Clarke COD 70, 7630203 User guide

OIL DRAINER

Model No: COD70

P ART NO: 7630203

ASSEMBLY & OPERATING

INSTRUCTIONS

GC01011

INTRODUCTION

Thank you for purchasing this CLARKE Oil Drainer which is designed to provide
a means of draining vehicle oil quickly and cleanly and transporting it
conveniently so that it may be transferred to a larger storage tank.

This CLARKE product has been designed to give long and trouble free
service. If however, having followed the instructions in this booklet carefully,
you encounter problems, take the unit to your local CLARKE dealer.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for it’s intended purpose.

Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect
your statutory rights.

SPECIFICATION

Capacity ................................................... 70 litres

Weight ....................................................... 35 kg

Working Temperature .............................. -10oC to 60oC

Dimensions (LxWxH) ................................. 580 x 470 x 1570 mm

GENERAL SAFETY PRECAUTIONS

• Ensure the oil drainer is in sound condition before use and has no cracks
which would result in oil leaks.

• When disposing of oil, it must be disposed of according to local laws.
Never ever pour any oil down drains.

• Before draining oil, make sure that the engine is switched off.

• Ensure that the oil drainer is standing on a level surface.

• The oil being drained may still be hot - take care to avoid being burned.

• If oil is spilt, the area must be cleaned completely and sand, sawdust or
industrial absorbant material scattered on the area. You should also alert
other people in the area to the danger of slipping.

• Ensure that the grill is in place inside the oil collecting tank, as this helps to
prevent splashing and avoid spillage when moving the oil drainer around.

2

Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]

PARTS IDENTIFICATION

1. Oil collecting tank

2. Collecting tank tap

3. Extension pipe

4. Bleed valve

5. Compressor connection

6. Pressure gauge

7. Height adjustment lever

8. Safety valve

9. Storage tank

10. Oil level gauge

11. Discharge tap

12. Discharge tube

13. Discharge tap

ASSEMBLY

Connect the handle to the storage tank
and secure into place using the two small
bolts supplied.

3

Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]

METHOD OF USE

DRAINING OIL

1. Make sure that the storage tank is
not under pressure. If it is, open the
tap on the compressor
connection (5) to relieve the
pressure.

2. Position the oil drainer beneath
the vehicle’s oil drain plug.

3. Loosen the height adjustment
lever (7) and raise the oil
collecting tank (1) until it is
approximately 30cm from the
bottom of the vehicle.

4. Open the bleed valve (4) and
collecting tank tap (2).

5. Remove the oil drain plug
on the vehicle and allow
the oil to drain into the oil
collecting tank (1).

EMPTYING THE OIL FROM

THE TANK

1. Replace the oil discharge
plug and the bleed valve
(4).

2. Fit the compressed air tube
onto the compressor
connection (5) and open
the tap.

3. Pressurise the tank to
approx 4 bar (see your
compressor manual).

4. When the tank reaches 4
bar, close the tap on the
compressor connection (5).

5. Turn off the compressor and
remove the compressed air
line from the compressor
connection (5).

4

Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]

6. Place the oil discharge tube (12) into a
used oil drum and open the discharge
tap (11) to empty.

7. When all of the oil is discharged, vent
any air left in the storage tank by
opening the compressor connection
(5).

8. Remove the discharge tube (12) from
the oil drum and secure to the oil
collecting tank (1).

MAINTENANCE

1. Make sure that the pressure gauge (a) is not
damaged.

2. Open tap (b) to clear any solid debris from the
tank.

3. Replace tube (c) if it is no longer transparent.

SERVICE AND REPAIR

If there are any problems with the
operation of your oil drainer
please refer to the
troubleshooting section below.

All servicing or repair must be
carried out by qualified service
technicians.

TROUBLESHOOTING

SMELBORP SESUAC SNOITULOS

dnecedtonseodlioehT

gnitcelloclioehtmorfylkciuq

.)9(knategarotsehtot)1(knat

.)9(knategarotseht

fotuoemoctonseodlioehT

Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]

hwknat

5

.metsysehtnikcolriA.

ehtnieudiserdilossierehT

gnitcurtsboerahci

.epipnoitcartxeeht

)4(evlavdeelbehtnepO

nodetacol)B(patnepO

otknatehtfomottobeht

.eudiserdilosehtegrahcsid

COMPONENT PARTS

No: Description Part No:

1 Quick coupling AP00507002
2 Rigid spout AP50410006
3 Clamp AP00720003
4 Oil discharge hose AP00628007
5 Conical hose connector AP00510003
6 Nut-cap AP00704032
7 Serrated lock washers AP00708002
8 Fixed wheel AP00614006

9 Push-in elbow fitting AP00512004
10 Level indicator tube AP 50628011
11 O-ring 133 AP00610016
12 Drain plug AP00503034
13 Swivelling wheel AP00641012
14 Mini ball valve AP02001019
15 Safety valve AP02002002
16 Mini ball valve AP02001020
17 Gauge AP02003005
18 Tube lock-ring AP51322076

Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]

No: Description Part No:

19 O-ring 147 AP00610042
20 Pipe holder AP50332041
21 Basin supporting tube AP60308001
22 Ball valve AP02001013
23 Oil collecting tank AP08200009
24 Grille AP08200007
25 Drain cock AP00508002
26 Seal ring AP00616010
27 Oil discharge connector AP51322077
28 Adjustable clamping lever AP00618005
29 Hex. Screw AP00704021
31 Washer AP00706034
32 Gauge cover AP00606003
33 Handle with tool tray AP60305001
34 Hexagon head screw AP00702038
35 Oil discharge unit AP53003001
36 Basin supporting unit AP64008002
37 Outlet (set) AP64008003

6

DECLARATION OF CONFORMITY

7

Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]