Clas Ohlson HD-055 Instruction Manual

Air Compressor
Kompressor Kompressori
EnglishSvenskaNorskSuomiDeutsch
Art.no Model
40-9514 HD-055
Ver. 20150601
2
12 V Air Compressor
Art.no 40-9514 Model HD-055
Please read theentire instruction manual before using theproduct and then save it for future reference. We reserve theright for any errors in text or images and any necessary changes made to technical data. If you have any questions regarding technical problems please contact our Customer Services.
Safety
Warning!
• Never leave thecompressor unattended when it is in operation.
• This compressor is only intended for intermittent use. If thecompressor is used for long periods it might overheat. If themetal components become very hot thecompressor should be turned off and allowed to cool for about 30 minutes.
• Never pump too high apressure into therecipient product.
• Tyres are marked with their maximum pressure in psi or bar.
• Do not use thecompressor to pump up high pressure tyres used on certain types of trucks.
• Never attempt to tamper with, repair or modify thecompressor in any way. Anyrepairs and servicing of theappliance must only be carried out by qualified service technicians.
• Thecompressor contains no user-serviceable parts.
• Never carry theair compressor by its mains lead or air hose.
• Never aim theair nipple at any part of your body or another person.
• Never use thecompressor near anaked flame, highly flammable gas or fluid.
• Never let children operate or play with thecompressor. Children must always be supervised when thecompressor is being used.
• Risk of strangulation! Keep thecompressor and its accessories out of thereach of small children.
Disposal
This product should be disposed of in accordance with local regulations. If you are unsure how to proceed, contact your local authority.
3
Product description
2
1
1. Air hose with pump connector
2. Pressure gauge
3. Power switch (1/0)
4. Adapter for inflating bicycle tyres (with older types of valve)
5. Adapter for inflating footballs
6. Adapter for inflating rubber dinghies, airbeds, etc.
7. Power lead with 12 V car lighter plug
3
Operating instructions
Inflating tyres
1. Connect theair compressor to your car’s 12 V socket outlet. Remember that in certain types of cars theignition must be turned on for thesocket to work. Thesocket needs to be protected by at least a10 Afuse and have anoutput of 12 V DC (centre-positive).
54
76
4
2. Open thepump connector on theair hose by lifting thelocking lever. Press thepump connector onto thevalve of thetyre and lock it in place by lowering thelocking lever.
3. Turn thecompressor on and inflate thetyre to therecommended pressure (refer to thecar’s handbook or marking on thetyre itself). Turn thecompressor off, open thepump connector and remove it from thevalve of thetyre. Unplug thecompressor from thecar’s 12 V socket. Coil up theair hose and thepower lead. Car tyres should normally be inflated to pressures ranging from 1.65 bar (24 psi) to 2.2 bar (32 psi). Tyres for large vehicles might need apressure up to
2.75 bar (40 psi). Tyres are marked with their maximum pressure in psi or bar.
4. Theincluded bicycle adapter should be used for inflating bicycle tyres with older types of valves.
• To avoid overheating, under normal load thecompressor should not be used continuously for more than 10 minutes at atime. If you need to inflate for longer you should wait for 10 minutes before starting thecompressor again.
• For heavy loads (pressure over 5 bar), let thecompressor rest after 7 minutes use.
• If thecompressor still overheats, shut it off and let it cool for 30 minutes before you start it again. Let thecompressor cool down before putting it away for storage.
Inflating inflatable toys, etc.
1. Choose asuitable adapter nozzle or pump needle and insert it into thevalve of theobject which you wish to inflate.
2. Attach thecompressor to the12 V socket to start theinflation.
3. Unplug the12 V plug when thedesired pressure has been reached.
Note: Toys and airbeds can burst if you over-inflate them! Be careful and always check thepressure of theobject during theinflation. Never inflate anobject to ahigher pressure than theone which is recommended.
Specifications
Voltage 12 V DC, (centre-positive) Current draw Approx. 4 A Max pressure 17 bar (246 psi) Cable length 3 m Air hose length 45 cm Free air displacement 12 l/min
5
12 V-kompressor
Art.nr 40-9514 Modell HD-055
Läs igenom hela bruksanvisningen före användning och spara den sedan för framtida bruk. Vi reserverar oss för ev. text- och bildfel samt ändringar av tekniska data. Vid tekniska problem eller andra frågor, kontakta vår kundtjänst (se adressuppgifter på baksidan).
Säkerhet
Svenska
Varning!
• Lämna aldrig kompressorn utan tillsyn när den är i drift.
• Kompressorn är endast avsedd för tillfälligt bruk, användning under längre tid
• Pumpa aldrig upp för högt tryck, läs märkningen på produkten som ska pumpas.
• Däck har en märkning med maxtryck angett i psi eller bar.
• Använd inte kompressorn till att pumpa högtrycksdäck som används på vissa
• Försök inte ta isär, reparera eller förändra kompressorn på något sätt. All service
• Kompressorn innehåller inga delar som du själv kan reparera.
• Bär aldrig kompressorn i nätkabeln eller luftslangen.
• Rikta aldrig luftnippeln mot någon del av din kropp eller mot någon annan person.
• Använd aldrig kompressorn nära öppen eld, lättantändlig gas eller vätska.
• Låt aldrig barn använda eller leka med kompressorn. Barn måste kontinuerligt
• Risk för kvävning! Håll kompressorn och dess tillbehör på avstånd från små barn.
medför att kompressorn överhettas. Om metalldelarna blir mycket heta måste kompressorn stängas av och svalna i ca 30 minuter.
typer av lastbilar.
och alla reparationer måste utföras av kvalificerad servicepersonal.
övervakas när kompressorn används.
Avfallshantering
När du ska göra dig av med produkten ska detta ske enligt lokala föreskrifter. Är du osäker på hur du ska gå tillväga, kontakta din kommun.
6
Loading...
+ 14 hidden pages