City Theatrical DMX Vero Net, SHoW DMX VERO 7400-5708 User Manual
The 7400-5708
SHoW DMX Vero Net
Transceiver
User’s Manual
Rev 4
SHoW DMX Vero Net Transceivers are covered by U.S. Patent # 7,432,803 and other
© 2012 City Theatrical, Inc.
patents pending.
Radio Compliance Information .......................................................................... 3
Antennas .......................................................................................................... 4
5792 SHoW DMX Neo Radio CE Declaration of Conformity ......................... 7
System Compliance Information ....................................................................... 8
Safety Notices, Ratings and Power Requirements .......................................... 8
Introduction ....................................................................................................... 10
Setting up the 7400-5708 SHoW DMX Vero Net Transceiver ......................... 11
Installation ...................................................................................................... 11
Warning .................................................................................................................. 11
Important use notes .............................................................................................. 11
Grounding .............................................................................................................. 11
Mounting Bracket .................................................................................................. 11
Surface Mounting .................................................................................................. 11
Mounting Orientation ............................................................................................ 12
Pipe Mounting ....................................................................................................... 12
Cable or Conduit Entry ......................................................................................... 12
Mains Wire Installation and Termination ............................................................ 13
DMX512 Wire Termination .................................................................................... 13
Ethernet Cable entry ...................................................................................... 13
Installing the Cover ............................................................................................... 14
The 7400-5708 SHoW DMX Vero Net Transceiver Settings ........................... 14
Configuration ......................................................................................................... 14
SHoW ID ................................................................................................................. 15
Classic Mode Operation ....................................................................................... 15
Classic SHoW ID Tables ....................................................................................... 15
Neo Mode Operation ............................................................................................. 17
Neo SHoW ID Tables ............................................................................................. 17
Neo Adaptive Mode Operation ............................................................................. 19
Neo Adaptive SHoW ID Table ............................................................................... 19
7400-5708 Configuration Options ................................................................ 20
Adjustable Output Power ..................................................................................... 20
Limited Burst DMX Output ................................................................................... 20
RDM Operation .............................................................................................. 20
Optional or Custom Antenna Accessories .................................................. 22
DMX512 / Art-Net / sACN Control Input ....................................................... 22
The Jese GetSet RDM Controller ................................................................. 22
Operating the Jese GetSet RDM Controller: ............................................... 23
Notes on using RDM ...................................................................................... 25
Check/Change IP address .................................................................................... 26
Check/Change IP of Subnet Mask ....................................................................... 26
Check/Change IP of Gateway Address ............................................................... 26
Check/Change sACN Universe to Wireless or Wired ......................................... 27
Check/Change DMX Port Direction ...................................................................... 28
Check/Change Adaptive Hopping ........................................................................ 29
Check/Change DHCP Mode .................................................................................. 29
Page 2 of 29
Radio Compliance Information
5792 SHoW DMX Neo™ Radio Module
FCC ID: VU65792
IC ID: 7480A5792
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/ TV technician for help.
Radio Frequency Notifications
FCC Notifications
RF Radiation The Product is an intentional radiator of Radio Frequency (RF) energy. In order to
limit RF exposure to personnel in the immediate area, the Product should be located and installed
such that a separation of at least 20 centimeters is maintained between the Product’s anten na
and personnel in the vicinity of the device.
Modification Warning
Caution: changes or modifications to this equipment, not expressly approved by City Theatrical
Inc. could void the user’s authority to operate the equipment.
Industry Canada Notifications
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Product Installation and Configuration Guide © City Theatrical Inc. 2007
5792 Approved Antenna
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.
This device has been designed to operate with the antennas listed below. Antennas not included
in this list or having a gain greater than 5 dB are strictly prohibited for use with this device. The
required antenna impedance is 50 ohms.
Page 3 of 29
Antennas
The model: 5792 can be configured with any one of the approved antennas listed below
for fixed, point-to point one server and one client configuration. When the model: 5792 is
configured for point-to-multipoint one server and multiple clients’ configuration (client’s
talk to server only one at a time), client’s can use any of the approved antennas listed
below and the server can use any of the approved antennas listed below with the
exception of the 14dBi antenna.
5792 FCC/IC Approved Antennas:
Manufacturer Model Type Connector Gain
Nearson S151AH-2450S Omni whip SMA plug reverse polarity 5dBi
Nearson S141AH-2450 Omni whip SMA plug reverse polarity 2dBi
Nearson S131AH-2450 Omni whip SMA plug reverse polarity 2dBi
Omni whip,
Nearson DG102N-2.4/5.25
outdoor
use
SMA plug reverse polarity via
provided Antenna Cable
5dBi
Omni whip,
Tekfun F40-N
outdoor
Male N 4.5dBi
use
Centurion
Maxrad MP24008XFPT
Maxrad MYP24010PT
Maxrad MYP24014PT
WCP2400MMCX4
Omni whip MMCX jack on 4” coax pigtail 2.5dBi
Panel,
outdoor
use
Yagi,
outdoor
use
Yagi,
outdoor
use
SMA plug reverse polarity via
provided Antenna Cable
SMA plug reverse polarity via
provided Antenna Cable
SMA plug reverse polarity via
provided Antenna Cable
8dBi
10dBi
14dBi
5792 CE Approved Antennas:
Manufacturer Model Type Connector Gain
Nearson S151AH-2450S Omni whip SMA plug reverse polarity 5dBi
Nearson S141AH-2450 Omni whip SMA plug reverse polarity 2dBi
Nearson S131AH-2450 Omni whip SMA plug reverse polarity 2dBi
Nearson DG102N-2.4/5.25
Tekfun F40-N
Centurion
WCP2400MMCX4
Omni whip,
outdoor use
Omni whip,
outdoor use
Omni whip
SMA plug reverse polarity
via provided Antenna Cable
5dBi
Male N 4.5dBi
MMCX jack on 4” coax
pigtail
2.5dBi
Page 4 of 29
For installations governed by FCC and/or IC rules, any of the approved antennas listed
above may be used with the SHoW DMX Vero Transceiver (please note the special
installation requirements for use with the CTI # 5636 14 dBi Yagi Antenna).
Please note that some of the antennas listed are intended for indoor use only.
For use in locations governed by CE rules, some antenna restrictions apply. Antennas
from the 5792 CE Approved Antennas meet all requirements. Contact City Theatrical
for details.
ETSI power settings for all 5792 SHoW DMX Neo Radio module equipped products,
including the SHoW DMX Vero Transceiver, are based on use with the CTI 5630 5 dBi
Omni Antenna. ETSI power and range will vary with the antenna used. Contact your
dealer or City Theatrical for more information. CE Mark Conformity
City Theatrical Inc. declares that this product conforms to the specifications listed in this
manual, following the provisions of the European R&TTE directive 1999/5/EC:
CE Mark Conformity
City Theatrical Inc. declares that this product conforms to the specifications listed in this manual,
following the provisions of the European R&TTE directive 1999/5/EC:
City Theatrical Inc. vakuuttaa täten että dieses produkt tyyppinen laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojen mukainen.
City Theatrical Inc. déclare que le produit est conforme aux conditions essentielles et aux
dispositions relatives à la directive 1999/5/EC.
• EN 301 489-1, 301 489-17 General EMC requirements for Radio equipm ent.
• EN 60950 Safety
• EN 300 328 Technical requirements for Radio equipment.
CAUTION—This equipment is intended to be used in all EU and EFTA countries.
Outdoor use may be restricted to certain frequencies and/or may require a licen se for o peration.
Contact local Authority for procedure to follow.
Note: ESD precautions should be used when attaching or removing the antenna.
Note: Combinations of power levels and antennas resulting in a radiated power level of above
100 mW equivalent isotropic radiated power (EIRP) are considered as not compliant with the
above mentioned directive and are not allowed for use within the European community and
countries that have adopted the European R&TTE directive 1999/5/EC. For more details on legal
combinations of power levels and
antennas, contact City Theatrical Inc.
Do not use this product near water, for example, in a wet basement or near a swimming pool.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock
from lightning.
Product Installation and Configuration Guide © City Theatrical Inc. 2011
Q52 Regulatory information
Radio Frequency Notifications
Belgique Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace
public, aucun enregistrement n'est nécessaire pour une distance de moins de 300m. Pour une
distance supérieure à 300m un enregistrement auprès de l'IBPT est requise. Pour une utilisation
publique à l'extérieur de bâtiments, une licence de l'IBPT est requise. Pour les enregistrements et
licences, veuillez contacter l'IBPT.
France 2.4 GHz Bande : les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz
respectivement) sont complétement libres d'utilisation en France (en utilisation intérieur). Pour ce
Page 5 of 29
qui est des autres canaux, ils peuvent être soumis à autorisation selon le départment. L'utilisation
en extérieur est soumis à autorisation préalable et très restreint. Vous pouvez contacter l'Autorité
de Régulation des Télécommunications
(http://www.art-telecom.fr) pour de plus amples renseignements.
Page 6 of 29
5792 SHoW DMX Neo Radio CE Declaration of Conformity
Page 7 of 29
System Compliance Information
The 7400-5708 SHoW DMX Vero Net Transceiver is ETL Listed,
Conforms to UL 508A
The 7400-5708 SHoW DMX Vero Net Transceiver is CE Certified
Standards Applied:
EN 55203-1: 2009, Environments E4 and E5
EN 55203-2: 2009, Environments E1, E2, E3, E4
EN 301 489-1 V1.8.1
EN 301 489-3 V1.4.1
EN 60950-1:2006 / A1:2010
FCC Rules, Part 15, Subpart B, Sections 15.107 and 15.109
Products Conform to CE Marking Directive 93/68/EEC
All SHoW DMX Neo models are RoHS compliant
Safety Notices, Ratings and Power Requirements
Please read this entire manual before using your new equipment. Please keep the
manual in a safe place so you can refer to it in the future as required.
The SHoW DMX Neo System is intended for use only by qualified professionals.
Connection, installation and hanging of this equipment must be performed in accordance
with all pertinent local, regional and national safety codes and regulations.
The 7400-5708 SHoW DMX Vero Net Transceiver is intended for indoor or outdoor use.
The unit enclosure is rated NEMA 4 / IP66.
Rated operating voltage; 100-240VAC 50/60 Hz, 1A max.
This device must be provided with a 20A branch circuit breaker or equivalent suitable
external disconnecting device.
Maximum operating temperature: 0°C - 40°C.
Warning: The 7400-5708 SHoW DMX Vero Net Transceiver must be mounted
exclusively in an upright mounting position with the cable entries on the bottom and
antenna connector on the top as shown in the Installation guide. See the Installation
Guide in this document for details.
Page 8 of 29
RF Exposure: The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20cm from all persons and must not be collocated or
operating in conjunction with any other antenna or transmitter.
Page 9 of 29
Loading...