Page 1
FOOT PUMPS
MODEL NOS: FP150 & FP300
Part Nos: 7640265 & 7640270
OPERATING INSTRUCTIONS
GC0911
Page 2
INTRODUCTION
Thank you for purchasing this CLARKE Foot Pump.
Before attempting to use the product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will
ensure the safety of yourself and that of others around you, and you can also
look forward to the product giving you long and satisfactory service.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with general household waste. All tools,
accessories and packaging should be sorted, taken to a re-cycling centre
and disposed of appropriately.
GENERAL SAFETY PRECAUTIONS
1. Always thoroughly familiarise yourself with this product & its operation, and
always read and understand the instructions and warnings in this manual
before using the product.
2. Never allow children to use the foot pump.
3. Never over-inflate tyres, toys, balls, lilos etc.
4. Always use in a safe area away from traffic and other hazards.
5. Always ensure that tyre pressure checks are carried out to the tyre
manufacturers recommended pressures.
6. Never overstretch the connecting hose.
USING THE PUMP
WARNING: THE GAUGE IS ONLY TO BE USED AS A REFERENCE, ALWAYS
CARRY OUT A FINAL CHECK OF THE TYRE PRESSURE WITH A GAUGE
CONFORMING TO BS EN 12645.
TYRE INFLATION
1. Fully extend the hose and fix the tyre valve connector onto the vehicle
tyre valve with the thumb lock, ensuring the valve is clean.
• When connected correctly, the gauge will show the current
pressure in the tyre. If this is the correct tyre pressure as stated in
your vehicle handbook, remove the valve connector.
2. If the tyre is below the recommended pressure (as specified in your
vehicle handbook), operate the pump until the pressure is achieved.
2
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
Page 3
ADAPTORS
The pump is supplied with four adaptors for different uses. These are provided
to inflate sports balls, air beds, small inflatables, bicycle and vehicle tyres etc.
To avoid over-inflation, always follow manufacturer’s instructions for the item
to be inflated.
Inflatable adaptor
Toy/air bed adaptor
Sports ball adaptor
‘Presta’ bicycle tyre valve adaptor
MAINTENANCE
Always inspect the pump before use to ensure the connecting hose is in
perfect condition. Keep the pump clean by wiping with a dry cloth. DO NOT
use solvent as a cleaning agent. Always store in a dry place.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase. This guarantee is invalid if the product is found to have been
abused or tampered with in any way, or not used for its intended purpose.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect
your statutory rights.
SPECIFICATIONS
FP150 FP300
Dimensions L x D x H 350 x 90 x 640 mm 335 x 150 x 265 mm
Weight 1.1 kg 1.7 kg
Hose Length 630 mm 650 mm
Pressure Gauge Scale 1: 0-100 psi Scale 1: 0-100 psi
Scale 2: 0-7 bar Scale 2: 0-7 bar
3
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
Page 4
Loading...