Clarity SEMPREMINI User Manual

User Guide Guide de l’utilisateur

Contents

Product Speciﬁcations 1 Components SempreMini Overview Charging Your SempreMini Getting Started Pairing Your SempreMini with a Bluetooth Pairing Your SempreMini with Two Bluetooth Reconnecting Your SempreMini Using Your SempreMini Troubleshooting Safety Precautions Regulatory/Compliance Statement

Table des matières (section en français)

Regulatory/Compliance Information

- enabled device 4

-enabled devices (Multi-point) 5

E N G L

I S H

Product Speciﬁcations

Bluetooth® Speciﬁcations V4.0 with noise cancellation Backward compatible with v3.0, v2.1, v2.0 & v1.2

Proﬁles Supported Bluetooth® HFP v1.6 wideband speech (HD voice ready), HSP v1.2, A2DP

v1.2, AVRCP v1.4

Operating Distance: 10 meters with no obstructions Operating Temperature: 32F-122F Charging Time*: Around 1.5 hours Talk Time*: Up to 7.5 hours Music Time**: Up to 6.5 hours Standby Time*: Up to 265 hours Battery Type and Capacity: Rechargeable Li-Polymer 200mAh Dimension: 42.5 x 32 x 13.5 mm Weight: 14g

*Varies by mobile phone settings and operator **Music time includes game playing and other media use

E N G L

I S H

Components

Thank you for choosing the Clarity SempreMini Stereo Bluetooth® product. Inside the package, you should ﬁnd:

1 SempreMini main unit 1 USB charger 1 USB cable 1 Stereo headphone (pair) 1 User Guide 1 set each (Large/Small) in-ear cushion 1 lanyard

SempreMini Overview

1. Charging Socket

2. Volume Down

3. Rewind Button

4. Volume Up

5. Fast Foward Button

6. Status Indicator

7. Multi-function Button (MFB)

4 5

8. 3.5mm Stereo Headphone Minijack

9. Clip

Charging Your SempreMini

Before using your SempreMini for the ﬁrst time, please plug the charger into the power source and connect the other end to the charging socket (see page 3) on SempreMini to fully charge the battery.

Status Status Indicator Audio (Earpiece)

1. Charging Red light ON No sound

2. Fully charged Blue light ON No sound

3. Low battery

4. Dead battery OFF No sound

• Use only the supplied charger for charging

• Charging indication will be delayed a few seconds if SempreMini has not been used for a long period of time.

Red light for every 5 seconds A short beep every 20 seconds

E N G L

I S H

Getting Started

Turning Your SempreMini On and O: A. Turning on

Press and hold the Multi Function Button (MFB) until the status indicator ﬂashes blue. For the ﬁrst time (or after Reset), SempreMini will go to the Pairing Mode directly (the LED ﬂashes blue and red).

B. Turning o

Press and hold the MFB until the status indicator ﬂashes red.

Pairing Your SempreMini with a Bluetooth®-enabled device

1. Turn on the Bluetooth® function on your device.

2. Place the SempreMini and your device where they are close to each other.

3. Ensure the SempreMini is OFF.

4. To activate the SempreMini’s pairing mode, press and hold the MFB until the status indicator ﬂashes blue and red alternately.

5. Search for Bluetooth devices in your Bluetooth settings menu on your device, select “SempreMini” and enter the passcode “0000”. If your device supports “Simple Pairing” function, no code is required.

6. When pairing is complete, the SempreMini’s status indicator will ﬂash blue.

Pairing SempreMini with two Bluetooth®-enabled devices (Multi-point)

SempreMini supports a multi-point function to allow simultaneous pairing with two devices.

1. Pair SempreMini with the ﬁrst device (follow the steps in “Pairing Your SepreMini with a

Bluetooth-enabled device”).

2. Turn o SempreMini and the Bluetooth® function of the ﬁrst paired device.

3. Pair SempreMini with the second device (follow the steps in “Pairing Your SempreMini with a Bluetooth-enabled device”).

4. Activate the Bluetooth connection between SempreMini and the ﬁrst paired device on that device’s menu. Alternately, turn SempreMini o and then back on - it will connect to the two devices automatically.

• For some devices, you may need to manually select “connect” to connect SempreMini.

• If the pairing cannot be completed within two minutes, SempreMini will auto-matically go

to standby mode and then turn o after ﬁve minutes. Repeat steps to pair both devices again.

Reconnecting Your SempreMini

1. If SempreMini has been turned o, it will reconnect to the phone automatically after turning it on; if not, press reconnect on the phone.

2. If the phone has been powered o and SempreMini is then disconnected, reconnect it via the phone’s menu when the phone is on again. Or, turn SempreMini o and then back on.

E N G L

I S H

Using Your SempreMini

1. Answer/End Calls Press MFB once; blue light ﬂashes every 5 seconds during the call.

2. Adjust volume Press the Volume up or Volume down to increase/decrease the volume. There are 8 volume

steps.

3. Missed Call Notiﬁcation Blue/red light ﬂahses twice every 3 seconds. To release the Missed Call notiﬁcation, press the Fast Forward button once.

4. Voice dialing Press and hold MFB unti you hear a short beep, then say the voice tag. The voice tag needs to be recorded on our mobile phone. If you have two mobile phones connected, this feature works on only the ﬁrst connected phone.

5. Call transfer between mobile phone and headset (either direction) Press MFB twice during the active call; you will hear a beep to indicate call transfer.

6. Out of range alert Blue light ﬂashes once every 10 seconds for the ﬁrst minute, then ﬂashes twice every 3

seconds. SempreMini automatically reconnects when back in range; if not, press MFB once to reconnect. If out of range for more than 6 minutes, SempreMini will turn intself o to conserve battery.

7. Standby mode, mobile phone connection active Blue light ﬂashes every 10 seconds.

8. Play/Pause music During playback, press MFB once.

9. Skip Forward/Skip Previous music During playback, press Fast Forward or Rewind button once.

10. Reset/Remove paired mobile phone history Press and hold MFB and Volume Up buttons until you hear a beep; red light ﬂashes once to indicate removal of mobile phones from headset memory.

• Please use the mobile phone for MUTE/HOLD/REJECT and other functions. For a complete list of features, visit www.clarityproducts.com

• SempreMini is designed to work with mobile phones and Bluetooth-enabled devices with Bluetooth Handsfree proﬁle; the compatibility of some features is not guaranteed for all devices.

E N G L

I S H

+ 25 hidden pages