Clam 8842, 108842, PRO TC Instructions Manual

Model No.

- 8842 -

p/n 108842

S p e c i f i c a t i o n s

H e i g h t - 60” (22” packed)

▪

Width - 45”

▪

Depth - 80” (36” packed)

▪

W e i g h t – 52 lbs.

▪

Instructions – 103500

▪

******Warranty Claim Information******

NOTICE!!! Once used, this s h e l t er cannot be returned to the stor e.

** Warranty cannot be honored without an original, dated receipt **



Customer Service Hrs: 9am to 4pm, Monday – Friday Central Standard Time

 Phone: [phone]
 Fax: [phone]
 Email: [e-mail]

IMPORTANT - PLEASE READ:
This product is warranted to the original retail purchaser (from an authorized dealer) and is non-transferable. Clam

Corporation has a one year manufacturer’s defect warranty from the date of original purchase. Warranty does not cover
cracked or worn bases (if runner kits have not been installed as recommended), cracked windows, tent tears or cuts, or
broken or bent hoops due to high wind weather conditions or unattended use. Defective parts will be replaced or repaired
(at the manufacturer’s option) if found to be defective within one (1) year from the date of original purchase. Warranty will
be void if product has been subject to neglect, misuse, improper installation, misapplication, alteration, accident including
but not limited to improper maintenance, or use of unauthorized parts or attachments. Please read the entire owner’s
manual to ensure proper installation, use, storage and care of your Clam Shelter.

To submit a warranty claim request, please use one of the following methods:

•

Email: [e-mail] (Preferred Method)

•

Fax: [phone]

•

Write: Customer Serv ice – Warranty Department

600 Clydesdale Trail
Medina, MN 55340

In your request, please include your full name, address, phone number, a copy of your receipt, a brief description of the
problem, and pictures to clearly show the area(s) of concern. Our Warranty Department will review your request, and a
Clam representative will contact you regarding your claim status. All returns must be shipped to us po stage pre-prepaid.

- Limitation of Liability -

It is expressly understood that Clam Corporation’s liability for its products, whether due to breach of warranty,
negligence, strict liability, or otherwis e, is limited to the repai r of the product as stated above. Clam C orporation is not
liable for any injury, loss, damage, or e xpens e, whet her d irect or consequent ial, including but not limited to loss of us e,
income, profit, or damage to materia l arising in connection with the sale, installation, use of, inability to use, or the
repair or replacement of Clam Corporation products. Clam Corporation reserves the right to make alterations or
modifications in its products at any time, which in its opinion, may improve the performance and efficiency of the
product. Clam shall not be obligated to make such alterations or modifications to products already in service.

- Parts List -

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 103053 BASE, PRO TC 1
2 103080 CANOPY HOOP POLE 3
3 103081 PORCH HOOP POLE 1
4 101083 TUBE SPACER CAP 8
5 101080 SCREW, 1/4"-20 X 1.25" 8
6 101081 WASHER, 1/4 FLAT 14
7 101082 NUT, 1/4"-20 THIN NYLOCK 22
8 101088 SCREW, 1/4"-20 X 0.75" 8

9 101486 SCREW, 1/4"-20 X 1.75" 6
10 101470 SCREW, 1/4"-20 X 0.50" 4
11 103122 SCREW, #14 X 5/8" 12

12 103040

103020 SPRING PLUNGER ASM. 2
13 103055 FOLDING SEAT BRACKET 1
14 102715 1" SQUARE TUBE PLUG 6
15 103026 UPRIGHT SHORT TUBE LEG 1
16 101042 RIGHT MOUNT BRACKET 1
17 101043 LEFT MOUNT BRACKET 1

18 103046
19 103119 PLASTIC SEAT SLIDER 2

20 103120 SEAT SLIDER BOTTOM 1
21 103037 FRONT SEAT MOUNT TUBE 1
22 103147 ½” EZ GLIDE PORCH SUPPORT POLE 2
23 102759 DELUXE SEAT 1
24 101399 SEAT SWIVEL 1
25 102650 RPS CLIP, 7/8" 8
26 103102 1/2" EZ GLIDE SIDE SUPPORT POLE 6
27 103383 TENT, PRO TC 1
28 101095 ROPE, 3/8 DIA X 9 FT TOW 1
29 101074 REAR ADJUSTABLE SPREADER POLE 1
30 102775 SLIP COVER, BOTTOM 1
31 102776 SLIP COVER, BACK 1
32 102814 MOLDING, V-CHANNEL 1
33 101148 SCREW, #6 X 0.38" 16
34 103500 INSTRUCTION, PRO TC 1

FOLDING SEAT BRACKET W/SPRING

PLUNGER

FRONT SLIDE BRACKET W/SPRING

PLUNGER

1

1

2

3

Install both right and left mount brackets (items
16 & 17) to the base (item 1).

Install front seat mount tube (item 21).

4

5

Bracket with spring plunger
mounts on this side.

Assemble seat mount brackets.