Page 1
SITE BOXES
CSB25B,CSB85B & CSB100B
ASSEMBLY INSTRUCTIONS
ORIGINAL INSTRUCTIONS GC0421
Page 2
INTRODUCTION
Thank you for purchasing this CLARKE Contractor Site Box.
Any deficiencies found should be reported to your CLARKE dealer where the
product was originally purchased.
Do not dispose of damaged components or packaging with general
household waste. They should be taken to a recycling centre and disposed of
appropriately.
WEIGHTS & DIMENSIONS
CSB25B CSB85B CSB100B
Part No 7637451 7637471 7637503
Weight 25.09kg 43.27kg 57.34 kg
Dimensions 815 x 485 x 360mm 1070 x 515 x 600mm 1220 x 615 x 725mm
Capacity 110L 210L 370L
Sheet thickness 1.6mm 2.5mm 2.5mm
ADDING CASTORS
The castors ML525S, ML525R and ML525-1 are obtainable separately from your
CLARKE dealer and are compatible with the CSB85B and CBS100B site boxes.
We recommend that one pair of castors are fitted with brakes.
There are no holes drilled into the base of the CBS25B, therefore no castors
can be fitted.
SAFETY WARNINGS
Take care never to trap fingers when closing the lid or to pinch fingers
between the folding side handle and the side of the box.
When fitting castors, obtain the help of an assitant due to the weight of the
box.
DO NOT lift the site box by the side handles if fully loaded.
If heavily loaded, lift and move the site box using the fork truck /fork lift tine
insertion points provided.
2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Page 3
ASSEMBLY
The following castors are available from your CLARKE dealer.
• ML525S (Swivel) Part No 4200165
• ML525R (fixed) Part No 4200190
• ML525-1(braked) Part No 4200140
Carefully turn the site box upside down
using some soft material such as carpet
to protect the surface.
Attach the castors using bolts, nuts and
washers as illustrated.
Line up the castor plate with the holes
in bottom of site box.
Slide a bolt through the washer and
castor plate and into the site box
frame. Tighten with a spanner ,using a
second spanner to lock the nut.
Repeat for the remaining bolts and
castors.
Secure your site box with a good
quality padlock through the
attachment points provided.
NOTE: Suitable padlocks are available from your CLARKE dealer.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for its intended purpose. Faulty goods
should be returned to their place of purchase, no product can be returned to
us without prior permission.
This guarantee does not effect your statutory rights.
3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Page 4
Loading...