While setting number with the numeric button,after you press the first number, the command indicator flashes and wait for press the second number, finish pressing the second,

if still allow press the third number, the indicator continues to flash, waiting for press the third number, when you finish pressing the third

number, it will stop flash. If you does not press any button in 2 seconds , it will exit the number

setting status automatically.

number

standard MIDI control(BN)

0 127

program change(CN)

128

129

130

command

channel pressure(DN)

pitch bend(EN)

VOICE

STYLE

SONG

VOICE

STYLE

SONG

VOICE

STYLE

SONG

127

128

129

VOICE

STYLE

SONG

130

If the number you set is from 0 127 , that represent as the DATA1 of Bn order, and the value of DATA2 can be set by pressing [VALUE] button. If the number you set is 128,that means Cn command be selected, the value of DATA can be set by pressing the [VALUE] button . If the number you set is 129, that means Dn command be selected,the value of DATA can be set by pressing the [VALUE] button . If the number you set is 130, that means En command be selected, the value of DATA can be set by pressing the [VALUE] button . When the value you set is 0H, that means to bend the note down to the lowest,

When the value you set is 40H, that means to bend the note to the normal value; When the value you set is 7FH, that means to bend the note up to the highest.

VOICE

STYLE

SONG

VOICE

STYLE

SONG

The button is used to choose the MIDI CTRL channel, from:1~16.

Pressing this button to get into CHANNEL

setting mode, the LED display the current default channel value XX, the CHANNEL button indicator

light up.

Use the [ + ] button, the [ - ] button or numeric

button to choose CHANNEL. You can choose channel allowed circlularly by pressing the [ + ] or the [ - ] button .

You can also set channel with the numeric button, after press the first number, channel indicator

flashes and wait for press the second number, when you finish pressing the second number, it will stop flash. If you does not press any button in 2 seconds , it will exit the number setting status automatically.

If you press the [COMMAND] button or [VALUE]

button, it will get into correspond mode, and the indicator of the corresponding button indicator

turn on, the CHANNEL indicator go off.

If you press the [MIDIOUT] button, it will get into midiout mode.

In COMMAND mode, press the [VALUE]/ [CHANNEL] button to enter into VALUE and CHANNEL setting mode, corresponding button indicator turn on, the COMMAND indicator go off. If you press the [MIDIOUT] button, it will enter into midiout mode and send out midi control message. Press the [COMMAND] button continuously to select the next command type (as follows).

Press the COMMAND button continuously

NO.

Adjustdigit value

Display(default)

Commandtype name 1 2

3 4

0-127

128 129

130

001

Cn Dn En

VOICE

STYLE

SONG

VOICE

STYLE

SONG

VOICE

STYLE

SONG

once

VOICE

STYLE

SONG

twice

thrice

quartic

Channel

VOICE

STYLE

SONG

VOICE

STYLE

SONG

VOICE

STYLE

SONG

Press this button to enter into VALUE setting mode, the indicator is on, the LED will show the default VALUE as 064.

Use the [ + ] button, the [ - ] button or numeric button to set VALUE value from 0 127. you can set value allowed circlularly by pressing the [ + ] button or the [ - ] button . you can also set value with the numeric button, after you press the first number, the value indicator flashes and wait for press the second number, finish pressing the second, if still allow press the third number, the indicator continues to flash, waiting for press the third number, when you finish pressing the third number, it will stop flash.If you does not press any button in 2 seconds , it will exit the number setting status automatically.

If you press the [COMMAND] button or the [CHANNEL] button , it will get into correspond mode and its button indicator turn on, the VALUE indicator go off.

If you press the [MIDIOUT] button, it will get

into MIDIOUT mode.

Value

VOICE

STYLE

SONG

VOICE

STYLE

SONG

VOICE

STYLE

SONG

Press [MIDIOUT] button to sent out a set of MIDI control message. Press this button, the indicator of that button flash within 2 seconds, when finish sending out MIDI CONTROL message, the indicator go off. Press this button doesn't change current mode after sending out MIDI CONTRO Lessage. Continuous pressing the [MIDIOUT] button, it will send out same MIDI CONTROL message.

MIDI OUT

What is MIDI

MIDI IN/OUT

Terminals

MIDI Connection

Connection rule

In midi connection, the equipment which controls another equipment is called Host Equipment. Another equipment is called Affiliated Equipment. The host equipment's MIDI OUT connect with affiliated equipment's MIDI IN. Do not connect MIDI OUT with MIDI IN on the same equipment.

Sample Connection Method

Connect the MIDI interface with your PC.

The piano can control other equipments or electronic instruments.

Some equipments can be used to control the piano.

PC recorded data (MIDI) can be played on the piano.

Connect the MIDI interface with other digital music instruments.

Major Application

Musical Instrument Digital Interface. The standard interface between PC and Electronic instrument.

It is equipped with standard MIDI interface, including 1 MIDI IN and 1 MIDI OUT.

Connection It can connect with PC or other MIDI equipment.

MIDI IN

You can use a MIDI cable to connect the MIDI IN terminal of system to another MIDI OUT terminal of compatible MIDI electronic instrument. Use MIDI IN, system can receive midi data such as note, program and touch etc. in order to be handled by another MIDI instrument.

MIDI OUT

You can use a MIDI cable to connect the MIDI OUT terminal of system to another MIDI IN terminal of compatible MIDI electronic instrument. Midi data of system can be sent by MIDI OUT, when a note is generated, the relative message will be transmitted. System can control other midi instrument by sending program change messages

L/MONO

SOFTSUSTAIN

12V

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT USB

Specifications

Keyboard Voice Style Song Display Switch and Buttons

Transpose Pedals Connectors

POWER SWITCH, VOLUME SWITCH, DUAL, REVERB/CHORUS, TOUCH, RECORD, TRACK 1, TRACK 2, PLAY/STOP, SPLIT, METRO, TRANSPOSE +/-, TEMPO +/-, SD CONTROL, SONG, VOICE, STYLE, BRILLIANCE,MIDIOUT,COMMAND,VALUE, CHANNEL,SCALE, START/STOP, ACC VOL, FILL A/FILL B

88 keys, 3 kinds of touch level. 20 voices. 20 piano styles.

60 songs.

LED display.

12 semi tones Soft, Sustain AC POWER, HEADPHONES, AUX IN/OUT, MIDI IN/OUT, PEDALS,USB

Dimension

Weight

1360(L)x370(W)x143(H)mm

19.5kg

Name of Voice

Name of Style

Name of Voice on Panel

Appendix 1 - Voice List

Appendix 2 - Style List

Acoustic Grand Piano Epiano1 Harpsichord Hammond Organ Accordion Steel Guitar String Trumpet Folk Sax Jazz Flute Bright Acoustic Piano Epiano2 Vibes Church Organ Harmonica STRTRIO Slow String Brass Section Oboe Pan Flute

Pianist 8 Beat 16 Beat Ballad Pop Piano Boogie Slow Rock Swing Jazz Jazz Waltz Swing Fox Shuffle Twist Country Ballad Bossa Nova Latin March 6/8 March Waltz Slow Waltz

001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020

GRDPIANO EPIANO1 HARPSICD DRAWBAR ACORDION STGUITAR STRING TRUMPET FOLK SAX JZ.FLUTE BRTPIANO EPIANO2 VIBES CHRORGAN HAMONICA STRTRIO SLOWSTR BRASS OBOE PANFLUTE

PRG

BANK

0 4

6 16 21 25 48 56 66 73

5 11 19 22 40 49 61 68 75

0 8 0 0 0 8 8 8 8 0 0 8 8 0 0 8 0 0 0 0

Appendix 3 - Song List

For Alice Habanera Four Little Swans Moseta Dance Germanic Dance Turkish March March Away In A Manger Chopsticks 2-Part Invention #13 In A Minor.B.W. Iii

Name of Song Piano

Folk & Country

Golden & Pop

001 002 003 004 005 006 007 008 009 010

011 012 013 014 015 016 017 018 019 020

021 022 023 024 025 026 027 028 029 030

Country Jambalaya Susanna Bridge Battle Hymne Of The Republic The Old Gray Mare American Patrol In The Rain Sippin`Cider Through A Straw Are You Lonesome Tonight

Only You End Of The World House Of Rising Sun The Blue-Bells Of Scotland Over The Rainbow Beautiful Dreamer Edelweiss O Sole Mio Silent Night Ave Maria

Name of Song

Chinese

South Mud Bay Give You A Rose Flowing Rill

Five Hundred Miles Happy New Year

It`S Beginning To Look A Lot Like Christmas

Jeanie With The Light Brown Hair My Bonnie Song Of The Pearlfisher The Stage Coach Entertainer Annie Laurie Killing Me Softly With His Song Last Rose Of Summer The Old King Cole

Jazz & fusion

Maple Leaf Rag June Samba Funk

I Can......

Sea Shore Guitar&Saxphone The Hip Hop's Night Blue Lunch Cobweb Wine Jazz Old Man Dark Eyes Carlos Sad The Jazz

031 032 033 034 035 036 037 038 039 040 041 042

043 044 045 046 047 048 049 050 051 052 053 054 055 056 057

058 059 060

MIDI Implementation Chart

Function

Transmitted Recognized

Remarks

Basic Default

Channel Changed

1ch

1-16ch

Default

Mode Messages

Altered

***********

Note

Number :

True voice

09-120

***********

0-127

Velocity :

Note on

Note off

9nH,V=1-127

9nH,V=0

9nH,V=1 -127

(9nH,V=0;

8nH,V=0- 127)

After

key s

Touch

Ch s

Pitch Bend

Control

Change

120

121

123

Bank Select

Modulation

Portamento Time

Data Entry

Volume

Pan

Expression

Sustain Pedal

Portamento on/off

Sostenuto Pedal

Soft Pedal

Reverb Program

Chorus Program

Reverb Level

Chorus Level

All Sound Off

Reset All

ontrollers

All Notes Off

Program

Change :

true #

***********

0-127

System Exclusive

System Song Position

Common

Song Select

: Tune

System : Clock

Real Time :Commands

Aux :LOCAL ON/OFF

Aux

:LOCAL ON/OFF :ALL NOTES OFF :Active sense :Reset

*1 When the accompaniment is started, an FAH message is transmitted. When accompaniment is stoped, an FCH message is transmitted. When an FAH message is received, accompaniment is started. When an FCH message is received, accompaniment is stoped.

Messages

Mode 1: OMNI ON , POLY Mode 2 : OMNI ON , MONO : YES Mode 3: OMNI OFF , POLY Mode 4 : OMNI OFF , MONO : NO

MIDI Implementation Chart

Classic Cantabile SP-10 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual