• Ensure the horse is located on firm level ground when in use.
• ALWAYS position the horse at the approximate centre of gravity of the piece of work.
• ALWAYS locate the horse in a position where it does not pose a hazard to yourself or
• Do not overload the saw horse...Max. load is 50kg.
• DO NOT use this saw horse for anything other than its intended purpose.
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months
from the date of purchase. Please keep your receipt as proof of purchase. This guarantee
is invalid if the product is found to have been abused or tampered with in any way, or not
used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
others in the vicinity, when not in use.
This guarantee does not effect your statutory rights.
the Support Stand will give you long and satisfactory service.
Thank you for purchasing this CLARKE Saw Horse, ideally used for supporting long pieces of
work when sawing etc.
Please read this leaflet thoroughly, before use, and follow all instructions given. This will not
only provide protection for yourself and that of others around you, but will also ensure that
FOLDING SAW HORSE
SAFETY PRECAUTIONS
GUARANTEE
TWO PIECE
Model No. CSB1
Part No. 3403000
0302
• Ensure the horse is located on firm level ground when in use.
• ALWAYS position the horse at the approximate centre of gravity of the piece of work.
• ALWAYS locate the horse in a position where it does not pose a hazard to yourself or
• Do not overload the saw horse...Max. load is 50kg.
• DO NOT use this saw horse for anything other than its intended purpose.
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months
from the date of purchase. Please keep your receipt as proof of purchase. This guarantee
is invalid if the product is found to have been abused or tampered with in any way, or not
used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
others in the vicinity, when not in use.
This guarantee does not effect your statutory rights.
the Support Stand will give you long and satisfactory service.
Thank you for purchasing this CLARKE Saw Horse, ideally used for supporting long pieces of
work when sawing etc.
Please read this leaflet thoroughly, before use, and follow all instructions given. This will not
only provide protection for yourself and that of others around you, but will also ensure that
SAFETY PRECAUTIONS
GUARANTEE
FOLDING SAW HORSE
TWO PIECE
Model No. CSB1
Part No. 3403000
0302
For Spare Parts and Service, please contact your nearest dealer, or
PARTS & SERVICE TEL: 020 8988 7400
CLARKE International, on the following number.
Height ..................... 780mm (31”)
Width....................... 1000mm (39”)
4. Raise the Saw Horse on to its feet
stability.
against the tabs for maximum
The legs should be bearing up
3. Pull the legs apart and locate
the brace as shown.
IMPORTANT:
1. Lay the unit on its back as shown
PUTTING TO USE
3
4. Raise the Saw Horse on to its feet
stability.
against the tabs for maximum
The legs should be bearing up
3. Pull the legs apart and locate
the brace as shown.
IMPORTANT:
2. Raise the legs.
DO NOT force the legs too far
just far enough to clear the two
tabs, (arrowed).
2
1
1. Lay the unit on its back as shown
PUTTING TO USE
For Spare Parts and Service, please contact your nearest dealer, or
PARTS & SERVICE TEL: 020 8988 7400
CLARKE International, on the following number.
Height ..................... 780mm (31”)
Width....................... 1000mm (39”)
3
2. Raise the legs.
DO NOT force the legs too far
just far enough to clear the two
tabs, (arrowed).
2
1
Loading...