Clarke CPF 300, 6500170 User guide

PLATFORM TRUCK
Model No: CPF300
Part No: 6500170
ASSEMBLY INSTRUCTIONS
GC01/09
INTRODUCTION
Thank you for purchasing this CLARKE platform truck.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
LIST OF CONTENTS
When unpacking, check for damage and /or shortages etc. Any found should be reported to your CLARKE dealer where the product was originally purchased. This Platform Truck should include the following:
1. 1 x Platform
2. 1 x Guard Rail/Handle
3. 2 x Castor Assemblies
4. 2 x Fixed Wheel Assemblies
16 Sets Nuts and Washers
2
ASSEMBLY INSTRUCTIONS
1. Turn the platform face down and bolt on the two castor assemblies to the rear (guard rail / handle end) and the two fixed wheels to the front end.
2. Turn the platform over onto its wheels and insert the guard rail /handle into the holes provided at the castor end of the truck.
Note: The handle portion should be angled away from the platform and can be removed for storage.
3. The platform truck is now ready for use.
GENERAL SAFETY RULES
1. ALWAYS maintain the equipment in good condition for the best/safest performance. NEVER use this product if it is damaged.
2. NEVER exceed the maximum working load of 300 kg.
3. ALWAYS ensure the load is stable and evenly distributed on the platform.
4. NEVER leave the truck on a gradient without securely chocking the wheels/castors.
5. NEVER allow any person to ride on the truck.
6. NEVER use the truck on uneven or loose surfaces.
7. NEVER allow children to use the truck.
8. If necessary, have this product repaired by a qualified person using identical replacement parts. This will ensure that the safety of the product is maintained.
Please keep these instructions in a safe place for future reference.
Do not dispose of this product with general household waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of appropriately.
PARTS & SERVICING
For parts & Servicing, please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: Parts@clarkeinternational.com
SERVICE: Service@clarkeinternational.com
3
Loading...