Clare Controls ZW080 User manual

Manufactured for Clare Controls by Aeotec Limited
(#704, Bright Way Tower, 33 Mong Kok Rd, Mong
Kok, Hong Kong) contactable via aeotec.com/con­tact. The importer and/ or distributor of this device
can both be reached separately with the company
from whom you have purchased this device from
responsible for warranty, technical support, and
compliance related queries.

Disposal guidelines and WEEE.

Clare Controls devices may contain batteries;
remove when not in use. Do not dispose of device
as unsorted municipal waste, use separate
collection facilities. Contact your local government
for further information.

One-Year Limited Warranty.

Clare Controls warrants included Clare Controls
branded hardware device when purchased new and
delivered in new condition and in its original
container against defects in materials and
workmanship for one year from the date of original
purchase from an authorized reseller when
purchased and used in the region of original export.
In line with the terms of sales between Clare
Controls and the authorized importer/ reseller of this
device, any claims against the foregoing warranty
are to be handled by the authorized distributor/
reseller directly. The foregoing warranty is subject to
the proper installation, operation, and maintenance

ZW080

Used in this guide.

Note:

QR Code used for SmartStart inclusion.
DSK Code can be found on packaging. Do not
remove or damage them.

105dB
speaker

ClareOne Z-Wave Siren
P/N: CLR-C1-ZW-SRN

PIN: 12345PIN: 12345

Model: ZW080-A17
Ratings: 120V~, 60Hz,
Max: 30mA
FCC ID: XBAZW080
Assembled in China

CONFORMS TO UL STD.60950-1

CONFORMS TO UL STD.60950-1
CERTIFIED TO CSA STD.

CERTIFIED TO CSA STD.
C22.2 NO.60950-1-07

C22.2 NO.60950-1-07

Important safety information.

Please read this and the online guide(s) at

https://www.clarecontrols.com/helpcenter

follow the recommendations set forth by Clare Controls
may be dangerous or cause a violation of the law. The
manufacturer, importer, distributor, and/or re seller will
not be held responsible for any loss or damage
resulting from not following any instructions in this guide
or in other materials.

Warning:

damage, test only when wearing appropriate
hearing protection.

system

Network
LED

Action Button

. Failure to

To prevent possible hearing

Safety LED

ClareOne Siren is intended for indoor use in dry
locations only. Do not use in damp, moist, and/or wet
locations.

Quick start.

The following will step you through installing the
ClareOne Siren and connecting it to your ClareOne

TM

Z-Wave

network.

1. Plug ClareOne Siren into a power outlet; its
Network LED will slow flash.

2. To connect ClareOne Siren to your automation
network;
a. If your Z-Wave gateway supports

SmartStart, scan ClareOne Siren's QR
Code using your gateway's app. Once
scanned, ClareOne Siren will join your
Z-Wave network automatically within 10
minutes.

b. Else, set your gateway into its 'add device'

mode. Refer to its manual if you are unsure
of how to perform this step.

c. Then press ClareOne Siren's Action Button

once; its Network LED will flash quickly to
indicate pair mode.

d. If your gateway supports S2 security, and

you want your device to use this higher
level of security, please enter the first 5
digits of the DSK into the gateway's

interface when prompted. Refer to the
gateway's manual if you are unsure how to
perform this step. Do not lose the DSK or
remove it from the product or package.

3. When ClareOne Siren successfully joins your
Z-Wave network, its Network LED will become
a solid ON state for a few seconds and then
OFF. Should its Network LED still slow flash 3
times and then OFF, this indicates it was
unable to join your Z-Wave network; repeat the
above steps and please contact us for further
support if needed.

ClareOne Siren is now a part of the ClareOne
Z-Wave network.

You are able to test the ClareOne Siren's speaker

Safety:

system manually.

Test only when wearing
necessary ear protection. ClareOne Siren's speaker
emits tones up to 105dB that can cause hearing
damage. To test manually, press and hold Action
Button for 5 seconds.

Get help & learn more.

Should you encounter any problem with the
ClareOne Siren visit
www.clarecontrols.com/helpcenter or contact our
support team at [e-mail].

of the device in accordance with installation
instructions and the operating manual supplied to
customer and further documentation made available
digitally. Liquid damage, including, but not limited to,
internal liquid damage caused by improper use,
closure or affixing of the hardware, is not covered by
this warranty. Splash, water, and dust resistance are
not permanent conditions and resistance might
decrease as a result of normal wear. Not warranted
for damage from open flames and heat, and
exposure to sun. Not warranted for battery leak
damage; always remove all batteries from products
that not being used. Clare Controls does not warrant
against normal wear and tear, nor damage caused
by accident or abuse. Please be sure to read this
device's support notes, digital materials, and quick
start guide fully. Subject to the full terms of obtaining
service within 30 days of the manifestation of a
problem, if you submit a valid claim under this
warranty, Clare Controls shall provide further
information in obtaining warranty services from the
authorized importer and / or seller of this device.

FCC Notice.

The edition of this device made and certified for the
US market and marked as such complies with part
15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not
cause harmful interference, and (2) this device must
accept any interference received, including

interference that maycause undesired operation. The
manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to
this equipment. Such modifications could void the
user's authority to operate the equipment. This
equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part
15 of the FCC Rules These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the
equipment into an outlet on a circuit different from
that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for
help (5) Ensure this device and its antenna(s) are not
be co-located or operating in conjunction with any
other antenna or transmitter.

RF Exposure Statement.

The device has been evaluated to meet FCC/CE
general RF exposure requirement. The device can be
used without restriction

California Proposition 65.

WARNING: This product contains a chemical known
to the State of California to cause birth defects or
other reproductive harm. Use only for intended
purposes. Do not use for other purposes including,
but not limited to, the consumption of food and drinks

Declaration of Conformity.

Aeotec Limited declares that ClareOne Siren is in
compliance with the essential requirements and other
relevant provisions of RED 2014/53/EU, RoHS
2011/65/EU, IEC 62321:2008, EN 50581:2012 and
ErP Directive 2009/125/EC, No 1275/'2008
AMENDMENT 801/2013

Specifications.

Z-Wave devices operate between 868.40 & 926.3
MHz depending on local restrictions. It uses up to

1.15 dBm of transmit power, enabling long range
connectivity. Full information on device specifications
and certifications at
www.clarecontrols.com/helpcenter.

FCC ID: XBAZW080

Clare Controls
While the information in this guide has been
compiled with care, it may not be deemed an
assurance of device characteristics. All information,
including, but not limited to, information regarding the
functionality, features, and / or device specifications
are subject to change. Clare Controls reserves all
rights to revise or update its products or documenta­tion without any obligation to notify any individual or
entity. Clare Controls shall be liable only to the
degree specified in the terms of sale and delivery.

Clare Controls

[e-mail]

www.clarecontrols.com/helpcenter