CK CK420 User Manual

200W

200W Beam

Beam

Beam Light

Light

I

I tem

tem

tem N

N

N o

o

o ：

：

： CK

CK

CK 420

420

USER

USER MANUAL

MANUAL

KEEP

KEEP THIS

THIS

THIS MANUAL

MANUAL

MANUAL FOR

FOR

FOR FUTURE

FUTURE

FUTURE NEEDS

NEEDS

ww

ww w.cklight.com.cn

w.cklight.com.cn

Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your own safety, please read this user manual carefully before installing the device.

In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and operation should be done by the verified technician and follow the instruction Strictly.

Every person involved with the installation, operation and maintenance of this device has to:

-be qualified

-follow carefully the instructions of this manual

INTRODUCTION:

Thank you for having chosen this professional moving head.

You will see you have acquired a powerful and versatile device.

Unpack the device. Inside the box you should find:

1. One DMX Cable

2. Two omega clamps

3 . User Manual

Please check carefully that there is no damage caused by transportation. Should there be any, consult your dealer and don ’ t install this device.

Features

Features :

:

• La mp: Philips MSD Platinum 5R , YODN 5R or Jenbo NSK 5R Titanium .

• Color temperature: 8000K

• Channel : 16 DMX Channel s

• Pan scan ： 540 ° (16bit) Electric correction

• Tilt scan ： 270 ° (16bit) Electric correction

• Amazing dot matrix ,four tact switch, 180 ° tunning show

• Color wheel: one color wheel, 14 kinds of color chips in one color wheel

• Gobo: 17 gobos

• Effect Wheel:Rotatable eight prism,effect move , frost

• 0-100% mechanical dimming, mechanical dimming and free dimming

available.

• strobe macro control available.

• Lens optical system mechanical focus .beam angle 0 ～ 4 °

• Over heat protection

• Power: 100-240V

，

50/60Hz

• Consume power

：

350W

• IP level :IP20

• Magnetic ballast and AC/Dc power supply

• Product Size

：

523 × 337 × 511mm

• Packing Size: 635X440X725 mm

• Net Weight

：

1 8.6 KG

This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.

If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising condensation could damage the device. Leave the device switched off until it has reached room temperature.

This device falls under protection-class I. Therefore it is essential that the device be earthed.

The electric connection must carry out by qualified person.Make sure that the available voltage is not higher than stated at the end of this manual.

Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by the plug. Never pull out the plug by tugging the power cord. During initial start-up some smoke or smell may arise. This is a normal process

CK CK420 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual