
10”
Table Saw
Stand
Model No: CLK3
Part No: 6500713
No.Description Qty Part No.
1 Leg 4 270153000
2 Top Cross Member w/holes 2 270152000
3 Top Cross Member 2 270151000
4 Lower Cross Member 4 270154000
5 Coach Bolt 24 028800004
6 Flat Washer 32 N/A
7 Spring Washer 28 N/A
8 Nut 28 N/A
9 Screw 4 N/A
10 Foot 4 CTS10D10
11 Foot securing nut 4 N/A
Assemble the table in the manner illustrated.
The top cross members with ‘angled’ ends should
be located on top of the square ended cross
members.
Do not tighten any of the nuts until the stand is
fully assembled.
Ensure flat and spring washers are used with all nuts.
When completely assembled, rock the structure
vigorously to ensure it is completely stable before
tighening all nuts.
Bolt the Table Saw to the stand ensuring flat washers
are used at the bolt head and with the nut.
When fully assembled, screw in the feet and adjust
until the table is stable, at this point, tighten the
securinhg nuts