Viso Utensil washers
VISO 50
VISO 55
VISO 55H
VISO 70
VISO 132
How they
perform
Double skinned construction
Self draining wash pumps
Radius corners and uncluttered
machine interior
Large, high and wide wash
chambers
Simple, clear controls
Full coverage filter system
Stand By Rinse Economiser
Intense, power wash cycles
Why Classeq
has the edge
Quieter and cooler working
environment
Improved standards of hygiene
Improved standards of machine
hygiene
Maximises the flexibility of the
machine
Easy staff training
Keeps wash water cleaner for longer
Rinse water kept on standby at a
lower temperature during wash cycle
Attacks even the dirtiest pots
and pans
What it means
for YOU!
Saves on energy and saves
you money
No dirty water left in the machine
Easier cleaning and maintenance and
more consistent results
Even the biggest pots and pans can
be washed
Fewer mistakes means cleaner utensils
Less water changes, cleaner utensils,
lower fuel bills
Reduced energy consumption
Consistent and cost effective
utensil washing
Viso 50
1473
mm
716 mm
Specifications
67 mm
6
Viso 55/55H*
1730
m
m
780 mm
720 mm
Specifications
Viso 70
730
1
mm
50 mm
8
Specifications
50 mm
8
Viso 132
730
1
mm
50 mm
8
Specifications
465 mm
1
Width________________________ 667 mm
epth________________________ 716 mm
D
Depth - Door open __________ 1191 mm
Height ________________ 1473 +/-30 mm
Height - Door open_____ 1473 +/-30 mm
ack Width __________________ 500 mm
R
ack Depth __________________ 600 mm
R
seable wash chamber height__400 mm
U
Operating noise level____________ 68 dB
Weight - Net __________________ 120 kg
uilt in air gap ____________________ yes
B
Rinse Booster Pump __________ standard
uilt in detergent dispenser_____ option
B
Built in rinse aid dispenser ______ option
Double skinned cabinet ____________ yes
Racks per hour (maximum) _________ 30
Water connection - BSP_____________
Water inlet height from
loor level_______________ 198 +/-30 mm
f
(solenoid valve height)
Required water pressure ____ 1 to 4 bar
Required water flow_______________ n/a
(inlet solenoid valve capacity at 3 bar)
Maximum Drain Height
from floor level__________ 390 +/-30 mm
Drain size _____________________ 50 mm
Amps required - 3 Phase
- Water fed @ 40º C ___________ 16 Amps
- Water fed @ 10º C ________________ n/a
Total Connected Load
- Water fed @ 40º C ____________ 7.1 kW
- Water fed @ 10º C_________________ n/a
Wash tank heating_____________ 3.0 kW
Rinse boiler heating
- Water fed @ 40º C _____________ 6.0 kW
- Water fed @ 10º C ________________ n/a
Wash pump size ______________ 1.1 kW
Wash pump capacity ______ 485 Ltrs/min
Wash tank capacity ____________ 20 Ltrs
Wash tank operating
temperature ____________________ 55 ˚C
Rinse boiler capacity ___________ 12 Ltrs
Rinse boiler operating
temperature ____________________ 85 ˚C
Rinse water consumption ________ 3 Ltrs
Extraction Spigot _________________ n/a
Diameter
3
Width _______________________ 720 mm
epth _______________________ 780 mm
D
Depth - Door open __________ 1180 mm
eight_________________ 1730 +/-30 mm
H
Height - Door open 2000/2200* +/-30 mm
Rack Width __________________ 550 mm
ack Depth __________________ 610 mm
R
seable wash chamber height 650/850* mm
U
Operating noise level____________ 68 dB
eight - Net __________________ 155 kg
W
Built in air gap ____________________ yes
Rinse Booster Pump __________ standard
uilt in detergent dispenser_____ option
B
Built in rinse aid dispenser ______ option
Double skinned cabinet ____________ yes
acks per hour (maximum) _________ 30
R
Water connection - BSP_____________
⁄4”
Water inlet height from
loor level ________________ 165-225 mm
f
(solenoid valve height)
Required water pressure ____ 1 to 4 bar
Required water flow_______________ n/a
(inlet solenoid valve capacity at 3 bar)
Maximum Drain Height
from floor level _________ 300 +/-30 mm
Drain size _____________________ 50 mm
Amps required - 3 Phase
- Water fed @ 40º C ___________ 16 Amps
- Water fed @ 10º C ___________ 16 Amps
Total Connected Load
- Water fed @ 40º C ________ 7.4/8.0* kW
- Water fed @ 10º C_________ 7.4/8.0* kW
Wash tank heating ____________ 3.0 kW
Rinse boiler heating
- Water fed @ 40º C ____________ 6.0 kW
- Water fed @ 10º C _____________ 6.0 kW
Wash pump size _______________ 1.4 kW
Wash pump capacity ______ 650 Ltrs/min
Wash tank capacity ____________ 45 Ltrs
Wash tank operating
temperature ____________________ 55 ˚C
Rinse boiler capacity____________ 14 Ltrs
Rinse boiler operating
temperature ____________________ 85 ˚C
Rinse water consumption ________ 4 Ltrs
Extraction Spigot _________________ n/a
Diameter
Width________________________ 850 mm
epth _______________________ 850 mm
D
Depth - Door open __________ 1250 mm
eight ________________ 1730 +/-30 mm
H
Height - Door open ____ 2000 +/-30 mm
Rack Width __________________ 700 mm
ack Depth __________________ 700 mm
R
seable wash chamber height _ 650 mm
U
Operating noise level ___________ 68 dB
eight - Net __________________ 190 kg
W
Built in air gap ____________________ yes
Rinse Booster Pump __________ standard
uilt in detergent dispenser_____ option
B
Built in rinse aid dispenser ______ option
Double skinned cabinet ____________ yes
acks per hour (maximum) _________ 30
R
3
⁄4”
Water connection - BSP ____________
Water inlet height from
loor level ________________ 165-225 mm
f
(solenoid valve height)
Required water pressure ____ 1 to 4 bar
Required water flow_______________ n/a
(inlet solenoid valve capacity at 3 bar)
Maximum Drain Height
from floor level _________ 235 +/-30 mm
Drain size _____________________ 50 mm
Amps required - 3 Phase
- Water fed @ 40º C ___________ 20 Amps
- Water fed @ 10º C ___________ 20 Amps
Total Connected Load
- Water fed @ 40º C _____________ 11 kW
- Water fed @ 10º C _____________ 11 kW
Wash tank heating ____________ 6.0 kW
Rinse boiler heating
- Water fed @ 40º C _____________ 8.0 kW
- Water fed @ 10º C _____________ 8.0 kW
Wash pump size ________________ 3 kW
Wash pump capacity _____ 1200 Ltrs/min
Wash tank capacity ____________ 60 Ltrs
Wash tank operating
temperature ____________________ 55 ˚C
Rinse boiler capacity ___________ 14 Ltrs
Rinse boiler operating
temperature ____________________ 85 ˚C
Rinse water consumption ________ 5 Ltrs
Extraction Spigot _________________ yes
Diameter_____________________ 120 mm
Width ______________________ 1465 mm
epth _______________________ 850 mm
D
Depth - Door open___________ 1250 mm
eight ________________ 1730 +/-30 mm
H
Height - Door open_____ 2000 +/-30 mm
Rack Width _________________ 1320 mm
ack Depth __________________ 700 mm
R
seable wash chamber height _ 650 mm
U
Operating noise level____________ 69 dB
eight - Net __________________ 295 kg
W
Built in air gap ____________________ yes
Rinse Booster Pump __________ standard
uilt in detergent dispenser_____ option
B
Built in rinse aid dispenser ______ option
Double skinned cabinet ____________ yes
acks per hour (maximum) _________ 30
R
3
⁄4”
Water connection - BSP ____________
Water inlet height from
loor level ________________ 165-225 mm
f
(solenoid valve height)
Required water pressure _____ 1 to 4 bar
Required water flow ______________ n/a
(inlet solenoid valve capacity at 3 bar)
Maximum Drain Height
from floor level _________ 235 +/-30 mm
Drain size _____________________ 50 mm
Amps required - 3 Phase
- Water fed @ 40º C ___________ 25 Amps
- Water fed @ 10º C ___________ 25 Amps
Total Connected Load
- Water fed @ 40º C ___________ 15.5 kW
- Water fed @ 10º C ____________ 15.5 kW
Wash tank heating_____________ 8.0 kW
Rinse boiler heating
- Water fed @ 40º C _____________ 9.5 kW
- Water fed @ 10º C _____________ 9.5 kW
Wash pump size_______________ 2x3kW
Wash pump capacity __ 2x1200 Ltrs/min
Wash tank capacity ___________ 115 Ltrs
Wash tank operating
temperature ____________________ 55 ˚C
Rinse boiler capacity ___________ 14 Ltrs
Rinse boiler operating
temperature ____________________ 85 ˚C
Rinse water consumption ________ 8 Ltrs
Extraction Spigot _________________ yes
Diameter_____________________ 180 mm
3
⁄4”
*Relates to the Viso 55H model
Telephone 0844 225 9250 Fax 0844 225 9251 Email sales@classeq.co.uk
Classeq, Roebuck Way, Knowlhill, Milton Keynes, MK5 8WH
Loading...