Clarson CS60 Operating And Installation Instructions

PUBLIC III

CS60 Wireless Headset System

Operating and Installation

Instructions

Notes:

Clarson Apparatebau GmbH

Zeppelinstr. 4 78083 Dauchingen
Postfach 11 63 78080 Dauchingen

Tel.: [phone]

Fax: [phone]

Email: [e-mail]

Internet: http://www.clarson.de

Technical modifications reserved 04/2011

2

7

Notes

Central Unit

Ref. 40.054.311

RJ 45
8-olig

RJ 45

8-pin

RJ 45

8-pin

Microphone Loudspeaker Unit

Ref. 40.054.301 - bottom side

Standard Connection of the CS60 Headset System

to the microphone loudspeaker unit PUBLIC III

RJ 10

4-pin

RJ 45

8-pin

RJ 10

8-pin

Ref. 40.054.327 patch cable, 3 m

with RJ45 connector (8/8-pin),
central unit <—> microphone loudspeaker unit

Ref. 40.054.376 patch cable, 3 m
with RJ10 connector (4/4-pin),
microphone loudspeaker unit <—> CS60 base sta­tion

2



Pos. B

RJ 10

4-pin

RJ45
8-pin

RJ 10

4-pin



+

-



To log on to one or several headsets at the CS60 Base Station

If one or more headsets are required to operate from one CS60 base station,
they need to be paired as follows:

1. Insert the headset into the base station´s charging unit

2. Push and hold the volume buttons +

and - of the base station
for a min. of 5 sec.
The power supply indicator flashes.

3. Push and hold the headset mute button

for a min. of 5 sec.

The online indicator illuminates.

4. Log on has been successful if the power supply indicator illuminates
and the online indicator turns off.

5. This procedure has to be executed within 2 min., otherwise the headset
returns to the initial state and the procedure needs to be repeated.

Operating Manual

1. CS60 Base Station settings:

Slide switch

(speech volume) to B

Configuration dial

to 1

IntelliStand switch

to I

Slide switch (listen volume) to 2

2. Connect the CS60 base station socket  with the headset interface

 of the PUBLIC III microphone loudspeaker unit, or directly with the

PUBLIC III Headset socket of the central unit.

3. Connect the power supply unit to the CS60 base station socket .

4. Turn on the PUBLIC III microphone loudspeaker unit (button ).

Push the CS60 headset speech button .
The LED above the microphone loudspeaker unit push button
flashes, the headset is activated.

5. Return to standard operating mode:

- Push the CS60 headset speech button .

- Turn the PUBLIC III microphone loudspeaker unit push button
off and on again.

6. Please refer for all other functions to the PUBLIC III operating and
installation instructions and the CS60 manufacturer´s instructions.







4



Pos. 1

Base Station

Headset

Base Station

- bottom side -



12

3

22

16

4

5

1

16

6

Pos. 2

Pos. I = OFF

Pos. B

1

7

8

10

7 8

20

20

10

23

23

2

5

12

10

13

25

20

14

16

24

23

15

22

21

18

Slide switch on B (speech volume)
Slide switch on 2 (listen volume)

Speech volume +
Speech volume -

IntelliStand switch in Pos. I = OFF
Configuration dial in Pos. 1

AC power supply unit
AC power supply port

Cable port to PUBLIC III central unit

40.054.311 resp. to microphone loud­speaker unit 40.054.301 (page 2)

Headset charging station
Base station charge contacts

Charge indicator
Talk indicator
Power supply indicator
Microphone

Speaker
Speech button

Listen volume adjustments + / ­Headset mute switch
Online indicator

Headset charge contacts
Battery cover

19

1
2

3
4

5
6
7
8

3

Ref. 40.030.004

Ref. 40.030.005

Neckband with fittings

Ref. 40.030.013

Headset with pre-installed battery,
headband and ear-loop set (3 sizes)

Replacement battery

Ref. 40.030.008

Headset with base station
headband and ear-loop set
(3 sizes)

Charging station

Ref. 40.030.006

6

Power supply unit

Ref. 40.030.014

Headband with leather ear cushion
and spare foam cushion

Ref. 40.030.009

Ear-loop set

(3 sizes with flexible fixing device)

Ref. 40.030.015

Components of the CS60 Wireless Headset System

3

Central Unit

Ref. 40.054.311

Optional Connection of the CS60 Headset-Systems

to the Central Unit PUBLIC III



Pos. B

RJ 10

4-polig

RJ 45

8-polig

RJ 45

8-polig

Microphone Loudspeaker Unit
Ref. 40.054.301 - bottom side

CS60 Basis-Station

- Unterseite -

RJ 45

8-polig

RJ 10

4-polig

Ref. 40.054.378 patch cable, 3 m
with RJ45/RJ10 connector
(8/4-pin),
central unit <—> CS60 base
station

Attention: cable must be ordered
separately!!!

RJ 45

8-polig

3



Pos. B

RJ 10
4-pin

RJ 45

8-pin

RJ 45
8-pin

CS60 Base Station

- bottom side -

RJ 45

8-pin

RJ 10

4-pin

RJ 45
8-pin