Clarke CMS 1, 7630198 User guide

MECHANICS MOBILE SEAT

MODEL NO: CMS1

PART NO: 7630198

USER INSTRUCTIONS

GC0415

INTRODUCTION

Thank you for purchasing this CLARKE Mechanics Mobile Seat.

Before attempting to use the product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will ensure
the safety of yourself and that of others around you, and you can also look
forward to the product giving you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.

This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect your
statutory rights.

SAFETY PRECAUTIONS

1. Use your mobile seat for any task where you would normally sit or kneel,
ensuring the floor surface is hard enough that the castors do not sink in.

2. Do not leave the mobile seat where it may be accidentally trodden on.

3. Have any damaged parts repaired or replaced immediately. Use genuine
Clarke parts only. The use of unauthorised parts may be dangerous and will
invalidate the guarantee.

4. Never or climb on, stand on, or attempt to ride on the mobile seat or use it
to transport heavy objects.

UNPACKING & ASSEMBLY

Unpack and lay out all components, checking for any damage which may
have occurred during transit, and ensuring that all parts are accounted for by
checking against the parts list. Should there be any deficiency or damage,
please contact your Clarke dealer immediately. Note that the swivel castors
and base tray are already fitted to the base frame.

2

Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]

1. Attach the side supports (2) to the
base assembly, as shown in the
diagram, with the 12mm bolts
(11), washers (6) and dome nuts
(5). Tighten the dome nuts
securely.

2. Attach the seat cushion (1) to the
side supports, using the 10mm nuts
(4) and washers (3).

Check that all nuts, including those
securing the castors and base frame are tight and secure before using this
seat. Your mobile seat is now ready for use.

COMPONENT PARTS OF THE SEAT

No Description

1 Seat Cushion

2 Side Support

3 Washer (small)

4Nut

5 Domed Nut

6 Washer (large)

7 Castor Retaining Insert

8 Washer (custom)

9 Base Frame

10 Swivel Castor

11 Bolt

12 Plastic Base Tray

When requesting spare parts please
quote SN/CMS1/ 01 to 12.

FEATURE

RATING

Max Capacity 136 kg

Net Weight 4 kg

Dimensions 380 x 360 x 380 mm

3

Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]