Page 1
WARNING
Compressed air can be
dangerous. Ensure that you are
thoroughly familiar with all
precautions relating to the use
of compressors and
compressed air supply.
Paraffin Gun
Model : 26C
IMPORTANT!
Disconnect the gun from the air
supply, and relieve any pressure
in the gun and hose, before any
disassembly.
Part No : 3090160
OPERATING INSTRUCTIONS
0303
Page 2
Please read these instructions carefully before operating the tool
Thank you for purchasing this CLARKE Paraffin Gun
Before using the device, please read this manual thoroughly and carefully follow all
instructions given. This is for your own safety and that of others around you, and is
also to help you achieve long and trouble free service from your new blow gun.
CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
This guarantee does not affect your statutory rights.
SAFETY PRECAUTIONS
For your personal safety and that of others around you.
Follow these safety instructions carefully.
NOTE :
Products used in this gun may be covered by COSHH regulations
• ALWAYS check manufacturers instructions before spraying.
ALWAYS wear a suitable approved breathing mask, to protect against inhalation
of dust or fumes.
ALWAYS disconnect the gun from the air supply when it is not in use, and before
any disassembly.
NEVER point gun towards people or animals. In the case of injury, seek expert
medical advice immediately.
NEVER allow children to use or play with this or any other tools etc.
Specifications
Air Inlet Connector: ............ ¼”BSP
Minimum Compressor Size: 0.65HP
Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International
reserve the right to change specifications at any time without prior notice.
Loading...