Clas Ohlson HD-4200 Instruction Manual

HDMI Switch

HDMI-växel
HDMI-veksler
HDMI-vaihde

Art.no. Model

38-2878 HD-4200

EnglishSvenskaNorsk

Suomi

Ver. 200910

HDMI Switch with Remote Control

Art.no. 38-2878 Model HD-4200

Please read the entire instruction manual before use and save it for
future reference. We reserve the right for any errors in text or images
and for making any necessary technical changes to this document.
If you should have any questions concerning technical problems
please contact our Customer Services.

Safety

- The product should only be repaired by qualified service personnel.

- The product is made only for use indoors.

- Never open the casing. Certain components within the product’s
casing contain dangerous currents. Contact with these may give
you an electric shock.

- Do not place the product where it could fall into water or other
type of liquid. Never place the product close to objects that can
cause water or other liquid to spill over the product, e.g.
a vase or a drink.

- Only use the device with suitable or recommended adaptor.

Contents

- HDMI Switch

- Remote control

- AC/DC adaptor

- Instruction manual

English

3

4

English

5

Buttons and Functions

The product’s front

SELECT OUT 1 / 2 Choose which input is to be active.
1-4 Indicates which of the inputs is activated.
HDMI IN 4 A fourth input for simple connection of

e.g. video game.

IR Receiver for the remote control’s signal.

The product’s back

HDMI IN (1-3) Inputs for connection e.g. DVD player,

digital receiver, or video game.

HDMI OUT (1-2) Outputs for connection of TV etc.
5V 1A Connection for adaptor (5 V DC, 1 A).

Installation

Example

1. Connect an HDMI cable (not included) between the output on
the source units (e.g. DVD player or digital receiver) and the
inputs marked “HDMI IN (1-4)” on the HDMI switch.

2. Connect an HDMI cable between the outputs “HDMI OUT
(1-2)” on the HDMI switch and the TV’s HDMI input.

Tip!

Memorize which device is connected to which input/output.

3. Connect the included adaptor to the power connection marked
“5V 1A” and insert the adaptor in a wall socket.

4. Push any of the buttons SELECT OUT to turn on the device.

English

5

6

English

7

Operating Instructions

When the connections are made and the device is turned on it will
automatically search for a new input with an active device connect­ed. The indicator light moves from input to input until an active input
has been found and the light for the active input remains lit.

Choose input for HDMI OUT 1

1. Turn on the device (e.g. TV) that you have connected to the
output “HDMI OUT 1” and choose HDMI as input on the TV
(See the back of the TV).

2. Make sure the device you have connected (DVD player etc.) is
turned on.

3. Push once or several times on SELECT OUT 1 on the HDMI
switch to choose the input you want to watch. The indicator light
in the

Top row shows which input is activated for output 1.

- If you turn off the device that is connected to the active input,
the device automatically moves to the search mode until an
active input has been found.

Choose input for HDMI OUT 2

1. Turn on the device (e.g. TV) that you have connected to the
output “HDMI OUT 2” and choose HDMI as input on the TV
(See the TV’s instruction manual).

2. Make sure the device you have connected (DVD player etc.) is
turned on.

3. Push once or several times on SELECT OUT 2 on the HDMI
switch to choose the input you want to watch. The indicator
light in the
output 2.

Bottom row shows which input is activated for

- If you turn off the device that is connected to the active input,
the device automatically moves to the search mode until an
active input has been found.

NB:

- When an input is already being used by an output this input
cannot be chosen to the other output.

- Only one output can be activated at a time.

Using the remote control

- Push ON/OFF to turn the switch on and off.

- Choose desired input with the buttons IN 1 to IN 4

.

Turn off

- Push and hold any of the buttons SELECT OUT for approx.
3 seconds and push ON/OFF once to turn off the HDMI switch.

Care and Maintenance

Use a soft damp cloth to wipe the product. Never use strong
detergents or solvents.

English

7

8

English

9

Troubleshooting Guide

No indicator lights up

- Check that the adaptor is properly connected and the device
is turned on. Push
turn on the device.

No picture is displayed and no sound is heard

- Check that all cables are undamaged and properly connected.

- Make sure the DVD movie is not copied since HDMI has
copy protection type HDCP (High-bandwidth Digital Content
Protection).

The picture is seen but no sound is heard

- Check that the DVD player or TV is set to the DVI position.

- Use only HDMI cables of newer version than 1.1.

- Turn on and off the device once to reactivate the input.

The HDMI switch does not react on the remote control’s signals

- Check the battery and replace it if necessary.

- Make sure that nothing interferes the remote control’s signals
and the distance is not too big between the remote control and
the HDMI switch.

It is not possible to choose input with the SELECT buttons

- Check that the button can be properly pushed in.

- Cut the power by unplugging the adaptor for a short while and
then turn the device on again.

SELECT once or ON/OFF on the remote to

Disposal

When it is time to dispose of the product, dispose of it according
to your local ordinances. If you are unsure please contact your
municipality.

Specifications

Amount of inputs 3 x type A 19-PIN, 1 x type C 19-pin
Number of outlets 2 x type A 19-PIN
Band width, video amplifier 2.25 Gbps
Support for 480i, 480P, 576i, 576p, 720p,

1080i, 1080p
VGA, SVGA, SXGA (1280x1024),
UXGA (1600x1200)

Output Frame Rate 24 Hz – 60 Hz
Power supply 5 V DC 1 A (provided by the

accompanying 230 V AC adaptor )
Battery type, remote control 1 x CR2025 (included)

English

9

10

Svenska

11

HDMI-växel med fjärrkontroll

Art.nr 38-2878 Modell HD-4200

Läs igenom hela bruksanvisningen före användning och spara den
sedan för framtida bruk. Vi reserverar oss för ev. text- och bildfel
samt ändringar av tekniska data. Vid tekniska problem eller andra
frågor, kontakta vår kundtjänst (se adressuppgifter på baksidan).

Säkerhet

- Produkten får endast repareras av kvalificerad servicepersonal.

- Produkten är avsedd endast för inomhusbruk.

- Öppna aldrig höljet, farlig spänning finns oskyddat på vissa
komponenter inuti produktens hölje, kontakt med dessa kan ge
elektrisk chock.

- Placera inte produkten så att den kan falla ner i vatten eller
annan vätska. Ställ aldrig produkten i närheten av föremål som
kan orsaka att vatten eller annan vätska sköljs över produkten,
t.ex. blomvas eller dryck.

- Använd endast för apparaten avsedd eller rekommenderad
batterieliminator.

Förpackningen innehåller

- HDMI-växel

- Fjärrkontroll

- Batterieliminator

- Bruksanvisning