MULTI-TOUCH-MONITOR MTIR-FR02-V1
5
1 Precautions
Please carefully read these instructions before you
start. Failure to follow these instructions may result in
damage or personal injury
1.1. General Safety
· The unit must be set-up by authorized and
qualified personnel only.
· Always obey relevant local safety regulations.
· Setting up should be performed by two persons.
· MTIR-FR02-V1 Multi-Touch-Monitor should only
be used with the specified input voltage conditions
(see section 7.1)
· Use only with suitably earthed mains sockets
· Any extension leads used should be of a suitable
specification and suitably earthed
· Modification of protective earth connectors inside
or outside the device is dangerous and not
allowed.
· Do not use the device if it or it’s cables are
damaged in any way
· Unplug the device before attempting any cleaning
or maintenance operations. Unplug the device
when not in use for prolonged periods
· During cleaning do not permit liquids to enter the
device.
Do not use the device near water or other liquids,
there is a danger of electrical shock.
· Take care to route all cables in a way that nobody
can trip or get caught.
· Repair of MTIR-FR02-V1 by un-authorised
personnel is
not allowed. Electrical works should
be undertaken by a professional electrician only.
· The device housing should
not be opened or
removed by un-authorised personnel.
. Safety features on the device should not be
removed or by-passed
· No modifications or alterations are allowed for
safety reasons
· Please also read and follow the precautions for
the Canvys PD-CP32AH LCD-monitor .
1.2 Shipment and Transportation
Please check device for Damage and shortages
immediately upon receipt. Claims for Damages or
missing parts should be made immediately
To avoid damage, to the LCD screen or the front glass
window, always transport the device in an upright
position only.
1.3 Operation
The monitor with multi-touch functionality as described
herein may be operated in a vertical or horizontal
position.
By using appropriate stands the monitor can be on a
suitable desk or table-top, it may also be integrated
within a table, or mounted to a wall by using
appropriate mounting fixtures.
For further installation instructions please see the
original PD-CP32AH manual. When designing your
mounting please be sure to allow for sufficient
ventilation of the device
Any other use is allowed only with written permission
from the manufacturer.
If the device is modified or used in any other way all
warranty and warranty claims are void.