ROLLER STAND LINE
CRSL1 Roller Stand Line.PMD 10/12/2008, 08:551
MODEL No: CRSL1
Part No: 6500947
ASSEMBLY
INSTRUCTIONS
12/08
INTRODUCTION
Thank you for purchasing this Clarke roller stand line.
Before using the roller stand, please read this instruction manual thoroughly
and carefully follow all directions given. This is for your own safety and for
that of others around you, and will also help you achieve long and trouble
free service from your roller stand.
GUARANTEE
• This product is guaranteed against faulty manufacture for a period of
12 months. Please keep your receipt as proof of purchase.
• This guarantee is invalid if the product is found to have been abused
or tampered with in any way, or not used for the purpose for which it
was intended.
• Faulty goods should be returned to their place of purchase, no
product can be returned to us without prior permission.
• This guarantee does not effect your statutory rights.
SPECIFICATIONS
• Maximum weight load 120 kg
• Dimensions (L x W x H) 1090 mm x 440 mm x (615-1030) mm
• Weight 20 kg
ASSEMBLY
You should have the follows fixings supplied: 8 bolts, 8 nuts, 8 washers and 4
locking knobs, if any of these are missing contact your local Clarke dealer.
1. Position one set of legs as shown
on the right.
CRSL1 Roller Stand Line.PMD 10/12/2008, 08:552
2
ASSEMBLY
2. Secure each set of legs into
position using the nuts, bolts and
washer supplied (4 of each).
3. Repeat with the second set of
legs at the other end of the roller
stand line.
4. Turn the roller stand line up the
right way.
• This unit weighs 20 kg, we
recommend that two people
carry out this step.
ADJUSTING THE HEIGHT
1. Rotate the knobs at the bottom of
each leg anticlockwise until they
are loose.
2. Lift the roller stand line to the
desired height.
• Minimum height is 615 mm
• Maximum height is 1030 mm
3. Rotate the knobs clockwise to
lock the legs into position.
CRSL1 Roller Stand Line.PMD 10/12/2008, 08:553
3
CRSL1 Roller Stand Line.PMD 10/12/2008, 08:554
Loading...