City Theatrical QolorPoint 7000, QolorPoint 7010 Quick Start Manual
475 BARELL AVE, CARLSTADT, NJ 07072
800/230/9497 201/549/1160 201/549/1161 FAX
www.citytheatrical.com
QolorPoint
P/N 7000 (individual unit)
P/N 7010 (six units & ight case)
Battery Powered LED Uplighter
Quick Start Guide
Rev 1.01
REMOVABLE
SHROUD
LED EMITTERS
CHARGING AND
MAINS PSU PORT/
CABLE DMX OUTPUT
PIN
PIVOTING HEAD
HANDLE
SHoW DMX ID
INDICATOR
SHoW DMX ID
SELECT
The City Theatrical QolorPoint xture is a battery-powered
wireless uplighter capable of providing portable and
instant architectural and feature lighting anywhere. With
high-powered red, green, blue and white LEDs the xture
is capable of producing any color or shade of white using
combinations of those LEDs. Ideal for illuminating
buildings in color, both indoors and outdoors, the xture is
powerful enough to light buildings of 3 or 4 stories.
Lighting effects may be created by connecting to effects
BATTERY STATUS ICON
LED CHARGING
INDICATOR
POWER SWITCH
generators such as lighting desks or other City Theatrical
Master units using the built-in SHoW DMX receiver.
Alternately, QolorPoint xtures may be used to create
dramatic stand alone systems as each unit comes preprogrammed with a variety of color/effect features. Set up
is fast and easy...follow the instructions in this quick start
guide. Refer to the complete product manual for more
detailed operational information and specications.
©2015 City Theatrical, Inc.
Remove power cable from ight case and attach the appropriate edison connector to the cut
1
end. Attach power cable to receptacle on side of ight case and connect to mains power supply.
supplied. Be sure to open lid of case while charging to prevent heat build-up.
Conrm that the three charging studs on the bottom of each unit are aligned and seated in
their corresponding holes in the bottom of each storage/charging compartment in the ight
2
case. When seated properly, the charging LED will be lit amber on each unit. When fully
charged the LED will turn green (approximately 6 hrs.)
User interface
Buttons LEDs
POWER
FN
FUNCTION
UP
Turn units on
and off.
DOWN
Select desired
operation mode,
change settings
SELECT
Scroll to next
menu item
SHoW ID
Scroll to
previous
menu item
Accept /
Enter
Change
SHow ID
Stand Alone Operation
For use without an external lighting console/controller,
QolorPoint uplights may be operated individually
or in synchronized groups. Every QolorPoint unit
has the ability to transmit or receive control data
to/from the other units being used. By setting
multiple units to the same SHoW ID, and then
selecting one unit to be the transmitter (master),
they can be operated as a synchronized system
with all units duplicating the actions of the master.
SHoW IDs
SHoW
DMX
ID
CHARGING
201
SHoW
DMX
ID
CHARGED
133
SHoW
DMX
ID
102
SHoW
DMX
ID
149
SHoW
DMX
ID
117
SHoW
DMX
ID
165
For Stand Alone use, there are three modes of
operation which can be accessed through the
main function menu: Custom Color, Static Color
and Effects. Both Custom and Static color modes
are used where specic colors are needed for
non-changing display.
The Effects mode allows use of one of six
different dynamic programs each of which may be
tuned for optimal display.
Loading...