Clam 2000 8200 Service Information
Model No.
- 8200 -
p/n 108329
Set-Up
Height: 64 inches
▪
Depth: 72 inches
▪
Width: 48 inches
▪
Collapsed
Height: 6 inches
▪
Length: 36 inches
▪
Width: 48 inches
▪
Weight: 45lbs
▪
- Clam Customer Service Information -
NOTICE!!
Warranty Claim, have your sales receipt ready and contact Clam Corporation
Customer Service by email inquiry or direct by calling:
Customer Service Hrs: - 9am to 4pm, Mon. - Fri. Central Standard Time
▪
Clam Corporation
▪
600 Clydesdale Trail
Medina, MN 55340
Phone - 763-231-4120
▪
Once used, this shelter cannot be returned to the store. If you have a
Fax - 763-231-4121
▪
Website – www.clamcorp.com
▪
Email – customerservice@clamcorp.com
▪
Clam Corporation cannot honor warranty without an original, dated receipt.
- Set-Up Instructions -
Unfold the unit and unzip the doors at both ends. Locate and remove the folded Flexible Rods
▪
and Latch Clips from the unit.
Through the doorway of one end, grasp the center of the nearest Hoop Tube and pivot it
▪
upwards towards you into a vertical position. Next pull the same Hoop Tube straight up, sliding
it until the holes near the ends are engaged by the Spring Buttons of the Canopy Poles. Lay the
erected Hoop Tube down onto the unit.
Go around to the opposite doorway and erect the other Hoop Tube in the same fashion. Lay both
▪
erected Hoop Tubes agains t one another.
102865 Tent (not shown)
101682 Flexible Rod
102191 Hoop Tube
101168 Latch Clip
101152 Canopy Pole
Spring Button
101150 Hole Cover
101116 Molding
2
Loading...