C&K Y Series
M
Switchlock
4, 5 & 6 Tumbler Switchlocks
Features/Benefits
• Anti-static switch—exceeds
20 KV DCstatic resistance
• Momentary models available
T
ypical Applications
• Point-of-sale terminals
• Cash registers
• Computers
• Wire leads and harnesses available
Models Available
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page M-9 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º or 90º, 2-4 positions (4&5 tumbler switchlocks).
45º, 3 positions; or 90º, 2 positions (6 tumbler tubular
switchlocks).
Other functions available, consult Customer Service Center.
STATIC RESISTANCE: Anti-static models exceed 20 KV DC static
resistance @ sea level, lock body to terminals.
MOUNTING TORQUE: 10 in./lbs.; 14 in./lbs max.
Patent No. 4,639,562
Materials
LOCK: Zinc alloy with stainless steel facing, std. (4 & 5 tumbler lock
and 6 tumbler tubular lock).
KEYS: Two nickel plated brass keys, with code number, std.
(4 and 5 tumbler lock). Two die cast chrome plated zinc alloy
keys,std. (6 tumbler lock).
SWITCH HOUSING: Glass filled polyester (UL 94V-0).
CONTACTS AND TERMINALS: Q contact material: Copper, silver
plated. See page M-9 for additional contact materials.
MOUNTING NUT: Zinc alloy.
MOUNTING CLIP: Steel, zinc plated.
DRESS NUT: Brass, nickel plated.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages M–4 through M–10. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
Y10013 SP, 45°, keypull pos. 1
Y1011U SP
Y1001U SP, 40°, keypull pos. 1 & 3
Y2001U DP
Y10082 SP
Y20082 DP
Y100AA SP, 40°, keypull pos. 1, 2 & 3
Y200AA DP, 40°, keypull pos. 1, 2 & 3
Y100AB SP, 40°, keypull pos. 1, 2, 3 & 4
Y200AB DP, 40°, keypull pos. 1, 2, 3 & 4
Y10113 SP
Y20113 DP, 90°, keypull pos. 1
Y1011C SP
Y2011C DP, 90°, keypull pos. 2
Y2011U DP
Y14173 SP, 90°, keypull pos. 1
Y1417U SP, 90°, keypull pos. 1,2 & 3
Y10812 SP, 40°, mom., keypull pos. 1
Y20812 DP, 45°, mom., keypull pos. 1
Y19073 SP w/common,
Y1907U SP w/common, 90°, keypull pos. 1, 2 & 3
Y1900S SP w/common,
°, keypull pos. 1 & 2
90
,
40°, keypull pos. 1 & 3
,
, 40°, keypull pos. 1
, 40°, keypull pos. 1
, keypull pos. 1
°
90
,
, 90°, keypull pos.2
, 90°, keypull pos. 1 & 2
, keypull pos. 1
°
90
90°, keypull pos. 1, 2, 3 & 4
Keying
wo nickel pla
2 T
5 tumbler) or two die cast zinc alloy keys with
chrome pla
wo nickel plated brass keys with code on lock face
6 T
Lock T
A 4
Tumbler lock (YXO8 models)
C 4 Tumbler lock with detent
V 6 Tumbler tubular lock
B 5 Tumbler lock
R 4 Tumbler lock with detent and anti-Static switch
umbler tubular lock with anti-Sta
T
W 6
Lock Finish
2 Stainless steel facing
8 Gloss black facing
F Polished nickel facing
ting (6 tumbler)
ype
ted brass keys (4 &
witch
tic s
Terminations
03 Solder lug with hole
01 Solder lug with notch
02 PC
07 Solder lug with hole
WC Wire lead
Mounting/Lock Style
N With nut
D With clip
L With removable dress nut and latch pawl
R With removable dress nut
Thru-hole
(Y19OXX models only)
Contact Material
Q Silver
B Gold
G Gold over silver
Seal
NONE No seal
E Epoxy seal
M–3
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www
.ittcannon.com
M
Switchlock
C&K Y Series
= Momentary Positions (45º)
= Detent Positions (45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
TERMINAL NUMBERS
POS.
1
2
3
POS. 1
2
POS. 1
2
3
2
3
POS. 1
POS. 1
23
POS.
1
23
POS. 1
2
3
4
2
POS.
1
POS.
1
2
POS. 1
2
POS. 1
2
3
4, 5 & 6 Tumbler Switchlocks
SWITCH AND LOCK FUNCTION
SINGLE & DOUBLE POLE SWITCHES
CONNECTED TERMINALS
NO.
TUMBLERS
NO.
POLES
MODEL
NO.
POS. 1 POS. 2 POS. 3 POS. 4
KEY PULL
POSITIONS
LOCK
CONFIGURATION
INDEXING
4, 5 & 6
4 & 5
4
4
4, 5 & 6
4 & 5
4, 5 & 6
SP4, 5 & 6
SP
DP
SP
DP
SP
DP
SP
DP
SP
DP
SP
DP
SP
DP
SP4
Y10013
Y1001U
Y2001U
Y10082
Y20082
Y100AA
Y200AA
Y100AB
Y200AB
Y10113
Y20113
Y1011C
Y2011C
Y1011U
Y2011U
Y14173
8-1
8-1, 4-5
8-1
8-1, 4-5
8-1
8-1, 4-5
8-1
8-1, 4-5
8-1
8-1, 4-5
8-1
8-1, 4-5
8-1
8-1, 4-5
1-2
1-2, 5-6
1-2
1-2, 5-6
1-2
1-2, 5-6
1-2
1-2, 5-6
1-3
1-3, 5-7
1-3
1-3, 5-7
1-3
1-3, 5-7
2-3
2-3, 6-7
7-8
7-8, 3-4
7-8
7-8, 3-4
2-3
2-3, 6-7
3-4
3-4, 7-8
Position 12-31-28-1
Positions 1 & 3
Position 1
Positions 1, 2 & 3
Positions 1, 2, 3 & 4
Position 1
Position 2
Positions 1 & 2
Position 16-71-37-1
45º
90º
NO.
TUMBLERS
4
SP4
NO.
POLES
SP
DP
Y1417U
MODEL
NO.
Y10812
Y20812
SINGLE & DOUBLE POLE MOMENTARY SWITCHES
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3 POS. 4
8-1
8-1, 4-5
1-2
1-2, 5-6
M–4
Positions 1, 2 & 36-71-37-1
KEY PULL
POSITIONS
Position 1
erminal numbers molded on bottom of housing.
T
All models with all options when ordered
with ‘G’ or ‘Q’ contact material.
Specifications and dimensions subject to change
LOCK
CONFIGURATION
Dimensions are shown: Inch (mm)
www
.ittcannon.com
INDEXING
45º
Mom.
M
Switchlock
SLOTS IN THIS
LOCATION FOR MOUNTING
STYLE 'D' CLIP
SLOTS IN THIS
LOCATION FOR MOUNTING
STYLE 'D' CLIP
= Detent Positions (45º or 90º)
= Key pull possible in these positions.
= Stop Positions
LEGEND
TERMINAL NUMBERS
NO.
POS. 1
23
POS. 1
23
POS. 1
24
3
TUMBLERS
NO.
POLES
SWITCH AND LOCK FUNCTION
SINGLE POLE SWITCHES WITH COMMON
CONNECTED TERMINALS
MODEL
NO.
POS. 1 POS. 2 POS. 3 POS. 4
C&K Y Series
4, 5 & 6 Tumbler Switchlocks
KEY PULL
POSITIONS
LOCK
CONFIGURATION
INDEXING
Y19073
C-4C-2C-1
Y1907U
4 SP 90º
Y1900S
Position 1
Positions 1, 2 & 3
Positions 1, 2, 3 & 4C-4C-3C-2C-1
Terminal numbers marked on insulator.
All models with all options when ordered
with ‘G’ or ‘Q’ contact material.
NOTE: Epoxy seal not available. Removable dress
nut not available with any Y190XX models.
4 & 5 Tumbler
6 Tumbler
Part number shown: Y100132C203NQ
Part number shown: Y1011U2V203NQ
M–5
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www
.ittcannon.com
M
Switchlock
C&K Y Series
.
AVAILABLE OPTION COMBINATIONS
LOCK TYPES TERMINATIONS
MOUNTING/LOCK
STYLES
MODELS
A
B C R V W 01 02 03 07 WC D L N R
YX0013
•• ••••• •• ••
YX001U
•••••••• •••••
YX0082
••• ••• •• •
YX00AX
•• ••• •• ••
YX0113
•••••••• •• ••
YX011C
••• ••• •• ••
YX01IU
•••••••• •••••
Y141XX
•• ••• •• ••
YX0812
••••••••
Y190XX
•• • ••• •
4, 5 & 6 Tumbler Switchlocks
SWITCH AND LOCK FUNCTION
OPTION
CODE
NOTE: All orders keyed alike, standard. For more than one key code, master keying,
replacement keys, or other special features, consult Customer Service Center.
NOTE: Keys ar
B 5 TUMBLER LOCK
KEYING OPTIONS
2 NICKEL PLATED BRASS KEYS
2
(4 & 5 TUMBLER) or 2 DIE CAST CHROME
PLATED ZINC ALLOY KEYS (6 TUMBLER)
2 NICKEL PLATED BRASS KEYS, 4 & 5
6
TUMBLER ONLY
e available separately, see page M-10. Key head shape subject to change without notice.
KEYING
CODE NO.
ON KEY
CODE NO.
ON LOCK
NOYES
YESYES
KEYING
LOCK TYPE
V 6 TUMBLER TUBULAR LOCKC 4 TUMBLER LOCK WITH DETENT
M–6
A 4 TUMBLER LOCK (MOMENT
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
AR
www
.ittcannon.com
Y MODELS ONL
Y)
M
Switchlock
LOCK TYPE
Available with Lock Finish '2' only.
PC MOUNTING
SHORT ANTI-STATIC LOCK TYPES
C&K Y Series
4, 5 & 6 Tumbler Switchlocks
R 4 TUMBLER LOCK WITH DETENT AND
SHOR
T ANTI-STATIC SWITCH.
NOTE: For available option combinations, see page M-9.
U.S. Pat. No. 4,639,562 Exceeds 20 KV DC static resistance @ sea level, lock body to terminals.
2 STAINLESS STEEL
Available with
Lock Types ‘V’ & ‘W’ only.
W 6 TUMBLER TUBULAR LOCK WITH
LOCK FINISH
NOTE: For available option combinations, see page M-9.
ANTI-ST
F POLISHED NICKEL8 GLOSS BLACK
ATIC SWITCH
All Models Except Y190
Y190 Model Only
TERMINATIONS
WC WIRE LEAD02 PC THRU-HOLE 07 SOLDER LUG WITH HOLE
Black wire standard. other colors
and lengths available, consult
Customer Service Center.
UL style 1015.
WC WIRE LEAD02 PC THRU-HOLE01 SOLDER LUG WITH NOTCH03 SOLDER LUG WITH HOLE
Black wire standard. other colors
and lengths available, consult
Customer Service Center.
UL style 1015.
M–7
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www
.ittcannon.com
M
Switchlock
C&K Y Series
.136 DIA.
(3,45)
U
S
P
a
T
N
0
4
5
6
3
6
5
o
.655
(16,62)
.225
(5,72)
.100
(2,54)
.034
(0,86)
.468
(11,88)
.965
(24,51)
.688
(17,46)
1.000
(25,40)
.500
(12,70)
.470
(11,94)
.105
(2,67)
1.047
(26,59)
PANEL MOUNTING
Latch pawl shown in pos. 1.
PANEL MOUNTING
.125 thk.
(3,18)
1.010
(25,65)
.875
(22,23)
3/4 - 24 UNS
PANEL MOUNTING
4, 5 & 6 Tumbler Switchlocks
MOUNTING/LOCK STYLE
N WITH NUT D WITH CLIP
Nut part number: 175050700
R REMOVABLE DRESS NUT
TYPICAL INSTALLATION
Install hex nut with enough clearance to allow for
dress nut and panel. Place switch through cutout in
ear of panel. Install and tighten dress nut by hand,
r
then tighten hex nut. Always tighten assembly with
back of panel hex nut to avoid damaging front of panel.
Clip part number: 906B00000
OPTION
CODE
N
D
MOUNTING
STYLE
LOCK DIMENSIONS
LOCK TYPES
A, N
C, R
PANEL THICKNESS
.085-.105 (2,16-2,67)WITH NUT
.085-.105 (2,16-2,67)WITH CLIP
DIMENSIONS
‘A’
.270 (6,68)
.360 (9,14)
L REMOVABLE DRESS NUT WITH LATCH PAWL
NOTE: Removable dress nut not available with Y1900A model.
Specifications and dimensions subject to change
M–8
Dimensions are shown: Inch (mm)
www
.ittcannon.com
M
Switchlock
MOUNTING/LOCK STYLE
PANEL THICKNESS
MOUNTING
STYLES
A, B LOCK TYPES C, R LOCK TYPES V, W LOCK TYPES
D .065-.085 (1, 65 -2, 16) .085-.105 (2, 16-2, 67)
N .105 (2, 67) max. .195 (4, 95) max. .215 (5, 46) max.
L .215 (5, 46) max. –
R .125 (3, 18) max. .215 (5, 46) max. –
AVAILABLE OPTION COMBINATIONS
LOCK FINISHES LOCK TYPES
MOUNTING
STYLES
28 F ABCRVW
D
•• • • ••••
N
•• • • ••••
R
•••••
L
••••
•
•
EPOXY
.075 MAX.
(1,91)
CONTACT AND
OPTION
CODE
TERMINAL MATERIAL
RATING
Q
4 AMPS @ 125 V AC or 28 V DC;
2 AMPS @ 250 AC V AC (UL/CSA).
LOW LEVEL/DRY CIRCUIT
B
SILVER
2
POWER
0.4 VA MAX. @ 20 V AC or DC MAX
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES
YES
YES
YES
LOW LEVEL/DRY CIRCUIT
OR POWER
G
YES
YES
GOLD
1
GOLD SILVER
3
0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC
or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA)
Mounting Information (All Models)
C&K Y Series
4, 5 & 6 Tumbler Switchlocks
CONTACT MATERIAL
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
2
CONTACTS & TERMINALS: Copper, silver plated (std. with all termination options).
3
CONTACTS & TERMINALS: Copper, with gold plate over silver plate.
NONE NO SEAL
All models with all options when ordered with ‘G’ or ‘Q’ contact material.
SEAL
E EPOXY SEAL
M–9
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www
.ittcannon.com
M
Switchlock
C&K Y Series
4, 5 & 6 Tumbler Switchlocks
AVAILABLE HARDWARE
Key Code: A126
4 TUMBLER
PART NO. (ONE KEY)
115140126
Material: Brass
Finish: Nickel plate
Key Code: D001
5 TUMBLER
PART NO. (ONE KEY)
115441001
Material: Brass
Finish: Nickel plate
Key Code: AAAA
PART NO. (ONE KEY)
363C1AAAA
Material: Zinc alloy
Finish: Chrome plate
M–10
Specifications and dimensions subject to change
Dimensions are shown: Inch (mm)
www
.ittcannon.com
Loading...