CityGrow CG102IR-AC, CG100HTH-IR User Manual
i
CG102IR-AC
CG100HTH-IR
AIR-CONDITIONER IR CONTROL KIT
USER MANUAL
VERSION 0.0
12 SEPT, 2014
Disclaimers and Copyright
Nothing contained in this publication is to be construed as granting any right, by implication or otherwise, for the
manufacture, sale, or use in connection with any method, apparatus, or product covered by letters patent, or as
insuring anyone against liability for infringement of letters patent.
Efforts have been made to ensure the accuracy and reliability of the data contained in this publication; however,
Citygrow Energy Systems Limited. makes no representation, warranty, or guarantee in connection with this
publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or
from the use of any product or methodology described herein; for any violation of any federal, state, or municipal
regulation with which this publication may conflict; or for the infringement of any patent from the use of this
CG102IR-AC
ZigBee IR Transmitter
CG100HTH-IR
ZigBee IR Transmitter
ii
publication. Nothing contained in this publication should be viewed as an endorsement by Citygrow Energy Systems
Limited. of any particular manufacturer’s products.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE
PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards.
There are, however, some installation and operation precautions which you should be particularly aware of.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce
heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
1
Table of content
1. Introduction ................................................................................................ 1
2. Understanding of the product –CG102IR-AC .................................................. 2
......................................................................................................................... 2
3. Understanding of the product-CG100HTH-IR .................................................. 4
4. Configuration of CH100TH-IR and CG102IR-AC .............................................. 6
4.1. Apply network information to the devices............................................ 6
4.2. Binding the control between CG100HTH-IR and CG102IR-AC ................ 6
4.3. Learning IR signal of air-conditioner to the CG102IR-AC ....................... 7
4.4. Example of learning air-conditioner IR signal ..................................... 11
5. Installation ................................................................................................ 15
6. Operation instruction ................................................................................. 18
7. Specification.............................................................................................. 19
1
1. Introduction
Thank you for buying Citygrow’s product. CG102IR-AC plus CG100HTH-IR works as a
pair. CG100HTH-IR will be mounted on the wall as a thermostat and temperature
setting panel, the CG10IR-AC will be mounted nearby the air-conditioner that can be
controlled by infra-red remote.
CG102IR-AC
CG100HTH-IR
CG102IR
ZigBee IR
Transmitter
IR extension cable
(included)
CG101AD
mini power supply
(Not included)
Power adaptor
(included)
CG100HTH-IR
ZigBee IR Transmitter
CG101AD
mini power supply
(Not included)
2
2. Understanding of the product –CG102IR-AC
Main unit
IR extension cable
connector
Face cover
IR lens
Main unit (Front view)
Main unit (Rear view)
Wall mounting
hole
Reset
Function (Test)
IR TX LED
IR Learn LED
Programming connector
DC Jack
Stand
Mounting hole for ceiling
mount
3
Dimension – CG102IR-AC
87mm
87mm
22mm
28mm
100mm
Main unit
Stand
4
3. Understanding of the product-CG100HTH-IR
Frame
Button panel (front
view)
Button panel
(bottom view)
Bracket
(bottom view)
Bracket
(front view)
Temperature
display window
Programming
port
Reset button
Metal clip to fix
the button panel
Mounting
hole
Connector to
button panel
Power terminals for connected
to external power supply
CG101AD
6V -
DC 6V input from
CG101AD
6V +
6V -
DC 6V output
terminal
6V+
Model number
plate
Model number
plate
Connector to
Bracket
Control
button
Temperature
sensor
Loading...