C-KO C-KO-DVBT-180-Plus User Manual

User's manual

MFN

TM

Frep uency

Swit ch

Auto matic

1.Front Panel

Ant. In(1)

Rear Display( 2)

Front Display (2)

Audio Out R/L(3 )

Power(4)

(1) Ant. In: Antenna connection port (NOTE: This unit provides +5V antenna power on these inputs for 5V
active antennas)
(2) VIDEO OUT: Output ports for connection to car monitors. Connect the video output "FRONT and
REAR"with the video inputs of your monitors. The video output "FRONT"can be controlled by the
vehicles handbrake fo avoid danger.
(3) AUDIO OUT R/L: Audio R/L which can be connected to a head unit with stereo amplifier inputs (if
supported).
(4) POWER: Wiring Connection Input harness. The power input is supported either 12V or24V car power
system.

connect the red ACC cable to the
accessories cable of your vehicles

Use the blue +12V output cable to
power your active antennas. If your
active antenna could support the
5V power through RF ,input don’t
need to connect this +12V cable

connect the yellow BAT+ cable
with the (+) pole of battery

connect both black GND cable to
the vehicles chassis ground

AV INPUT

IR
USB

IR. In(5) AV Input( 7)USB Port(6)

(5) IR. In: Port for connecting the infrared receiver module.(must be connected)
(6) USB Port: For reading USB memory stick.(Max.8GB)
(7) AV Input: Audio/video signal input for external devices such as DVD ,GPS.

2.Remote Help

1.ON /OFF-Tu rn the TV tuner ON/OFF.

2.Mute-Mute t he audio ou tput.

3.Numeric key (0~9) or ch annel numbers.

4.Vol.+/--ad just the vo lume.

5.CH.+/--Changes to the next /previous channel.

6.Increases /decrea ses the volume level in no-menu
mode. Moves the c ursor in menu mode.

7.Up/Down-C hanges th e current channel to the
next /previou s channel i n no-menu mode. Moves the
cursor up/dow nwards in m enu mode.

8.OK-Calls si mple chan nel list in no-menu mode.
Activates the hi ghlight ed menu item in menu mode.

9.Exit-Exits from the menu or sub-menu and cancel any
functions.

10.Menu-Shows the main menu.

11.F1-A.In Channel Edit menu, set favourite program.

B. TV program is playing ,press F1, program
description appears.

12.F2-A.In Channel Edit menu ,press F2 to lock the

menu(parental lock).
B .TV program is playing, press F2, Audio language
appears.

13 F3-A.In Channel Edit menu ,press F3 to rename the
channels.

B. TV program is playing, press F3, adjust display
format4:3/16:9.

14 F4-A .In Channel Edit menu ,press F4,to delete the
channels.

B. TV program is playing, press F4 button , auto
terrestrial total scan.

15. EPG- Electronic Program Guide.

16. Fav-Press the Fav button to view the favourite programs.

17.Info-TV program is playing, press the Info button once ,the
info bar at thebottom of screen appears. Press the Info
button twice, the related channel parameters information
appears.

18.TV/Radio:switches between TV and radio channels.

19. Prev. CH: switches between TV/AV-in

20. Sub: Sub function.

21. Text: Teletext function.

1

3

5

7

7

10

12

13

16

18

19

6

4

6

8

9

11

15

14

17

20 21

2

Note: Please set the type of an tenna used correctly as shown in 4. 3.3: active antenna On/OFF, if this

setting is done w rongly the unit will not work prope rly.