Clare Instruments Seaward Group USA SS200R User Manual

Read these operating instructions before using this
instrument.

This equipment should only be used by suitably trained
personnel.

The Solar Survey is intended for use in a dry environment
only.

Check the Solar Survey PV100 and all associated cables and
leads before operating the equipment. Do not use if there are
signs of damage.

Only use the connecting leads & temperature probes supplied
with the Solar Survey.

Use 2x 1.5V AA Cells - these may be Alkaline or rechargeable
NiCd or NiMH.

FCC
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following 2 conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Caution: Changes or modifications to the Solar Survey 200R
not expressly approved by Seaward could void your authority
to operate it.

396A558 rev C June 2012

Temperature

Alkaline Cells

Probe Socket

PV Sensor

Multi-mode LCD

Function Keys

(Survey 200 only)

Battery Holder on
Back of Case
2 x AA, 1.5V

Overview

Link Socket to Other

Solar Products

S E A W A R D

W

2

823

+

m

43

272

OK

HOLD

ON/OFF

SOLAR

LOG

SURVEY200

USB Socket

(Survey 200 only)

'HOLD' Indicator

Press 'HOLD' to freeze
values on display

Press again to
un-freeze display

Optical Sighting Marks

Press to turn power on/off

ON/OFF

Meter always powers up in ANGLE Mode

Power will turn off automatically if no key
is pressed for 120s