Clam Adventure 8984 User Manual

Model No.

- 8984 -

p/n 108984

S p e c i f ica t i o n s

H e i g h t - 7 4 ” ( 2 3 ” p a c k e d )

▪

Width - 7 3 ”

▪

Depth - 1 5 5 ” ( 48” p a c k e d )

▪

W e i g h t – 1 45 l b s .

▪

Instructions – 103757

▪

* * * * * * W a r r a n t y I n f o r m a t i o n * * * * * *

NOTICE!!! Once used, this shelter cannot be returned to the store.

** Warranty cannot be honored without an original, dated receipt **

IMPORTANT - PLEASE READ:

This product is warranted to the original retail purchaser (from an authorized dealer) and is non-transferable. Clam
Corporation has a one year manufacturer’s defect warranty from the date of original purchase. Warranty does not cover
cracked or worn bases (if runner kits have not been installed as recommended), cracked windows, tent tears or cuts, or
broken or bent hoops due to high wind weather conditions or unattended use. Defective parts will be replaced or repaired
(at the manufacturer’s option) if found to be defective within one (1) year from the date of original purchase. Warranty will
be void if product has been subject to neglect, misuse, improper installation, misapplication, alteration, accident including

but not limited to improper maintenance, or use of unauthorized parts or attachments. Please read the entire owner’s

manual to ensure proper installation, use, storage and care of your Clam Shelter.

To submit a warranty claim request, please use one of the following methods:

•

Email: [e-mail] (Preferred Method)

•

Fax: [phone]

•

Write: Customer Service – Warranty Department

600 Clydesdale Trail
Medina, MN 55340

In your request, please include your full name, address, phone number, a copy of your receipt, a brief description of the
problem, and pictures to clearly show the area(s) of concern. Our Warranty Department will review your request, and a
Clam representative will contact you regarding your claim status. All returns must be shipped to us postage pre-prepaid. A
customer service representative can be reached at 763-231-4120.

- L i m i t a t i o n o f L i a b i l i t y -

It is expressly understood that Clam Corporation’s liability for its products, whether due to breach of warranty,

negligence, strict liability, or otherwise, is limited to the repair of the product as stated above. Clam Corporation is not
liable for any injury, loss, damage, or expense, whether direct or consequential, including but not limited to loss of use,
income, profit, or damage to material arising in connection with the sale, installation, use of, inability to use, or the
repair or replacement of Clam Corporation products. Clam Corporation reserves the right to make alterations or
modifications in its products at any time, which in its opinion, may improve the performance and efficiency of the
product. Clam shall not be obligated to make such alterations or modifications to products already in service.

2

ITEM NO.

PART NUMBER

DESCRIPTION

QTY. 1 103394

BASE, ADVENTURE

1 2 103595

HOOP POLES

6 3 102759

DELUXE SEAT

2 4 101399

SEAT SWIVEL

4 5 103592

STRAP, HAMMOCK

4 6 103395

TENT, ADVENTURE

1 7 101249

ROPE, 3/8 DIA X 11 FT TOW

1 8 103605

HOOP POLE COLLAR

12 9 103607

SPREADER POLE COLLAR

5

10

103590

SEAT RAILS

2

11

103582

SEAT LEG ASM.

4

12

103597

BENT HOOP SUPPORT POLE

4

13

101900

RIGHT HOOP BRACKET

2

14

101901

LEFT HOOP BRACKET

2

15

103599

STRAIGHT HOOP POLE

8

16

103656

FRONT & REAR ADJ. SPREADER POLE

2

17

101081

WASHER, 1/4 FLAT REG

48

18

101082

NUT, 1/4-20 THIN NYLOCK

48

19

103658

ROOF SPREADER POLE

3

20

101088

SCREW, 1/4-20 X 0.75

34

21

101906

SCREW, 1/4-20 X 2.50

14

22

101470

SCREW, 1/4-20 X 0.50

18

23

103618

PLASTIC SLIDE BLOCK

16

24

103619

SLIDE BLOCK BOTTOM

4

25

103122

SCREW, #14 X 5/8”

56

26

101536

SCREW, HI-LOW WITH .448” HEAD

8

27

101034

SCREW, #10 X 3/4"

7

28

102775

SLIP COVER, BOTTOM

2

29

103638

SLIP COVER, BACK

2

30

103757

INSTRUCTION, ADVENTURE

1

31

103712

CONSOLE, ADVENTURE

2

32

102795

CUP HOLDER

4

33

103653

SMALL SEAT ASM.

2

34

108819

LARGE ORGANIZER

1

35

109222

TOOL KIT

1

- P a r t s L i s t -

3

PARTS

4

STEP 1

Install pole mount brackets,
PN 101900 and 101901.

STEP 2

Install leg assemblies PN

103584.

5

STEP 3

Mount the hammocks, PN 103593 to the
leg assemblies using the hammock
straps, PN 103592.

Mount the console, PN
103653, to the small
seat assembly, PN
103653 using the wood
screws, PN 101536.
Align the console to the
seat so it is straight and
the cup holders can be
installed. See next
illustration.

STEP 4